How to achieve wireless Internet access between 2 wired network card computers and mobile phones at

You are using the router as a switch, and you need to connect the network cable that can access the Internet to the WAN port of the router (or the blue interface of the router).

Here's how to set up your router:

1. Line connection:

a.Connect the network cable from the cat to the router (WAN port), and then connect the network cable connected to the computer to the router (any port numbered 1, 2, 3, 4).

b.Connect the broadband cable to the router (WAN port), and then connect the network cable connected to the computer to the router (any port numbered 1 2 3 4).

2. Log in to the router interface.

In the browser, type: Enter, enter in the pop-up page: admin and click "OK".

3. Set up the router to surf the Internet.

Before setting up the Internet access, choose the correct Internet access method: Generally, there are three types as follows:

ADSL dial-up: Usually to access the Internet (when not connected to the router) need to click on the broadband connection, dial-up is successful before you can access the Internet, you should choose the Internet mode, Internet access and Internet password correctly enter the broadband and password, you can.

Automatically obtain an IP address: If you usually surf the Internet (when you are not connected to the router), you only need to set the local connection of the computer to automatically obtain the IP address to access the Internet, you should choose this Internet access method.

Static IP: If you need to fill in a fixed IP address in the local connection to access the Internet (when you are not connected to the router), you should choose the Internet access method, log in to the interface of the router, click "Advanced Settings" - "WAN Port Settings" to select the static IP mode "Static IP Mode", and enter your fixed IP address, subnet mask, gateway, DNS domain name server and other parameters correctly.

4. After setting, click "Advanced Settings" - "System Status" to check whether the connection status of the WAN port shows that it is connected, and whether the corresponding connection mode is displayed correctly.

The corresponding connection mode for ADSL dial-up is: PPPoE

The connection mode corresponding to the static IP address is the static IP address

**The following is how to set it up

Buying a router will solve the problem.

Two computers can be connected.

The one with the wireless network card has the broadband connection set to shared, and the other one can basically access the Internet, or change the IP to.

Now you want to use your wireless Internet computer as a host, and then, let your other computer also access the Internet, this first requires you wireless Internet computer settings, network sharing, and, your other computer can play online games, just can't open the web page, isn't it, if so, you can set up the DNS server of the computer connected with the network cable Try to point to the IP address of your wireless network card computer, it is best to set up the IP address and gateway of the computer for two days!

It is not possible to connect two computers directly, you must have a router or hub!

In this way, you can't go to the Internet at the same time, you have to have a router