How to connect to the company s intranet outside the company

What is the status of your company's network?,To make it clear.,Your company's intranet can be connected to the Internet through the router.,This should be there.,And then you want to connect to the company's internal computer.,This?,You should know the password of the router.,Then this has to be set up on the router.,Expose the settings you want to connect to.,You can connect to the external network.。 Other broken ports are very difficult to force into the hard disk of your company's internal computer. You have to bypass the system, if you know the vulnerabilities of the windows system, you can use it, you can also use it, the data is in the hard disk, it is recommended not to use the network, unless you are a super programmer, understand a lot**, Microsoft's source**, otherwise you can't access the data on the remote computer as you like, and some Trojan virus programs can't.

The most straightforward way is to install the software on the company's machine, and then upload it to the sharing, so that it can be called anywhere, QQ sharing, and other ** software, as well as network disks, which can also be used. In addition, if you want to use the company's intranet network, you can install a hidden wireless router, connect to the company network, and set the IP of the company's intranet. There are only two numeric frequencies of 0 and 1 on the network cable, so let's think about it slowly.

If the company allows it, you can open 3389 for remote assistance, if you don't want the company to know.

Then you can run a gray pigeon Trojan on the machine you want to log into, and then you can connect unconditionally outside.

Want to be a hacker? It depends on whether there is a mid-end connection between the company's internal network and the external network, if it is separated, then don't think about it, if there is, it will be easy to do...

Here's how to connect to the company's intranet:

1. The premise of connecting to the company's intranet is that the computer can be connected to the network; Click Start - Control Panel - View Network Status and Tasks or click "Open Network and Sharing Center" in the network connection in the bottom right corner, and click "Set up new connections and networks".

2. Scroll down and click "Connect to Workspace";

3. Click [No, create a new connection], if the remote connection has been created;

4. Choose the first item, which is to ensure that the computer can access the Internet. Enter the public IP address provided by the NMS and the company in the Destination Name.

5. Type in the user name and password given by the company's network management, and click to connect without filling in the domain. If the input is accurate and the company NMS does set V-P-N, you can connect to the company's intranet.

6. After the addition is successful, you will see this v-p-n: company in the network connection in the lower right corner of the screen, click [Company] - [Connection] to connect to the company's intranet.

Note:If you do not have access to the Internet in the company's intranet, you will not be able to connect.

Connecting to the company's intranet requires compliance with the company's cybersecurity regulations, and may require proof of identity, signing a security agreement, etc. Here are some common ways to connect to your company's intranet:

Connect via VPN: You can connect to your company's intranet through a virtual private network (VPN), which protects the security of data transmission through encryption. However, it's important to note that using a VPN may violate the laws of some countries or regions, so you need to use it with caution.

Use Server Cluster: You can install server software on your personal device and connect to the company's intranet through the server. This approach protects personal IP addresses and increases security.

However, the server may filter out some of the company's network resources, affecting work efficiency.

Through port mapping: Enables corporate network services to be accessed through the ports of personal devices. For example, if the web server used in the corporate network exposes port 80, you can map the web browser port of the personal device to port 80 in the corporate network to access the corporate web server from the personal device.

Regardless of the method used, you need to comply with your company's cybersecurity regulations and take care to protect your personal data and privacy.

How to connect to the company intranet at home. 1.Click Start - Control Panel - View Network Status & Tasks or Click "Open Network & Sharing Center" in the network connection in the bottom right corner, and click "Set up new connections & networks".

2.Drop down a bit and click on "Connect to Workspace" and ignore the rest. 3.

Click No, create a new connection. 4.Type the public IP address provided by the company NMS on the Internet.

Type Company in the target name. 5.Type in the username and password given to you by the company's network administrator, do not fill in the domain, and click Connect.

6.After the addition is successful, you can see this v-p-n: company in the network connection in the lower right corner of the screen, click [Company] - [Connection] to connect to the company's intranet.

In this way, the problem of using the unit's intranet with a home computer is solved.

To connect to a company's internal LAN, you typically need to use a virtual private network (VPN) or remote port mapping (intranet traversal). Here's a brief introduction to the two connection methods:

Connect using a VPN: A VPN is a technology for establishing a secure connection over a public network. By connecting to the company's internal network through a VPN, you can use the company's resources as if you were in the office.

Use intranet penetration, use intranet penetrating software such as sunflower, map the port of the company's intranet server to a computer with a public IP (such as a cloud server), and then access the IP: port of the cloud server to achieve the purpose of accessing the company's internal computer.

Code words are not easy, I hope or I hope to help you! Beg.

The reasons for the failure to connect to the company's intranet are as follows:

1. Network failure.

The failure to connect to the company's intranet may be caused by network failures, such as router failures, network line failures, network equipment failures, etc.

2. IP address conflict.

If multiple computers use the same IP address, the company intranet cannot be connected, and you need to check whether the IP address of the computer is correct.

3. Firewall settings.

The company's intranet connection may be caused by the firewall settings, for example, the firewall blocks the access of certain ports, and you need to check whether the firewall settings are correct.

4. DNS solves the problem of slag analysis in Senchang.

If the company's intranet cannot be connected to the Internet, it may be caused by DNS resolution issues, and you need to check whether the DNS server settings are correct.

5. Permission issues.

If you cannot connect to some resources on the company's intranet, it may be caused by insufficient permissions, and you need to check whether the permissions are correct.

How to solve the problem of not being able to connect to the company's intranet:

1. Check network faults.

If the company's intranet cannot be connected, you first need to check the network faults, such as router faults, network line faults, network equipment faults, etc., and repair the faults in time.

2. Check IP address conflicts.

If you cannot connect to the company's intranet, you need to check whether the IP address of the computer is correct to avoid IP address conflicts.

3. Check the firewall settings.

If the company's intranet connection is not available, you need to check whether the firewall settings are correct, for example, whether the firewall blocks the access of certain ports, and adjust the settings to prevent this quiet firewall in time.

4. Check the DNS resolution problem.

If the company's intranet cannot be connected to the Internet, you need to check whether the DNS server settings are correct and fix the DNS resolution problem in a timely manner.

5. Check the permission problem.

If you cannot connect to some resources on the company's intranet, you need to check whether the permissions are correct and adjust the permissions in time. <>

1. Many companies offer VPN services, and employees can use VPNs to connect to the company's intranet. The benefit of using a VPN to connect to an intranet is that you can access the company's land resources from anywhere without having to be in the company's office.

2. If the company does not provide VPN services, employees can use remote desktop connections. A remote desktop connection is a method of remotely controlling a computer that uses the resources of the local computer on the remote computer. Employees can use a remote desktop connection to connect to a company's computer, and then access intranet resources on the company's computer.

3. Use the first server, if the company's intranet resources can be accessed through the first server, employees can use the first server to connect to the intranet. A server is a server that sits between a public network and an internal network and can act as an intermediary between the internal and public networks. Employees can set up a server on their local computer and then use the server to connect to the intranet.

4. Contact the IT department, if the problem cannot be solved by the blind method, the employee can contact the company's IT department. The IT department can provide more detailed help and support to ensure that employees can connect to the company's intranet.