-
Anonymous users2024-02-06The parameters of the set software are incorrect.
-
Anonymous users2024-02-05If you use a CF card for DNC machining, you do not need to set the parameters. Here's how:
1. Set the IO channel to 4;
2. Select DNC mode;
3. Select the memory card list display screen, enter the program number to be run, and press the soft key DNC setting to select the program to run;
4. Press the cycle start switch to carry out DNC transmission operation.
DNC (Distributed Numerical Control) is a commonly used manufacturing term for networked CNC machine tools. Its essence is a numerical control system distributed in the workshop composed of a computer and a machine tool group with a numerical control device using computer network technology. The system is like a unified whole for the user, the system integrates a variety of general physical and logical resources, and can dynamically allocate CNC machining tasks to any processing equipment.
It is a powerful means to improve equipment utilization and reduce production costs, and it is the development trend of the future manufacturing industry.
-
Anonymous users2024-02-04You don't need to set any parameters Ah,Put the operation panel on the DNC transfer and press the program will come out at the bottom of a line of options,Then press the memory card to select the program you want to choose。
-
Anonymous users2024-02-03Channel selection 4, and external equipment can be used.
-
Anonymous users2024-02-02Different number of pins have different connections:
If it is 25 for 9 pins, the connection method is as follows:
2 of 9 pins and 2 of 25 pins
3 of 9 pins and 3 of 25 pins
5 of 9 needles and 7 of 25 pins
9 pins connected;
9 pins connected;
25-pin joint;
25-pin joint;
Remember to define important parameters such as communication protocols when using it for the first time.
1) Serial communication cables generally use 7-core or 9-core shielded cables, and the communication distance should not exceed 30m.
2) Baud rate: The transmission speed is generally between 110 1125000, and 4800 or 9600 is usually used.
3) Data bits: can be selected between 5 and 8, generally 7.
4) Stop bit: It can be 1 or 2, generally 2.
5) Check: It can be even, odd or none.
6) Handshake signal: can be XON Xoff, CTS RTS.
Note: The parameter settings of 2-5 above must be the same as the settings of the CNC system parameters.
-
Anonymous users2024-02-01The network cable interface is RJ-45, or the transmission can be carried out with a CF card.
-
Anonymous users2024-01-31Are you 25 for 25 or 25 for 9 pins? Different number of pins have different connections:
Mao Xuewang's practice.
Main and auxiliary materials: duck blood, shutters, eel, yellow throat, fungus, bean skin, enoki mushroom, sandwich. >>>More
Gems can't be inserted randomly, it depends on what talent you have, what equipment, for example, you are destroyed, the red hole is inserted 40ap, the yellow hole is inserted 20ap10 quickly, and the blue one only needs to insert a 10 attribute to activate your colorful. However, when your panel AP is very high, you can change the yellow one to 20 haste, but add your jewelry processing, and plug the red holes on the three equipment on your body that you think should be difficult to change 68AP So that you are a combat talent, and you plan to play combat And your combat talent equipment has 500+ armor piercing without gems, you can insert 20 armor piercing on the premise that your hit is accurate enough, if your armor-piercing equipment is not so ideal, or replace it with Sensitive Storm.
The machining center has more Y-axes than CNC lathes, and CNC lathes only have X, Z axes.
It turns out that beeswax beads are made in this way, and it looks very simple, but it should be difficult to learn.
Do you have a client in your home country? It's not very clear how you got out, it can't be that you didn't declare it, right? To do the import processing manual, the most critical point is that the import of raw materials is duty-free, how many raw materials are imported, according to the proportion of materials used in the processing manual, you have to export how many finished products, otherwise the problem is serious, if your contract manual is not registered, fine, punish you stupid! >>>More