How to choose a children s desk, whether the desktop adjustment is good or not, say thank you 20 if

Updated on technology 2024-02-23
10 answers
  1. Anonymous users2024-02-06

    Children's desks must first be height-adjustable. There is no scientific reason for the fixed slope of 12 degrees and the adjustable slope of 7 degrees, they are all fooling people, and they are the sorrow of Chinese children. A healthy desktop must be able to adjust the tilt steplessly, adjust it at will, and be truly barrier-free!

    User-friendly design!

    Children's learning table desk, bevel function analysis is as follows:

    The first type of fixed inclined study table: there is a fixed inclined plane of 12° and a flat surface, which is low-functioning. The slope of the desktop is fixed, and it can only allow everyone to "adapt to its fixed and rigid inclined state", which lacks humanity and is obviously wrong.

    The structure of fixed inclined planes such as 12 degrees is a "compromise" method, and it is a helpless choice for many study desk manufacturers. What's more, "more than eighty percent of children don't use inclined planes and like to use planes", "no matter how good the function is", children don't use it, everything is equal to zero. In addition, there is a height difference of at least 12 centimeters between the two states when the bevel is adjusted to a plane, the desktop is much closer to the eyes, and the two arms are also raised by 12 centimeters, which is very harmful.

    This alternating use is more harmful, and children are more likely to get myopia, hunchback, etc.

    The second type of learning table with segment adjustment slope: segment type (or gear type, 4-12 segments, each section of approximation) to adjust the slope, the function of the mid-range. The 7-degree gear (binning adjustment) desktop is actually only ° four gears are useful, 22 degrees can only be used for reading, so there are only three ° for writing.

    In this way, there will inevitably be a situation where the child feels that 7 degrees is small and 15 degrees is too big when he writes, and there is also no selectivity, which is too difficult for the child. In fact, a fixed inclined plane is used, without any scientific basis. It is a helpless choice for manufacturers.

    The third type of stepless inclined learning table: stepless (any angle) adjustment of the inclined plane, and the desktop adjustment has only one support point (relatively high-end function).

    The fourth kind of stepless adjustment inclined plane sits on a good table: multi-faceted arbitrary adjustment, free stepless (arbitrary angle) adjustment of the inclined plane, desktop adjustment has two support points, good stability, and the desktop is equipped with advanced movable bookends that can be moved back and forth (high-end function). Its representative brand, Keai sits at a good table.

    Only the desktop with free and stepless adjustment is scientific and reasonable, and it is truly ergonomic design! Low**, high performance, we are really creating value! Buy only the right ones, don't buy the expensive ones!! Choosing the right main function is the last word!

    **] Copyright Notice: This article is an exclusive manuscript or exclusive disclosure of information by the inventor of Keai Sits at a Good Table, all rights reserved, if you need to repost or copy and publish in other ways, please be sure to indicate the author: The inventor of Keai Sits at a Good Table, otherwise you will be held legally responsible.

  2. Anonymous users2024-02-05

    Easy to use, the height of the table can be adjusted according to the height.

  3. Anonymous users2024-02-04

    When choosing a children's desk, pay attention to the following:

    1. The desk should meet the daily learning needs of children, and it should be suitable for writing, reading, drawing, and computer desks. To achieve the four requirements at the same time, it is best that the angle of the desk can be adjusted.

    Second, children's desks and chairs and children's furniture materials are relatively rich, including wood, wood-based panels, plastics, etc., these materials have their own characteristics, but they must be based on the premise of sturdy and practical. Specifically, it is required to be environmentally friendly and odorless, the surface coating should be non-fading and not easy to scratch, and be sure to choose a desk and chair that uses plastic veneer or other harmless paints, because children often have to touch.

    1. The children's desk[1] should be matched with the room. 0 7 years old is the peak of children's creative development, and it is best to use bold and bright colors. It is best not to use furniture that is too dark or old furniture that lacks color.

    Scientific studies have shown that children who are more introverted and weak should use furniture with strong color contrasts; For children with a more irritable personality, it is advisable to use furniture with soft lines and elegant colors. However, if you choose an adjustable children's desk and chair, it is best to choose a lighter color, because it is better to take a long-term view if you want to accompany your child for many years.

  4. Anonymous users2024-02-03

    Generally speaking, the specifications of the desks and chairs for primary school students are generally 63 cm high, and the chair should be selected to be 32 cm, which is more suitable for the proportion of the child's body, and for most primary school students, the chair of this height is more comfortable to sit on. When a child enters junior high school, the chair and table should be raised by 5 to 10 cm. Using ill-fitting tables and chairs, children are easily fatigued, reduce learning efficiency, and affect academic performance.

    If the chair is too low, you can only stretch your neck, and if the chair is too high, you have to bend over. Only when the body, table, and chair are properly matched can the child's waist board be straight. The back of the chair is also very important, many families are willing to choose a soft back when choosing a chair, so that it seems very comfortable to swing around on it, and they let their children sit on such a chair; Some families choose some chairs with straight backs for the sake of aesthetics, and the back design of these chairs is not suitable for studying.

    The back of the chair should preferably conform to the physiological curve of the child's spine, with a slight tilt at the upper end. A wobbly soft-backed chair increases the risk of damage to your child's lower back, while a straight back can make your child feel uncomfortable and lean forward. It is much better to coincide with the physiological curve, and when the child is looking at the computer screen or reading a book, as long as he leans on the back of the chair, he will definitely raise his head and chest.

    The armrests of the chair are also very important, the armrests of the chair must be fixed, and the bending of the arm is slightly greater than 90 degrees when supporting it, which can make the sitting posture more perfect. Chairs that are too slippery can also not be bought, some chairs made of plastic and painted finish look beautiful, but because they are too slippery and lack a minimum of stability, the child can sit on them in any position. The best materials are solid wood and cloth surfaces, on which the posture is relatively fixed.

  5. Anonymous users2024-02-02

    The use of desks is very frequent in life, which is not only a must-have for the office area, but also ensures the use of our work and life. But how do you choose a desk? After renovating the children's room, do you want to buy it immediately?

    As an important part of the children's room, the children's desk must be strict when choosing, and the material and safety factor must be considered thoroughly, so as to ensure that the child learns healthily, efficiently and happily.

    1. After decoration, choose the style and materials of the children's desk.

    When choosing a children's desk, you must match the design style and color of the children's room, consider the size, and avoid buying it back and not being able to use it. Simple and clean ivory white and so on are very good choices. At present, there are Pinus sylvestris sylvestris sylvestris on the market, with straight texture, moderate structure, light and soft material, good drying performance, and it is the best board.

    There is also particleboard, because the particleboard has a flat surface, it can be decorative; The static bending strength and internal bonding strength are high; Excellent processing performance; The warpage deformation is small, and the dimensional stability is good. Its disadvantages are that the expansion rate of water absorption thickness is large, the weight of the product is large, and the nail holding force is low, so it is not suitable for multiple disassembly and assembly. MDF is a good material for making furniture due to its impact-resistant texture and easy reprocessing.

    2.After the decoration, pay attention to the use of the desk.

    There are many styles of study desks on the market today: foldable, beveled, horizontal, adjustable height, and extended tabletop. All the designs are for the convenience of children, but the premise is whether its design is safe, whether the foldable will clip the child's hand, and whether there will be potential safety hazards in the corner of the table before and after folding (the child accidentally bumps into it), so choose a table with a rounded corner design.

    It is necessary to focus on understanding whether the size of the learning table is appropriate (mainly the length and width of the table), whether it can meet the needs of children when they grow up, and whether the height can be adjusted.

    3.The most important thing to choose is to buy a children's desk.

    Today's children's desks require correct sitting posture and prevent myopia. All current study desks have a toggle board design. In addition, to see whether the desk meets the daily learning needs of children, the height of the desk can be adjusted synchronously with the growth of the child's height, that is, to grow with the child.

    The desk is designed with security in mind. Children are active by nature, and safe design is indispensable. The standard height of a 6-year-old child is 110-2875px, and the appropriate desk height for him is 460mm; The standard height of a 10-year-old child is 530mm. Depending on the age of the child, the size and size of the desk should also be noted.

    Remind you that your child's continuous growth requires us parents to constantly pay attention to and adjust. Ensure that children can be used normally during their growth and help children grow up healthily.

  6. Anonymous users2024-02-01

    The design of children's desks needs to be suitable for children's eyes, and the height and length of the desks should be suitable for children's use, and children of different ages use different desk sizes. It should be noted that the material of the desk must be environmentally friendly and must be suitable for the use of students.

  7. Anonymous users2024-01-31

    The children's desk can be installed with green plants at a certain angle, or an hourglass can be placed on the children's desk, and the table lamp can be placed according to the light and overall decoration of the room; When placing the table lamp, it is necessary to choose different colors and angles according to the environment to protect the children's eyes.

  8. Anonymous users2024-01-30

    First of all, it is necessary to meet the height of the child, and the table top can be replaced by some inclined planes to make the child more relaxed; It should be noted that the size of the desktop should be in line with the child's use, and secondly, the height of the desktop must be in line with the child's president structure.

  9. Anonymous users2024-01-29

    The desk should be adjustable in height; Pay attention to whether the material of the desk has formaldehyde, formaldehyde can harm the health of children. Whether there is a storage space for books on the top of the table, and whether there is a storage box for stationery under the desk. Is there an easel that can be tilted.

  10. Anonymous users2024-01-28

    Families with children in the learning stage need to be equipped with a suitable set of learning desks and chairs. As children's furniture, children's desks need to be paid special attention when choosing, so let's learn about the height of children's desks and the precautions for choosing children's desks.

    1. The height of the children's desk.

    In general, the appropriate height of the desk for children of different heights is also different

    The standard height of a 6-year-old child is 110-115cm, and the height of his corresponding desk is 460mm;

    The standard height of a 10-year-old child is 530mm for his desk height.

    The standard height of a 12-year-old child is 550mm.

    The standard height for a 14-year-old child is 630mm.

    2. Precautions for the selection of children's desks.

    At present, the wood used to make study tables is mainly pine sylvestris, particleboard, MDF, etc. Pinus sylvestris sylvestris var. In addition, there is particleboard, with smooth surface, strong decoration, high static bending strength and internal bonding strength, excellent processing performance, small warping deformation, good dimensional stability, cheap, but the expansion rate is large after water absorption, and it is suitable for multiple disassembly and assembly without lifting tung.

    MDF is impact-resistant, easy to reprocess, and is a good material for making furniture. Specifically, what kind of wood to choose can be selected according to the actual situation, and it is recommended to choose solid wood material.

    The size of the learning table is an issue that is easy to ignore when choosing, whether the length, width and height of the table can meet the needs of children, and whether the height can be adjusted, so that different ages can also use it normally. Now there are many multi-functional learning desks, such as foldable, beveled, horizontal, adjustable height, extended desktop, etc., do not only look at the function and ignore the safety when purchasing, such as whether the foldable will be clamped in the hand, whether there will be potential safety hazards in the corner of the table before and after folding. The learning table and chair should conform to the ergonomics of the child's growth, and at the same time adjust the child's sitting posture, it can also protect the healthy development of the child's bones and vision.

    The height recommendation for children's desks is as above, and children of different heights should choose desks of the appropriate height. There are also precautions for the selection of these children's desks, the material, size and function are all places that need to be paid attention to, and you should consider more when purchasing.

Related questions
17 answers2024-02-23

All solid wood is safe and environmentally friendly for consumers.

8 answers2024-02-23

The specifications of the power supply are usually 300W (rated power) 400W (maximum power), which means that the power supply does not usually use the maximum power. >>>More

5 answers2024-02-23

How to understand children's science and literature is the unity of science and literature is as follows: >>>More

7 answers2024-02-23

1.The relationship between the chosen major and interests. When choosing a major, you should consider whether you are interested or not, but you can't just rely on interest, because the major you studied in college has a certain relationship with the future job. >>>More

10 answers2024-02-23

Changing the nautical style can solve this problem. If you want to change the modern style, you need an XPLORE Manager (referred to as X Manager), use X Manager to open C: System App Hdesktop 0x2001e8b2 Theme Pkg, then you will see one of them, this is the modern style settings file, copy it, put it into a manageable folder as you like, and then suffix it. >>>More