What should I do if my iPhone can t connect to the activation server?

You can do it as follows:

1. Insert the mobile phone card into the iPhone.

2. Press the power button on the right side to power on.

3. After turning on the phone, it will enter the welcome interface of the activated phone, and at this time, it will start by sliding to unlock.

4. Then you will enter the language selection interface, of course, select China, and then let us select the keyboard, and then click "Next" after that.

5. Since during the activation process, the mobile phone needs to connect to the network to communicate with the Apple server, and it can only be activated after confirmation, so the network needs to be used. Of course, if the current mobile phone has a 3G or 4G network, you don't need to choose a wireless network, please click "Next" later.

6. This is followed by the selection of some mobile phone accessibility functions, such as the "Location Services" function in the figure below, and the general recommendation is to choose to start it.

<>8. Similarly, you can create a password or not.

9. Then down are settings such as iCloud, Touch ID, etc., which are all optional.

10. When everything is set up, you will see the welcome interface in Chinese, and the activation is complete.

The iPhone can be activated by the following methods:

1. Follow the steps below.

1. View the list on the System Status page. If the box next to "iOS Device Activation" isn't green, try activating your iPhone later.

2. If you're prompted to enter your passcode when you activate your iPhone, do so. (If you see a passcode prompt, Activation Lock might be enabled in Find My iPhone.) ）

3. Restart your iPhone.

4. If you're using a cellular data connection, try connecting to a reliable Wi-Fi network instead.

2. If it still can't be activated, you can activate your iPhone through iTunes instead

1. Check whether the computer is connected to the Internet.

2. Open iTunes on your computer. Connect your iPhone to your computer using the cable that came with your iPhone.

3. Wait for iTunes to detect and activate your iPhone

4. If iTunes shows "Set as New" or "Restore from Backup", it means that iTunes has activated your iPhone.

The correct activation method is as follows:1. First of all, press and hold the power button with your thumb to turn on the power, as shown in the figure below

2. Select the language and select Chinese Simplified, as shown in the figure below

3. Select the country and region, as shown in the figure below

4. Quick start to select manual settings, as shown in the following figure:

5. Click Continue on the Messages & Calls page, as shown in the figure below

<>7. Wait for the boot activation to be completed, as shown in the figure below

Try again after inserting the SIM card. If the ** card is not inserted when activating the iPhone, the phone will not be activated. The phone will automatically detect whether the ** card is currently inserted, and if not, it will prompt the insertion of the ** card.

So before activating, please prepare a ** card that you can use on your iPhone.

You need to pay attention to it when activating.

1. Make sure that the phone has a certain amount of power, because it takes a while to activate the phone, so make sure that the phone has more than 20% power.

2. To install a SIM card, you must insert the SIM into your phone before activation. To install the SIM card, use the card pins provided in the box to remove the card slot to install the SIM card.

The correct activation method is as follows:1. First of all, press and hold the power button with your thumb to turn on the power, as shown in the figure below

2. Select the language and select Chinese Simplified, as shown in the figure below

3. Select the country and region, as shown in the figure below

4. Quick start to select manual settings, as shown in the following figure:

5. Click Continue on the Messages & Calls page, as shown in the figure below

<>7. Wait for the boot activation to be completed, as shown in the figure below

Check the network because the activation requires a mobile phone to connect to the network and access Apple's activation service through the network, so if there is a problem with the network we are currently using, it will also lead to the situation that it cannot be activated.

Use the charging cable to connect to the computer, and then you will hear the prompt sound that the computer has been successfully connected, now please turn off the iPhone first, and then you will hear the prompt sound that the computer is not connected successfully, please press and hold the power on button and the home button at the same time, and continue to hold the home button at the same time, for the 10th second, please release the switch button immediately, and continue to hold the home button.

At this time, iTunes will automatically start up and prompt you to go to recovery mode (iPhone will keep a black screen all the time). Then you can hold down the shift key on your keyboard, click on Restore, and select the corresponding firmware to recover.

Apple Update Activation Server, so if there is a problem with Apple's update activation service, it will not be activated when we need to activate it just after brushing the machine. Because every time we flash the phone, the system will connect to the network and obtain authentication on the Apple activation server. If there is a problem with Apple's activation service at this time, such as a temporary interruption, etc., our device will not be activated normally.

After updating the settings, we will enter the interface as shown in the figure below, we will select Set as a new iPhone, and then click on the following to continue to enter the next step After the phone is activated, we can disconnect it from the computer, and then we can boot it in.

Activate the server. Please try connecting your iPhone to iTunes to activate it, or try again in a few minutes.

Although the wifi shows that there is a signal, sometimes there is no network, check your router, or other devices to see if there is a network.

I've moved the hardware, replaced the hard disk, and expanded the capacity, right?

Unable to activate Your iPhone cannot connect to the activation server, which is caused by a malfunction of the mobile network of the iPhone, you can reset the mobile network of the mobile phone to solve the problem.

1. Take iphone7 as an example, light up the phone screen, find the [Settings] option, and click to enter the next step.

2. On the [Settings] interface, find the [General] option and click to enter the next step.

3. In the [General] interface, find the [Restore] option and click to open it.

4. On the [Restore] interface, select the [Reset Network Settings] option, and click to enter the next step.

5. Manually enter the numeric password to authorize [Reset Network Settings] to complete the restoration of network settings.

This may be due to the fact that the network signal used by the user is not selling Huijia, and you can try to change the reliable connection to a reliable Wi-Fi network as follows:

<>4. After clicking and entering the password, click "Join" in the upper right corner.

5. This will connect to the wifi and then reactivate the server.

PrecautionsIf the issue is not resolved, call Apple Support Assistance or schedule a test at 400-666-8800, or select Self-Help Assistance to contact Apple Support at an Apple Store or Apple Authorized Service Provider.

Your iPhone cannot be activated because the activation server cannot be reached.

This usually means that your iPhone is experiencing some issues during the activation process, which could be due to network connection issues or Apple activation server failure, etc. Here are some possible solutions:1

Check the network connection: Make sure your iPhone is connected to an available Wi-Fi or cellular network and that the network connection is stable. You can try switching to a Wi-Fi network in another state, or try using a cellular network.

2.Restart your iPhone: Sometimes, restarting your iPhone can clear up potential glitches and can fix activation issues.

Press and hold the power button on your iPhone until the "Slide to Power Off" option appears on the screen. After the collapse slide is turned off, wait for 1-2 minutes and then press the power button to turn it on. 3.

Update iOS: If your iPhone is using an older version of iOS, then there may be a problem activating it. You can try upgrading to the latest iOS version.

Go to Settings > General > Software Update to check if you can update to the latest version. 4.Try iTunes Activation:

Connect your iPhone to your computer and launch iTunes. Select your iPhone in iTunes and try to activate it. If it still can't be activated, you can choose to restore it.

If you've tried all of the above solutions and still can't activate your iPhone, you can consider contacting Apple customer service for further support and debugging.