How long does it take to wash the oil on the watch, and how much does it cost to maintain the oil on

So how long does it take to wear a watch before it needs to be washed? It is determined by the following factors: 1. The sealing problem of the watch.

As long as the case is tightly sealed, there will be no gas, water vapor, dust, fibers and other foreign substances entered, so that the watch oil is not easy to deteriorate and volatilize, the movement is not easy to rust, and it is not easy to appear small impurities between the gears and parts, and the movement is relatively "clean". 2. The degree of wear (wear and tear) of the watch. If you always carry the same watch every day, then under frequent use, the degree of wear of the parts will be great, on the contrary, if the watch is basically left uncarried, then the degree of wear of the parts will be small.

I have had many watches that have been shelved for up to 15 years, and now I take them out to test a few of them, and their performance indicators are still qualified. The swing is quite high, and the time is also very accurate. 3. Quartz watches can extend the oil washing cycle.

"Sludge" has less effect on watches with relatively large body sizes than watches with relatively small sizes, while thin or women's watches have a shorter oil washing cycle, and some watches even have to be cleaned at least once every two years. 5. It is related to the material, process and lubricating oil used in the watch parts. The materials used in the watch include some key parts, such as:

Escape wheels and pallet forks are better if they are made of steel with a polished working surface, and special oil-retaining devices (e.g. with a drilled caphole, a watch movement with a larger number of diamonds) and oil-resistant diffusion treatments (e.g. stearic acid) are certainly better than not. In the early years, the Swiss boss of the Enicar watch factory once said that my watch does not need to be washed for at least 5 years, because my watch uses the watch oil of Maubis new9010 (it is a small blue medicine bottle), and the swing of the watch can be increased by an average of 20 degrees with this oil, coupled with their patented stop-oil anti-oil diffusion treatment technology, it can greatly extend the washing cycle, but he said, Once the ENICAR watch has been washed in the Chinese way, it will need to be washed every two years. 6. Expensive watches need to be carefully washed with oil.

You must know that the watch is basically not broken but repaired, and expensive watches need to choose a designated repair shop and maintain them in accordance with the standards of Swiss manufacturers (disassembly, testing and refueling). 7. Watches that do not do oil washing maintenance for a long time. Such a watch may find that the parts have been worn and damaged when the oil is washed.

In short, the washing oil of the watch is the same as the human body, once you find that it is getting worse and worse, you should calculate the time from the last time you washed the oil to the present. Consider whether your watch needs to be cleaned, and a good watch repair is the key to ensuring and extending the uptime of your watch.

As a general rule, cleaning once every 3-5 years is good for delaying the service life of the watch.

Around 500.

1. It takes 200 to 500 yuan to maintain the watch once, and different brands and models are different.

2. In the process of using the watch, the lubricating oil on the various parts of the movement will gradually volatilize and dry up over time, and the friction between the gears will produce some metal chips, resulting in an increase in resistance when rotating.

3. No matter how well sealed the watch is, bumps and bumps in daily life will still cause some fine dust and water vapor to invade the movement from the cracks of the case, and form dirt over time.

How to care for your watch.

1. When wearing a watch, the sweat on the hands is corrosive to the case, the all-steel case is nickel-chromium alloy, the corrosion resistance is better, the semi-steel case is copper, long-term contact with sweat, easy to corrode, should often wipe off the sweat with a soft cloth or pad the plastic watch holder to prevent it from being eroded by sweat.

2. Do not open the back cover of the watch at will, so as not to enter the movement and affect the normal operation of the watch.

3. Do not put the watch in the wardrobe with mothballs to avoid the deterioration of the watch oil.

4. Do not put the watch on the power amplifier, stereo, or TV to avoid magnetization.

5. Watches that are not worn for a long time should be wound regularly once a month, and watches with automatic movements should be gently swung back and forth for a few minutes or worn on the wrist for a period of time to make them automatically wind. The parts will not be in a stationary state for a long time to ensure the running performance of the watch machine.

Care instructions. 1. After the watch is used for a period of time, it is necessary to disassemble and assemble the movement parts for cleaning and lubricating oil. The oil washing and maintenance of the watch is a very important after-sales work, generally 2-5 years, and Rolex needs to wash the oil once every 5-7 years.

2. In addition, while checking the movement failure, adjusting and repairing parts, it is also necessary to wash the oil of the watch movement when problems are found, because the movement will produce impurity dust into the sealed movement after repair, so it is very necessary to carry out the oil washing procedure.

3. The purpose of washing oil is to keep the watch parts clean and the necessary lubrication of the parts, so as to ensure the precision of the watch parts, improve the accuracy of the watch and prolong the service life of the watch.

Mechanical watch oil washing and maintenance is about 1000 yuan at a time.

Depending on the specific model, such as quartz watch or mechanical watch, classic big three hands, complication model, etc., the cost of maintenance of different watches is different, ranging from about 600-1300 yuan. It is recommended to go to a professional watch shop for maintenance.

A complete warranty service for your watch by a professional watch dealer:

a) Basic movement maintenance service (limited to the case of defects in the manufacture of the watch movement itself or dysfunction of the watch movement itself.)

Checking the function of the movement and disassembling the movement as necessary;

Replace the weathered waterproof ring, depending on the condition of the movement, replace the necessary worn and aged movement components;

b) Appearance maintenance service:

cleaning of the case, strap and buckle;

Conduct waterproof testing;

The watch is tested to ensure that it meets the reliability and functionality standards set by the brand. <>

For the cleaning of the watch, you need to choose a special cleaning liquid, and you also need to use a special cleaning tool. Choose professional cleaning tools for the cleaning liquid of the watch, such as hydrocarbon solvents (gasoline), chlorine-containing solvents, finished watch washing oils imported from Switzerland, mixed solvents, etc. If the stainless steel strap is to be cleaned, you can remove the stainless steel strap of the watch, put the strap into a container with detergent boiling water and soak it for about 15 minutes, so that the closely connected strap buckle, use the principle of thermal expansion and cold contraction to open the gap, and then gently brush with a toothbrush, brush almost and then put it in cold water and soak it for another 15 minutes, so that the dirt will run out, and the gap will be naturally restored, and finally pick up the rinse and wipe it and dry it naturally.

For watch parts, because washing in water will cause rust on the parts, it is necessary to choose a professional cleaning liquid. After disassembling the watch, all the parts of the watch can be put into the gasoline cylinder and the cleaning solution is poured to clean the watch parts.

The strap of the watch can be cleaned with soapy water, alcohol, vinegar or toilet water. If the leather strap of your watch smells bad, you can make your own soapy water and wash it on the strap with a toothbrush dipped in soapy water to remove dirt. It is also possible to spray alcohol on the strap, which will have a germicidal effect on the band of the watch and also eliminate areas of mold on the watch.

For the metal bracelet of the watch, the above method can also be used for cleaning. However, the joint of the metal strap is difficult to clean due to the narrow gap, so you can use a toothpick, wrap a little cotton around the end of the toothpick and dip it in alcohol to remove the stains in the dead corner.

If there is dust on the dial of the watch, rinse it with water. However, the waterproof of the watch should meet a certain standard, and the watch handle should be locked and brushed with a brush, so that the dial of the watch can be cleaner.

The old method is simple and effective: using a paper towel dipped in toothpaste to clean the effect is good, and it can also remove small scratches, which is a common maintenance method.