Which brand of engine oil is suitable for German cars?

German cars, do have high requirements for the quality of the oil, but I think if you have high requirements for the driving experience, then you still have to buy a better quality, like the German car personally think that the German brand oil will be more suitable, GT magic red oil is very good, is imported from Germany, and now the evaluation is very good, it is more appropriate to be called the German king by German car owners, GT oil power is significantly improved, and the oil change cycle is long and durable.

German cars have a high ** and picky engine, once the oil is not chosen carefully, well, "burning oil" will often accompany you, so German cars often need to use 0w w40 this viscosity oil, and the oil parameters should also pay attention to a very important index, that is, hths, the value of this index indicates the strength of the oil film in the environment of high temperature and high shear, this value is very important for German cars, and the value is generally required to exceed the above. HTHs are directly related to whether or not to burn engine oil. Because HTHS is used to describe the state of the oil at the friction between the piston ring and the inner wall of the cylinder under the friction pair, the oil is burned because the HTHS is low, of course, to exclude the situation of burning engine oil caused by problems such as valve oil seals, then you should choose the oil with higher HTHS.

German engines are mostly high-power, turbocharged, and at high rotation, the friction pair temperature is higher and the shear force is greater, so there are higher requirements for HTS. Generally, the engine oil certification of German car manufacturers, including Mercedes-Benz, BMW, Porsche, Volkswagen and other manufacturers, is based on the revision of ACE (European Automobile Manufacturers Association), and ACEA's requirements for lubricants are higher than those of API (American Petroleum Institute). When purchasing engine oil, you should choose the engine oil printed with AECA A3 B4 standard, or you can go to the official ** of this type of product to find the data of the oil, including HTHS, flash point, viscosity index, etc.

I recommend a formula imported from Germany, which has a formula to relieve burning engine oil, and the response is good, you can try it, hope.

Shell, Mobil, depending on what you need for your car, if it's not good, you can add it casually. The best one is the best.

I am currently changing to G T Magic Red, a Class IV PAO base oil, which is more high-end than other fully synthetic engine oils, and the power decay is slower, and it is no problem to change it for 15,000 kilometers. What's more satisfying is that the mute effect of the car after changing is good, and the car drives very well.

I myself change G T magic red engine oil, I Polo used four or five pots of power is very good, 10,000 kilometers are not attenuated, normal is 15,000 kilometers to change once, and at present, only offline modification shops and official channels are sold, it is very reassuring to use.

What is the best brand of engine oil for a car? It is best to use imported engine oil for automobiles, and the imported brands are very good, because the imported engine oil is of very good quality, and it is also very passable, so if you want to use a good brand, it is best to choose imported engine oil.

This should be everyone's choice may be different, some people choose American clothing, some people choose Shell, and some choose Castrol!

The original factory is the best, and the others are almost the same as long as they are regular brands, and it will be better to buy high-end ones with the same brand.

Automobile engine oil will generally be determined according to the model and application of the car, otherwise it will affect the engine life, and the engine oil is generally divided into synthetic oil and mineral oil.

There is no best, only the right one is the most important.

Of course, it is better to use imports, although my own Changan CS5 is not a good car, but I use imported G T magic red engine oil, which is PAO fully synthetic engine oil, which is much better than the other three types of engine oil, and the cleaning performance is better, which can effectively reduce the oil sludge and carbon deposits inside the engine, and the car is silent and the power is greater than before.

Engine oil can generally be divided into two categories: fully synthetic engine oil and semi-synthetic engine oil, these two types of engine oil have their own advantages and disadvantages, and you can choose freely according to your needs when purchasing engine oil brands. As for which brand is better, in fact, each brand has its own advantages.

The motor oils on the market can be divided into:

Fully Synthetic Oils: The base oil of synthetic oils is chemically synthesized; Mineral Oil: The base oil of mineral oil is extracted from **.

The difference between the two:

Synthetic oil has stronger resistance to high-temperature oxidation, viscosity change and wear. The viscosity of synthetic oils is less affected by air temperature, so they can flow smoothly at low temperatures and maintain proper viscosity at high temperatures, reducing engine wear.

In addition, the purity of synthetic oil refining is high, under the continuous high temperature operation of the engine, it is not easy to oxidize and decompose to produce oil sludge and carbon deposits, its deterioration rate is 50% slower than that of mineral oil, and the use of aging is also longer, the general use of mineral oil must change the oil for 5000 kilometers, and the synthetic engine oil, its oil change mileage can be extended to 8000-10000 kilometers.

The formula for the grade of engine oil: The formula for the oil grade is: SAE5W30 (SL), and the combination indicates:

SAE stands for American Society of Automotive Engineers; 5 indicates the fluidity of low temperature, the lower the number, the better the fluidity of low temperature; w is winter, 30 indicates the high temperature viscosity of the oil, the higher the number, the better the high temperature protection; SL, API (American Petroleum Institute Standard) level, S means gasoline engine oil; L, from A to L from low to high indicates the grade of the oil, the lower the letter, the higher the grade, the better the performance.

It is best to choose an acea-certified engine oil according to the A3B4 or C3 (C3 standard is compatible with A3B4) standard for German cars. To put it simply, it is to see if the words acea A3B4 or C3 are printed on the engine oil package. Boron is added to this standard oil formulation, which makes the oil viscosity higher than that of the same label in the U.S. version.

For this car, it is recommended to use 5w40 Castrol magnetic protection oil, the lubricity and low temperature fluidity of this oil are very good, so this oil can be used on German models.

The normal oil change maintenance cycle is 8000 kilometers or 9 months to change the oil, and the air filter is about 380-420. Specific**Subject to the actual charges in your local area.

Questions. Today's maintenance of 0w-40 with the Volkswagen Tanyue warranty.

This model is also possible, and there is no problem with using it.

0w 40.The model is higher than the level of the 5w 40 model, that is, it will be more expensive.

Questions. Changed the filter oil 580

Therefore, it is more expensive, but there is no problem with this oil.

Questions. Five liters.

Well, it's good to keep using this oil after changing it now.

Questions. It is not possible to change to another brand.

It is best to use the same brand of engine oil, and it is best to use it all the time.

Questions. Good.

Otherwise, if you change the composition of the engine oil itself, you may change the brand, the engine is louder or the fuel consumption becomes higher.

Of course, this is only possible, because there have been several fuel consumption problems due to oil changes.

Questions. Mobil fuel consumption was very high before, I don't know how the fuel consumption of this oil was.

Well, this one can be run for a while.

Most of the viscosity requirements of German cars are 5w-30 or 5w-40, (0w, 5w, 10w, 15w, 20w, 25w, the symbol w means winter, the smaller the number in front of w, the lower the low temperature viscosity, the better the low temperature fluidity, and the applicable minimum temperature is 20, 30,). What brand of engine oil is better for German cars? Most German cars require a viscosity of more than 30, and new cars can use 5w-30 oil with low viscosity, and 5w-40 oil is recommended for old cars.

What brand of engine oil is better for German cars? Using high-viscosity 5W-40 oil can increase some air tightness and reduce the fuel consumption problem of German cars. Some people say that German cars must comply with VW502 505 certification, Mercedes-Benz must obtain MB certification, BMW must obtain LL certification, and German car oil should best meet the ACEA standard (the European Automobile Manufacturers Association's verification and certification standards for lubricants, which are technically relatively high).

Even if using non-certified 5W30A1B1 or A5B5 oil.

Preferably VW502 505 certification or ACEA certification. Is it necessary not to use it without certification? I would like to ask how many people change the engine oil in the 4S shop and the oil change in the Subao shop?

Do you see that the oil you changed is in line with VW502 505 certification or ACEA certification? Personally, I think that the brand is not important, the important thing is that the label must be appropriate, and no matter how good the brand is, even if it is fake, it cannot play a good role. I hope to recommend oil *** to friends who drive German cars, and oil that meets various certifications.

After we test the method with a high pass rate, I hope mine can help you, and I also hope you can help me**, like, support me more, and follow me more. If you have any questions and requests, you can leave a message in the comment area, and I will reply one by one. Declaration:

Shell's oil is good and has very good durability to protect the engine. The more suitable for German cars is Mobil, this oil has a good long-term life.

Shell, Castrol, Mobil, Total, what I know is that these brands of engine oil are better, and there are engine oils that are more suitable for German cars in the South Oil brand.

Mobil, Total, Castrol, Shell, these brands of motor oils are very good. Shell engine oil is more suitable for German cars.

Great Wall, Fox, Total, Harvest, Longmobil engine oil is better, you can choose some German engine oil, with ACEC certification engine oil is very suitable. Great Wall, Flow, Total, Harvest, and Dragon Mobil are all very suitable for German cars.

Shell, Mobil, Castrol, Castrol, Sinopec, Kunlun, Total, JAMA, Fuchs, Kroneseder, Chevron G&F. 1. Total Total Total engine oil is the top car lubricant, which has the performance of strong protection and cleaning of the engine, and can prolong the life of the engine. In addition, it has outstanding performance in improving fuel economy, reducing carbon dioxide and pollution emissions, and protecting the catalytic converter of gasoline engines.

2. JAMA Lubricants adopts the most advanced low-carbon concept in the world, "magnetic fluorine" lubrication technology, original imported synthetic base oils and additives, and carries out appropriate blending and production in China, making it a low-carbon lubricant product that is more suitable for China's specific environment. Added oil can also achieve fuel economy and environmental protection during long driving hours, and can still provide excellent protection in any environment. 3. The advantages of FUCHS engine oil are fuel saving, smooth, good durability, low noise, and not easy to burn engine oil; The XTL technology allows the driver to benefit from a more convenient start-up process and less wear and tear, as well as a reduction in fuel consumption, which is significantly lower than that of lubricants of the same viscosity grade.

The disadvantage of FUCHS engine oil is that the viscosity of this oil is large, which is only suitable for German cars, and is not suitable for Japanese cars and Korean cars; In a low temperature environment, the cold start is poor. 4. Due to the development of environmental protection and machinery industry, kroneseder puts forward more requirements for lubricating oil: high oxidation stability, energy saving and environmental protection, better viscosity and temperature, good low-temperature fluidity, and excellent stability and wear resistance.

Energy saving, low emission, no pollution and long life have become the new goals of Keside lubricants. The base oil used has high viscosity index, good thermal oxidation stability, low volatility and long oil change cycle. Using nanoparticles as additives for lubricants, nanoparticles can be used to repair friction surfaces by filling in pits and damage on the surface of parts.

This reduces friction and wear. 5. Chevron Gold R&F Chevron R&F features additives that can inhibit corrosion, provide cleaning and dispersion, reduce the wear of piston rings at low and high temperatures, and prevent engine rust.

At this stage, the well-known brands of German engine oil include German GT engine oil, Liqui MOLY engine oil, SRS, and FUCHS. In the manuscript, both FUCHS and LIQUI MOLY engine oil have been squeezed into the world's top ten engine oil brand rankings. For German cars, there are better oils, only the right ones.

Even if the quality of the engine oil is very good, but the viscosity level of the selected engine oil does not match the car, but the gains outweigh the losses, and the application experience will be weak, so the most important thing in choosing engine oil is that we must choose the right engine oil, and well-known brands are not the most important.

First of all, German cars were able to choose engine oils made in Germany, such as Ford Motor Motors, Liqui MOLY engine oil, and GT engine oil. Let's take a look at these three engine oils.

FUCHS engine oil is characterized by fuel saving, silky, good durability, low noise, and not easy to burn engine oil; Thanks to the XTL technology, the driver benefits from a faster running process and less wear and tear and a reduction in gasoline and diesel consumption, which is significantly less expensive than a grease of the same viscosity class.

The disadvantage of FUCHS engine oil is that the viscosity of this engine oil is relatively large, which can only be used in German cars, and is not suitable for Japanese cars and Korean cars; Under ultra-low temperature conditions, the cold start is poor.

There are four series of German LIQUI new energy bus grease, which are skill series products, top technology series products, spell genetics, Thor 1 and him. And each series will continue to complete the subdivision, and the types are varied. The product advocates environmental protection, does not contain fluoride ingredients that are harmful to the body, can protect the ecological environment faster, and at the same time has a high efficiency guarantee effect, long-term maintenance of the regular operation of the system structure, and can be used in a variety of engines and diesel engines.

The German GT engine oil, the engine oil of the PAO secret recipe, has improved the limitations of the PAO engine oil, and its price is similar to that of fully synthetic engine oil, but its characteristics are better than that of fully synthetic engine oil.

German cars generally use a relatively large viscosity grade of engine oil, in addition to the local engine oil in Germany, you can also choose the well-known Shell engine oil, Castrol, Castrol and so on. It is necessary to choose the appropriate viscosity level according to the maintenance manual of the car, so that the effect of the engine oil can be fully exerted faster, so that the actual operation of the automobile engine is stronger.

Millions of car purchase subsidies.