After the computer is turned on, it is stuck, what should I do if I can t turn it on?

Updated on amusement 2024-02-25
8 answers
  1. Anonymous users2024-02-06

    1. Turn off the machine, and then turn it on and keep pressing F8 to select the correct configuration for the last time.

    Second, if you still can't, generally speaking, it is a hard disk problem, it may be a bad sector of the hard disk, you can make a USB flash drive boot tool, start the computer settings from the USB flash drive, enter PE, select the partition tool on the desktop (diskgeinus) to detect the bad sectors of the hard disk, if there are fewer bad sectors, you can use this software to repair, if there are many bad sectors, it is recommended to replace the hard disk. As shown in the figure below.

    3. If the hard disk is fine, it is a system problem, and the system can be solved by reinstalling the system.

  2. Anonymous users2024-02-05

    Hello landlord:

    First of all, please make sure that you are stuck in what place, it is a blue screen and there is English, it belongs to the computer self-test, it doesn't matter, it will automatically jump over after the self-test passes, if it is stuck in the boot bar or black screen, it may be that the system files are destroyed, just reinstall the system, o( o thank you.)

  3. Anonymous users2024-02-04

    You reinstall the system first, if it doesn't work, there is a problem with the computer hard drive.

  4. Anonymous users2024-02-03

    Stuck in **? Is it a self-test, or is it a system startup?

  5. Anonymous users2024-02-02

    You find a system disk and try it

  6. Anonymous users2024-02-01

    You can find those who have installed computer programs to help you check it, it should be a problem with the program, otherwise the computer's hard disk is not very good.

  7. Anonymous users2024-01-31

    1. Check the CPU and graphics card for heat dissipation, dust removal, oiling, or replace the fan.

    Second, the power supply voltage is unstable, the power supply is insufficient, and the power supply with high quality and high power is replaced.

    3. Clean up and defragment the disk.

    1. In the window of my computer, right-click the drive letter you want to clean up - "Properties" - "Clean Disk" - check the files you want to delete - OK - Yes.

    2. Clear the temporary files, start-run-enter.

    temp%-OK. 3. Clean up the registry and junk files with Optimizer or Super Bunny.

    4. Close some startup programs, start-run-msconfig---start, except for anti-virus software, input methods, general programs can be turned off.

    5. Delete unused program software.

    6. Defragment Disk - Start.

    7. Reduce the burden of memory, and do not open too many programs. If you have too many documents open or too many programs running at the same time, you will not have enough memory to run other programs, so you should close the programs and windows you don't use at any time.

    4. Upgrade the motherboard, graphics card, and network card drivers.

    5. Increase the physical memory, replace it with high-quality memory, and set up virtual memory reasonably.

    1. To play games, the virtual memory can be set larger, the minimum value is times of the physical memory, and the maximum value is 2-3 times of the physical memory.

    No matter how big it is, it takes up too much space on your hard drive.

    2. The virtual memory setting method is as follows:

    Right-click on My Computer--Properties--Advanced--Performance Settings--Advanced--Virtual Memory Change--Select the partition where the virtual memory (page file) is stored in the drive list--Custom size--Set the values in "Initial Size" and "Maximum", then click the "Settings" button, and finally click the "OK" button to exit.

    3. The partition where the virtual memory (page file) is stored must have enough space, and the hard disk resources are insufficient, resulting in insufficient virtual memory.

    There are details inside.

  8. Anonymous users2024-01-30

    It's a high temperature alarm! Stuck after crashing! I have to wait for the CPU temperature to cool down before I can turn on normally again!!

    Optimizer. Measure the temperature first, when measuring the temperature, you must open the game or the program you usually run, in order to measure the actual temperature, see which temperature has soared, open the case, clean up the CPU, graphics card fan, memory module and dust on the power supply, and then replace the CPU fan with a higher power.

Related questions
15 answers2024-02-25

There is an 80% chance that the CPU is hanging (the possibility of the board hanging at the same time cannot be ruled out). >>>More

14 answers2024-02-25

Analysis: This boot menu appears automatically, indicating that the system is corrupted and needs to be reinstalled. You have an optical drive, then the disc is installed, put the system disc into the optical drive, and then select the first line enter. >>>More

6 answers2024-02-25

You need to tell your comrades about your model so that you know how you press the button to enter the BIOS to set it up. >>>More

16 answers2024-02-25

1. The computer boot display does not light up the reason why the keyboard does not light up: 1. According to the situation, most of them are caused by poor contact of the memory or graphics card, open the chassis, re-insert the memory module, and clean the gold finger of the graphics card is the metal cable on the card, and it can generally be restored when booted. 2. The motherboard is unstable or dusty and will also cause a black screen, first unplug the data cable connected to the motherboard on the motherboard, turn on to see if it can pass the self-test, and completely eliminate the black screen phenomenon caused by the failure of the hard disk. >>>More

5 answers2024-02-25

Ringing at startup: Constant ringing (long sound): The memory module is not plugged in tightly or damaged. Reinsert the memory module, or replace the memory. >>>More