How to set up telecom wireless network, telecom broadband wifi setup

Hello! Hopefully, the following will be helpful to you.

1.To use the wifi of the wireless modem, you need to turn on the routing function of the device, this function is generally turned off by default, you can call customer service to set it on for you, or buy a wireless router to install and use.

2.Router Setup Method:

If you still have questions, please keep asking. Have a great day, thank you!

Hello: You're talking about wireless routers. You can follow the steps below to install it.

Enter the address you see on the router in your browser, which is usually.

1.Then enter, enter the corresponding account and password, generally the new ones are admin2After entering the operation interface, you will see a setup wizard on the left, click to enter.

3.Enter the setup wizard interface.

4.Click Next, enter the Internet access method settings, we can see that there are three Internet access options, if your home is dial-up, then use PPPOE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer.

The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP.

5.Go to the wireless settings and select whether the router is enabled for wireless status, which is enabled by default. The SSID is the login name used for authentication by the wireless LAN, and only the authenticated user can access the wireless network.

I hope I have been helpful to you, and if you have any questions, please feel free to continue to consult us.

Then put the wireless network card in the card tray, then plug it into the computer, install the Tianyi broadband connection program on the computer, open the program and click 3G connection to use.

I hope I have been helpful to you, and if you have any questions, please feel free to continue to consult us.

Computers, routers.

Then find the default and password written on the telecom router label, enter this information into the login page, and click OK.

After logging in to the telecom network settings, click Settings to enter the settings page.

After entering the success, select the network settings in the advanced settings, at this time some password settings will appear, you can set these questions according to your needs.

After the setting is successful, click Save, and then use your mobile phone to connect to the wireless network to test whether the setting is successful.

Be sure to look at the password on the back of the router!

1.After the telecom optical modem is installed, connect the network cable port to one of the network ports of the optical modem (for example, network port 1).

2.Connect the other end of the network cable to the network port of the computer, check the network connection status, and ensure that the network is successfully connected.

3.Use the default address to enter the Fibre modem settings page, which is generally the default address, and the user name and password can be found behind the device.

4.Set up wireless basic information:

After logging in, click on the "Network" column, and by default on the left side, check "Enable Wireless", "Wireless QoS", and "Wireless Multicast" before the basic WLAN configuration.

5.On this page, you can change the SSID of the wireless network, which is the name of the wireless network

6.Set a wireless network password:

7.In the navigation pane on the left, select WLAN Security Configuration

8.Encryption method: Mixed WPA2 WPA-PSK9Change the password: Change the wireless network link password in the WPA and shared key column10Click Save Apply.

11.After the setting is successful, you can connect with the network cable and connect to the Internet through the wireless network.

You need to purchase a wireless router to use the wireless network, and you need to set the corresponding parameters to use it normally after purchasing the router, and the specific settings are as follows:

1. The bus of the broadband network is connected to the WAN port of the router, and the LAN port of the router is connected to the computer.

2. After starting the device, open the browser and enter it in the address bar to enter the wireless router settings interface. (If you can't get in, please look at the nameplate at the bottom of the router or the router instruction manual, the default settings of different models of routers are different.) ）

3. An account and password to log in to the router appear in the settings interface, enter the default account and password admin, or refer to the manual;

4. After successful login, select the interface of the setup wizard, which will automatically pop up by default;

5. After selecting the setup wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and click Next directly;

9. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

4. Click on the wireless settings, turn on the wifi, and set the name and password.

5. Then click Advanced Settings, select Intranet Settings, and then save to complete.