Wi Fi can t connect to the wLAN network?

Updated on technology 2024-02-09
15 answers
  1. Anonymous users2024-02-05

    If the WLAN service cannot be handled, it may be due to the following reasons:

    1.The WLAN experience service in some provinces has ended on August 31, 2013, you can contact human customer service for confirmation.

    2.WLAN services cannot be used in the state of arrears and shutdown of mobile phones.

    3.If the WLAN service instruction is correct, you can send SMS "TYWLAN" to 10010 to apply for the service.

    Activate and cancel WLAN services in business halls, mobile phone business halls, and SMS business halls.

  2. Anonymous users2024-02-04

    The wifi itself is faulty, the wifi may not be connected normally, resulting in the inability to access the Internet;

    Router problems, which may be overheated or damaged;

    There may be broadband arrears, resulting in inability to access the Internet;

    The wifi name contains Chinese, which causes some mobile phones to be unable to connect to the Internet;

    There may be a problem with the mobile phone system, which causes the connection to wifi but cannot access the Internet.

  3. Anonymous users2024-02-03

    If you cannot use the WLAN service, you can troubleshoot the faults as follows:

    1) Check if you can receive it"chinaunicom"WLAN signal;

    2) If you can receive it, can your wireless network card automatically get the IP;

    3) If you can automatically obtain the IP and enter any ** in the browser, can the authentication page appear?

    If none of the above conditions can be used, please contact our 10010 customer service to check whether the WLAN is turned off.

  4. Anonymous users2024-02-02

    Shut down and restart to try it.

  5. Anonymous users2024-02-01

    You turn on the switch, and you can't connect to the correct password when you search nearby?

  6. Anonymous users2024-01-31

    Sometimes when you use your mobile phone to connect to a wireless network, there will be a mobile phone WLAN that cannot be connected or there is a wireless network signal, but you just can't connect to the Internet, what is going on? Let's take a look.

    See if it's a phone problem.

    1. Check whether to turn on airplane mode, if it is airplane mode, then it will definitely not be able to connect to the wireless network.

    2. Check whether the mobile phone is short of power, sometimes it is impossible to connect to the network due to lack of power.

    3. If it is not the above 2 reasons, then take your mobile phone to the closest place to the router and try it.

    4. If it doesn't work, then restart the phone and see if it can connect.

    5. If it still doesn't work, open the wireless network settings and advanced settings of the mobile phone, and set the WLAN sleep setting to "never".

    See if it's a router problem.

    1. Check if the password of the router has changed, causing the phone to be unable to connect?

    2. Check the indicator light of the router to see if it is disconnected.

    3. Then open and look at the settings, is there any wireless cancellation?

    4. Restart the wireless router to see if it is solved.

    1. First of all, check whether the router is connected to the external network, log in to the router management interface, and see whether the WAN port parameter is non-0 at the running status - WAN port status, if it is 0, please set it again according to the router quick setup guide.

    2. Manually set the IP static address; Press and hold the signal name of the corresponding wireless router and select Modify Network.

    3. Select Advanced Settings.

    4. Click IP Settings and choose to use static IP

    5. Enter the IP address manually

  7. Anonymous users2024-01-30

    I can't connect to the network, which means that it may be good to restart your phone.

  8. Anonymous users2024-01-29

    If you can't connect to the network, there should be a problem with the network signal.

  9. Anonymous users2024-01-28

    There are several reasons why your phone is connected to wifi but you can't access the internet

    1. The wifi itself is a problem, and the wifi may not be connected normally, resulting in the inability to access the Internet.

    2. Router problems, the router may be overheated or damaged.

    3. Broadband arrears may lead to inability to access the Internet.

    4. The wifi name contains Chinese, resulting in some mobile phones unable to connect to the Internet.

    5. Problems with the mobile phone system, there may be a problem with the system, resulting in a connection to the wifi but unable to access the Internet.

    Suggested workaround:

    1. Use other mobile phones or Yusen devices to connect to wifi to try whether you can access the Internet, and rule out the wifi itself.

    2. Restart the router to try, or restore the router to factory settings, then dial up the Internet again, and reset the wifi according to the setup wizard, or change to a new router and dial up to connect to the Internet.

    3. Contact broadband customer service to confirm whether there is any abnormality in the broadband, such as arrears, recharge the broadband, and then dial up the connection.

    4. If the wifi name contains a good text, it is recommended to modify it to English or a combination of English and numbers before connecting.

  10. Anonymous users2024-01-27

    It should be that the wifi you are connected to is not available if there is a problem, so it is recommended that you try to change the wifi or try to reconnect.

  11. Anonymous users2024-01-26

    What should I do if the mobile phone is not even rubber, and the beam is not changed, but the wifi is prepared.

  12. Anonymous users2024-01-25

    Hello. You can set up your phone by following the steps below:

    1.Click Settings --Wi-lan, select the arrow next to the name of the network you want to connect to, select Don't save the network, and re-enter the password.

    2.Restart your phone and routing device.

    3.Still doesn't work, I recommend you try other wifi networks to see if it works.

    If it can be used normally in the environment of other WiFi routing devices, then it may be caused by the current problem of the routing device itself.

  13. Anonymous users2024-01-24

    The first screenshot of your screenshot has clearly explained the reason, PPPoE did not connect successfully! Click on that connection, try a few more times, if it doesn't work, you will have to call your **business**, for example, if you are wired, you will call the customer service of wired communication ** for them to deal with.

    Your so-called mobile phone shows that it is only connected to your own wireless router, which means that the wireless part of the wireless router itself is good. But that doesn't mean you can connect to the Internet, you also need your router to be able to connect to the Internet.

  14. Anonymous users2024-01-23

    Because that WLAN itself is not connected to the Internet.

  15. Anonymous users2024-01-22

    There are many reasons why the mobile phone can not access the Internet, first check whether the mobile phone card is in arrears, if not, check whether it is a problem with the mobile phone settings, eliminate the above problems or not, you can only take the mobile phone to the repair shop to check.

Related questions
9 answers2024-02-09

Not necessarily, or it could be, you set the NIC to automatically acquire the IP and start running. >>>More

7 answers2024-02-09

The above is completely invalid, the solution is to right-click on the online neighbor - properties - right-click on the local connection - select the attribute - drop down to select the Internet protocol - click on the property - choose to use the following IP address, you fill in the different numbers for the computer that shares this router 0 255), the mask does not need to be filled in by yourself, the default gateway is:. As for the DNS settings below, you can go online and check your local DNS and fill it in. Another way is to go into the router and select the running status - see the DNS server entry, which is your DNS, and fill in the DNS settings there. >>>More

7 answers2024-02-09

First of all, CMCC is China Mobile, you have to use the mobile phone number to apply, you can call ** or send a message to activate, tell him to open China Mobile wireless broadband service, after opening, there is no conflict with the traffic you are using now. iPod touch works. If you don't understand, contact me.

12 answers2024-02-09

1. Click Start Run , type cmd, and then click OK;

2. Type netsh winsock reset catalog and press enter. >>>More

10 answers2024-02-09

Fault Symptom:

service, this issue prevents standard users from logging in to the system. As an administrator user, you can review the system event log for more information about why this service is not responding. >>>More