Telecom broadband is upgraded from 100 megabits to 500 megabits, how much can the wireless wifi spee

The upgrade of telecom broadband from 100 Gigabit to 500 Gigabit has nothing to do with the increase in your wireless WiFi speed.

Broadband provides the maximum connection speed, which is the limit.

Your wireless wifi speed is primarily determined by your router itself, not your broadband bandwidth.

Now 500M broadband, you should configure a gigabit router, theoretically the maximum ** speed is about 60mb s, but in reality it is also affected by signal strength, connection protocol and so on.

Your router AC1200, if you use a network cable connection, it depends on the bandwidth of your broadband, which will not affect the speed.

500 megabytes of theoretically ** speed, practical consideration of various attenuation of 50mb s is acceptable. A variety of factors must be considered, such as routers, network cables, network cards, wireless patterns, signal strength, etc.

If it reaches 30 ms or more, there is no problem.

TL-WDR5620 is a router, it has 2 versions: 100 Gigabit version and Gigabit version.

Because the versions are different, there are reasons why some people say that it is a gigabit version, and some people say that it is a gigabit version.

If you need Gigabit, you only need to choose the Gigabit version of TP-Link TL-WDR5620.

The maximum speed of the router gigabit port is 12MB, because the speed of wireless 300M and 5G 867M can easily exceed 15MB seconds. TPLink wireless routers rarely use MTK chips, while P-Link TL-WDR5620 routers use more commonly used MTK chips.

The ultimate speed is 72Mbps

5G, the ultimate speed is 433Mbps.

Therefore, a good router is the key to stability. The secondary router is very heavy, with a difference of several hundred dollars.

Wireless wifi speed.

It depends on how well your router supports it.

Then the wifi is also at this speed.

But unless you buy a gigabit 5G wifi router, if it can't support it, there are about 150 on the market, which is not bad for money, and you can go to the wifi6 level, hundreds or thousands.

There are two AC1200 routers, one is a WAN port of 100M, and the other is a thousand buys. The signal is wifi + 5g wifi.

If you have a 100M classic model, it is recommended to change to a 100M router.

Your router supports up to 100Mbps of broadband, and upgrading is useless.

Hello, Telecom 1000 megabyte broadband needs a minimum of 399 yuan. Telecom gigabit broadband has 5G convergence **399 and 599 yuan files, if you need to handle it, you can go directly to the telecom business hall to handle it.

China Telecom's 1000 megabyte broadband varies according to different regions, generally** is 199-399 a month, and the actual ** is stable between this.

It is usually divided into initial installation fee and monthly fee; The initial installation fee is about 200, which varies from place to place; Generally, it can be exempted by prepaying the tariff, choosing **, etc.; The monthly fee is related to the bandwidth of the rented broadband, such as 4M broadband, and the monthly rent is about 70 yuan. For specific tariff policies and preferential activities, you can call 10000 and ask local customer service.

China Telecom's "Jedi Strikes Back": 1000M broadband 40G traffic only costs 399 yuan!

With the gradual deepening of the implementation of "speed increase and fee reduction", faster broadband networks are moving towards ordinary users. From the second half of last year to this year, the three major operators have successively launched pilot access services for gigabit broadband, and recently they have been promoting gigabit broadband frequently. At present, most areas of China have achieved all-optical network coverage, from 20m to 50m, to 100m and even gigabit, because they are all networks built based on optical fibers.

As far as China Telecom is concerned, in order to compete with China Mobile and China Unicom, it has launched a 1000M broadband** in Shanghai.

Specifically, for China Telecom to launch this 1000M broadband in Shanghai**, it also includes a certain amount of domestic data traffic and domestic call time. In this regard, in the view of industry insiders, China Telecom hopes to achieve the common growth of 4G users and broadband users. As far as ** is concerned, the monthly basic cost is 399 yuan, for the 1000M telecom optical network broadband included in **, downlink 1000M, uplink 20M, monthly Han 1TB byte traffic (uplink and downlink total), effective in the current month, after exceeding the broadband rate will be Jiang Wei downlink 200M, uplink 20M, and the next month recovery.

500 megabytes is quite fast, of course, if you have high requirements for broadband, you still have to test it yourself to know, because the speed is also somewhat linked to your computer configuration.

In network terminology, Mbps is called "transmission rate", which is what we call "bandwidth". When we go to the telecom operator to open the network, the bandwidth is calculated according to this unit, for example, the transmission rate of 500 megabyte broadband can be expressed as 500 mbps.

Hello, Telecom's perfect 5G enjoy convergence ** is very cost-effective, it includes both traffic and broadband, a total of six levels are available, optional 129 gears, 169 gears, 199 gears, 299 gears, 399 gears, 599 gears. A main card can be superimposed with up to 2 supplementary cards, the basic content of the main card can be shared, domestic answering is free, and caller ID and 189 mailbox are given.

129 levels enjoy 300M broadband, including 30G domestic traffic and 500 minutes of domestic calls;

169 levels enjoy 500M broadband, including 40G domestic traffic and 800 minutes of domestic calls;

199 levels enjoy 1000M broadband, including 60G domestic traffic and 1000 minutes of domestic calls;

299 levels enjoy 1000M broadband, including 100G domestic traffic and 1500 minutes of domestic calls;

399 files enjoy 1000M broadband, including 150G domestic traffic and 2000 minutes of domestic calls;

599 files enjoy 1000M broadband, including 300G domestic traffic and 3000 minutes of domestic calls;

Based on the broadband tariff issued by the official business hall of China Telecom on January 6, 2020**. The minimum telecom broadband** is 30 yuan a month, and 360 yuan a year includes 20m broadband and TV.

China Telecom has added a boost to the general policy of reducing fees and speeding up the economy, and has launched the "on-demand broadband" service. The tariff is less than 1 yuan per day, and you can also speed up to 100m for free.

The network speed is optional, and the 20M broadband can be easily accelerated to 100M. After the on-demand broadband is activated, you can enjoy 100M high-speed bandwidth service for free in the first two months. From the 3rd month onwards, you can enjoy the service of speeding up to 100m free of charge 3 times a month.

If you have 500M broadband for Telecom, it will cost about 1,200 yuan a year, because this 500M broadband will cost about 1,200 yuan a year.

If the telecom 500 megabyte broadband is done, it will cost more than 1,800 yuan a year, which is a kind of integration, such as the cost of 500 megabyte broadband may be more than 1,800 yuan a year.

500M broadband,It's about 2000 yuan a year,Personally, I recommend that you handle telecom broadband**,Send phone bills,Send unlimited traffic,There is also network TV 500M broadband。 Pretty cost-effective.

At present, China Telecom's 500M broadband costs about a year. Between 100 and 150, its ** will fluctuate.

Generally, 200 trillion is enough for a family, about six or seven hundred a year, and 500 trillion is about 1,000.

Domestic traffic is 100g per month, domestic calls are 1500 minutes per month, domestic calls exceed the tariff for yuan minutes, domestic traffic exceeds the cost of 3 yuan g, and domestic short and multimedia messages are yuan.

It depends on the tariff you do, the tariff in different places is different, and the price is not the same. For details, please consult your local telecom customer service.

I hope mine can help you, hope, thank you.

Summary. The speed of your gigabit broadband is only 500m, there are three reasons, first of all, you have to use a computer**a large file, the actual **speed of 1000m broadband is about 100m-120m, if your **speed is also this speed then there is no problem, if the **speed is about 50m-60m, it may be that your router does not support gigabit network speed, it is recommended to replace the gigabit router in the test, the second reason is that your network is limited in speed, it is recommended to contact the official customer service to detect, The third is that your computer network card does not support Gigabit network, which may be the main reason.

Telecom has handled gigabit broadband, how to deal with the 500 megabit network speed?

The speed of your gigabit broadband is only 500m, there are three reasons, first of all, you have to use a computer**a large file, the actual **speed of 1000m broadband is about 100m-120m, if your **speed is also this speed then there is no problem, if the **speed is about 50m-60m, it may be that your router does not support gigabit network speed, it is recommended to replace the gigabit router in the test, the second reason is that your network is limited in speed, it is recommended to contact the official customer service to detect, The third is that your computer network card does not support Gigabit network, which may be the main reason.

Or 1, the network cable at home must be replaced with a Category 6 network cable or more than a Category 6 network cable. 2. Router, replace the router with a Gigabit WiFi6 router. If you use a mobile phone to test the speed, your phone also needs to support wifi6 to reach the maximum speed.

3. Optical modem is replaced with gigabit optical modem or 10 gigabit optical modem.