What is the reason for too much backwater in the siphon toilet

The situation you said should be quite normal, because some toilets themselves are designed like this, when flushing, they use the rotation of water to form a siphon, and some toilets filled with water are like this, and it is not excluded that the design itself is like this. As long as it is best to form a siphon and expel the dirt, it is normal!

There is also the backwater you said is more than 5 cm away from the hole, which is normal, less than 5 cm is not standard, our national industry standard stipulates that the height of the toilet water cover cannot be less than 5 cm. In this way, it can prevent odors.

Although the national standard stipulates the size of the dead water cover, we can also adjust the height of the water cover, but it is not recommended to use it, because different toilet designs are different, if you change, it will affect the flushing effect.

The detailed operation is like this, you open the lid of the water tank, find the downpipe, there should be a soft plastic pipe on the pipe, this is to play the role of water seal, if you don't want a high water seal, you can unplug the water pipe and hang it in the water tank. Sometimes the stool sticks to the place where there is no water seal. It's troublesome.

The water-saving water tank, you can take a look, the downspouts are higher than the bottom of the water tank, and the water that is really flushed out is not as much as imagined, and the water sealed by the water is also partially siphoned back back. So don't worry.

Explanation of water-saving products:

In the case of using no more than 6L of water, the sewage is discharged out of the toilet and enters the sewage riser through the sewage horizontal pipe, if the flushing method of the product you buy is the vortex siphon toilet, then everything is normal, of course, you need to test the water consumption, if you buy a jet siphon toilet, to tell you an unfortunate news, the pipe of your toilet must be blocked, the way to distinguish the jet siphon and the vortex siphon is: there is a small hole opposite the inlet of the jet siphon toilet, and there is a hole next to the vortex siphon inlet.

Make the design problem, don't believe too much in the introduction, ask more friends which brands are used, everyone's experience is reliable!

Summary. Hello, glad to answer for you. Siphon toilets are prone to backwater.

Hello, glad to answer for you. Siphon toilets are prone to backwater.

Hello, glad to answer for you. The siphon toilet has its own anti-bend to stop the smell from the pipe; The straight rush didn't return to the pure water bend, so it couldn't stop the smell; The movement of the siphon is small, but because the pipe is thin, some toilet paper cannot be rushed straight in; The paper basket can be omitted if it is flushed, and the general rolling paper and the leftover tea leaves from the sleepy pants can be poured directly into the limbs to be washed away.

Well, on the second floor, if you want to prevent backlash caused by blocked main pipes, you should choose that kind of toilet.

Hello, glad to answer for you. Straight flush or squat.

Well, okay, thanks.

Siphon toilets are a common type of toilet that involves pouring a certain amount of water into the toilet bowl and then excreting the water and excrement together through the siphon effect. But if the toilet does not stop draining, it may cause us a lot of inconvenience, so what are the solutions to this situation?

First of all, we need to understand the reason why the siphon toilet does not stop coming out of the water. Generally speaking, the water coming out of a siphon toilet can be caused by a clogged toilet or a clogged drain. If the toilet is clogged, it may be due to a large amount of dirt that has accumulated in the toilet bowl, causing the water to flow smoothly.

At this point, you can try to use a toilet unclogger for unclogging, if the unclogging is ineffective, you may need a professional to deal with it.

If a drain pipe is clogged, it may be due to a large amount of dirt that has accumulated in the pipe, making the water not flow smoothly. At this point, you can try to use a drain unclogging device for unclogging treatment. If the pipe dredging is not effective, it may need to be dealt with by a professional agency.

In addition to blockage, siphon toilet water can not only be due to faulty internal toilet accessories, such as aging or broken rubber rings in the toilet. At this point, the faulty part needs to be replaced to restore the normal use of the toilet.

In short, if the siphon toilet does not stop coming out of the water, we need to investigate the cause of the problem in time and take corresponding solutions according to different reasons to ensure the normal use of the toilet. At the same time, in daily use, we should also pay attention to maintaining the hygiene of toilets and drains to avoid problems such as blockages.

1.How a siphon toilet works.

A siphon toilet is a type of toilet that uses the difference in water pressure to form a siphon effect during discharge. Its working principle is due to the bending and height difference of the drainage pipe, the water pressure difference is formed, so that the water in the toilet bowl is forced to be discharged downward, forming a siphon effect. However, if there is a blockage in the drain pipe, a situation of poor drainage may occur in the siphon toilet.

2.Causes of poor drainage of siphon toilets.

There are many reasons why the siphon toilet does not drain well, such as clogged pipes, bent pipes, lack of water in the tank, foreign objects in the toilet, etc. Among them, clogged pipes are one of the most common causes. When the pipe is blocked, the drainage route is blocked, resulting in the water in the toilet bowl not being able to drain smoothly, resulting in poor drainage.

3.How to avoid poor draining of a siphon toilet.

In order to avoid poor drainage of the siphon toilet, we can start from the following aspects.

First, keep the pipes clear by cleaning them regularly and using a pipe tool or cleaner regularly to remove dirt and foreign objects from the pipes.

Secondly, the laying of pipes needs to follow certain rules to avoid excessive bending and height differences, which can ensure that the water pressure difference is not too large, so as to avoid poor drainage of the siphon toilet.

Finally, pay attention to the hygiene habits of daily use of the bathroom, avoid throwing sanitary napkins, paper and other foreign objects into the toilet to prevent clogging of the drainage pipes.

4.How to deal with a siphon toilet with poor drainage.

If there is a situation where the siphon toilet drains poorly, we need to take measures to deal with it in time to avoid further impact on use.

The first step is to understand the blockage and find the location of the blockage by looking at the water level and the direction of water flow.

The second step is to adopt an appropriate cleaning method, which can be cleaned using a pipe tool, pipe cleaner, etc. If the situation is more serious, you can ask a professional to clean it.

Finally, it is more important to prevent the problem of poor drainage of the siphon toilet, and only by paying attention to the maintenance and use habits of sanitary pipes can this problem be avoided from the root of the imitation.

There may be several reasons why the toilet siphon effect is small:

1.The design of the toilet is unreasonable, such as blocked vents, insufficient bending of the toilet, etc., these factors will affect the siphon effect.

2.Unreasonable drain pipes, such as blocked drain pipes, excessive bending, etc., these factors will also affect the siphon effect of the toilet.

3.The water level is not high enough or the water pressure is not enough, which can lead to poor drainage or insufficient water inlet in the toilet, which in turn affects the siphon effect.

4.The service life of the toilet is relatively long, such as too much attachment on the surface of the inner wall of the toilet or aging of the valve, which will affect the siphon effect.

In order to make full use of the siphon effect of the toilet, we can pay attention to the following aspects:

1.Clean regularly to keep the vents open and drains clear.

2.Pay attention to the inlet water level and water pressure, and maintain the appropriate water level and water pressure to give full play to the siphon effect.

3.Replace wearing parts such as valves and seals in the toilet bowl regularly.

4.When choosing a toilet, you can choose a product with a large flow of water, low bending, and good stability to ensure a better siphon effect.

Non-stop water on the siphon toilet is a relatively common crack and check problem, if you want to fix this problem, you need the following steps:

1.Check the water tank: Open the water tank and check if there is water flow in the water tank, if the water flow keeps flowing, it means that there may be a problem with the accessories in the water tank and the accessories in the water tank need to be replaced. Shed nucleus.

2.Adjust the water level: If there is no water flow in the water tank, then you need to consider whether it is a water level, you need to manually adjust the water level, and observe whether there is still a problem of continuous water supply after adjustment.

3.Replace accessories: If the above two methods do not solve the problem, then it is time to replace the accessories, you can replace the siphon, sealing ring, toilet screws, etc. in the toilet.

4.Adjust the inclination: If the above methods do not solve the problem, it may be that the inclination of the toilet is too large, causing the water to not drain out of the toilet normally, and the toilet needs to be adjusted horizontally.

In short, if the siphon toilet does not stop flooding, it is necessary to carefully inspect all parts of the toilet to find the problem and repair it in time to ensure the normal use of the toilet. If you can't handle it yourself, it's best to have a professional repair it.