-
Anonymous users2024-02-05Just buy an ordinary router It's the easiest Other methods have disadvantages After connecting, it's OK to set the IP address and your laptop is a wireless network card.
-
Anonymous users2024-02-04What version of the system are the two machines?
-
Anonymous users2024-02-03The actual landlord's situation has been connected, and the documents can be passed on with flying pigeons - there should be additional information on it.
It is estimated that the landlord is mainly unable to play the game on the LAN to think that he is not connected to the LAN, as long as it is a common route, there is no problem that the LAN is not connected.
Some games require the network firewall to be turned off in order to play against each other.
-
Anonymous users2024-02-02Yes, first of all, you need to make sure that the 2 computers are in the same LAN.
Just look at the IP addresses of the two computers when they are not in the same domain.
If not, you need to set it up in the router.
Guaranteed after the same domain.
Share a file if your online neighbor doesn't display properly on another computer.
You can try opening the explorer. Enter the IP address of another computer in the address bar. If the other 1 computer is.
Just enter (you can't omit the first 2 slashes).
As for playing online, you'll need to have two separate PCs.
Local Connection "-"Properties" -"Installation" -"Protocol" -"Microsoft" -"NWLINK IPX SPX NetBIOS....
Install this protocol here, so that you can play the game normally.
-
Anonymous users2024-02-01I don't have much to say either.
There are routes. There is a network card (wireless, wired too).
OK pull. Set up routes. ~
-
Anonymous users2024-01-31How do you set up a LAN between two computers?
The first step is to press the [Win] + [R] keys at the same time on any computer to open and run.
Step 2: In the [Run] dialog box, enter "cmd" in the [Open] dialog box, and click OK.
Step 3: In the DOS interface, enter "ipconfig" after [C: Users Administrator> and click enter.
Step 4, the IP address of the machine appears.
Step 5: [C: Users Administrator>] and then enter "ping."", the IP address of the other computer, and you're done.
The connection process is as follows:
-
Anonymous users2024-01-301. Use a network cable to connect two computers (if it is the same router, it is a LAN itself, and it can be used through simple settings). Click on the network icon at the bottom of the desktop and select Network Settings.
2. Select Ethernet (local connection), select Network and Tongqi Sharing Center.
3. Find the ethernet link on the left side, click it to open the status window, and click on the properties below.
4. Find and double-click the Internet co-cavity wheel chain version 4, open the properties window, select the IP address below, then set the IP address and subnet mask, and click OK. The same is true for the other computer.
This answer works with most computer models like the Dell G31545.
If you use a network cable to connect two computers directly, it is the following: >>>More
Hello! You first go to the cultural market to buy a GHOT automatic XP installation disk 5 yuan - 10 yuan, and then boot into the BIOS to set the optical drive priority start, boot up, press the keyboard up and down left and right keys to select "Manually run ghost" item, enter the ghost interface, select local--- select patition--- select from image, press the tab key to select the top big box, press enter, press the up and down keys to select the included extension. ghofile, select it and press enter. >>>More
Put more greenery next to the computer, then drink plenty of water and apply barrier cream.
You use the address bar of the web page to type in Settings!Steps: Connect the configured cable (C line) to computer A, set the IP and DNS of computer A to automatically surf the Internet, confirm that computer A can access the Internet, check the MAC of computer A, the method is the same as above, assume that computer A MAC (00-15-c5-66-0a-bf) In the second step, there are five interfaces on the router (five-port router), 1,2,3,4,WAN, five interfaces, 1 to 4 is the intranet interface, WAN is the external network interface, A computer is connected to the C line (wired network cable), dial it down, connect it to the computer with a network cable, and connect the other end to any interface of the router 1 to 4 (can not be connected to WAN) , and then set the IP of computer A to the same network segment as the router, the default IP of the router is, that is, the IP of computer A is set to, the gateway and DNS do not need to be set, if you set it in this way, enter it in the address bar on computer A, you can log in to the router settings page, note, these operations are on computer A, as for why, let's talk about it below. >>>More
I took it in the unit, connect the 3G wireless network card to the U port, you can use it, with software, the installation is also very simple, but others may access the Internet through you, because you can't disable your network card, otherwise the external and internal networks can not be on, you may also introduce the virus of the external network into your computer, and then spread to the entire local area network, and at the same time there is a danger of leaking secrets to the Internet, if your unit does not have this prevention requirement, you can use, I am in the power supply bureau, our electricity sales system is absolutely not connected to the external network, this can not afford to play, The dual network cards mentioned upstairs are not good, on the surface they are separated, but the virus will pass through your computer as a medium, although you have not built a bridge. >>>More