How to set up TD network for Iphone4s

It's not that the phone doesn't support it! The mobile phone of the mobile business hall is supported! TD network is regional, only in Shenzhen, Shanghai and other cities! You just go to the mobile business hall and do the coverage.

iPhone4S does not support TD network, no matter how you set it, it is useless.

Apple 4S does not support 4G network, so you can't set up a 4G network.

Because when Apple's 4S came out, there was no 4G network at that time, so as a mobile phone designed and produced at that time, the hardware did not support 4G network.

Apple mobile phone set up 4G network:

1. Open [Settings];

2. Find [Cellular Mobile Network];

3. Find [Cellular Data Options];

4. Find [Voice & Data] to set 4G;

The Apple 4S has always been able to use the corresponding carrier's 4G SIM card. It's just not possible to use the 4G network. The iPhone 4S uses a Micro-SIM card.

SIM card installation method: Click the small hole on the right card tray of the iPhone with a needle and take out the card tray. Place the card into the tray by shape.

Replace the card tray to complete the installation.

4G does not mean that the mobile phone settings can be solved, it is related to the mobile phone card itself, you have to go to the official business hall to upgrade, and then open the mobile phone settings to open the traffic

The mobile phone will first automatically match the corresponding network operator to see whether it is mobile or Unicom, and then you can sit in the right seat.

CMWAP and CMNET.

First of all, please call 10086 and ask if your GPRS includes both CMNET and CMWAP

The second is the MMS setting box, fill in the following data: APN is CMWAP, MMSC is CMS, MMS ** is Yes, you can use it after restarting.

1. Apple 4S can be connected to the Internet through wireless LAN or cellular network (through mobile, Unicom and other operators).

To turn Cellular Data on or off, you need: Go to Settings > General > Network, then turn Cellular Data on or off.

2. CMWAP and CMnet need to be set up in the cellular data network, first of all, please confirm the traffic package with the operator, and ask whether the traffic ** includes both CMNET and CMWAP. If so, enter the uppercase cmnet in the APN field and restart it.

3. Fill in APN: 3GNet or 3GWAP or UNINET in the cellular data network dialog box, but you can only log in after the WAP is cracked. If you are cracking the WAP, go to the iPhone 4 settings in General - Network - Cellular Data Network:

APN fill in 3GWAP and leave both username and password blank.

The China Unicom and China Telecom versions can only support China Unicom 3G

WCDMA or Telecom 3G

CDMA2000, mobile 3D is not supported

td-scdma

iPhone4S does not support mobile 3G network, normal mobile Internet settings:

1.Set up. 2.General (General).

3.network access points).

5.Just enter cmnet on the first line.

Are you not set up your network settings properly?

You turn on your phone and go to Settings - General - Network - Cellular Data Network;

If you want to use a mobile SIM card, fill in the following data:

APN: CMNet or CMWAP

Then the following do not need to be filled in)

Below is the MMS settings.

APN: cmwap, mmsc:, MMS**:, MMS size: 50000

Then restart the machine and it should be fine!!

1. Select "Settings" to enter the settings interface.

2. Enable "Cellular Data".

Apple 4S can't use 4G network, this is a hardware problem of the mobile phone, there is no TD-LTE, FDD-LTE module, etc., so it does not support 4G network.

Basic introduction: iPhone 4S is a touchscreen smartphone launched by Apple, the fifth generation of iPhone. It was held on October 4, 2011 Beijing time in California, USA'At the new product launch conference of S Talk iPhone, this new generation of iPhone running iOS 5 system was announced.

The iPhone 4S has been greatly improved in terms of hardware and software, and its biggest highlight is the new Siri intelligent voice assistant and iCloud cloud service. In terms of hardware, it is equipped with an Apple A5 dual-core processor, and the front is equipped with an inch IPS glass hard screen with a resolution of 960 640 pixels, and the pixels of the back-illuminated lens have been increased to 8 million.

You need to go to the mobile office to replace your card and install the mobile company's plug-in.

Friend, you should change **, at least 5c or 5s

iPhone4S does not support mobile 3G network, normal mobile Internet settings:

1.Set up. 2.General (General).

3.Internet. access point).

5.Just enter cmnet on the first line.

First of all, the iPhone 4S cannot use China Mobile 3G to access the Internet.

China Mobile's 3G is relatively special, it is TD-SCDMA with domestic independent intellectual property rights, and it is very few countries in the world that have adopted it. So in order to use China Mobile 3G, Apple needs to add additional hardware modules. Moreover, when 4S was released, the 3G technology that was more widely used in the world was WCDMA, which is China Unicom's 3G.

So at that time, 4S used the WCDMA module. Therefore, 4S can use Unicom 3G, but cannot use mobile 3G. Later, perhaps due to the cost reduction, TD-SCDMA and WCDMA universal 3G have been realized in 5S and 5C Plus.

Love Crazy is divided into Unicom version and telecom version.

Only China Unicom 3G WCDMA or China Telecom 3G CDMA2000 can be supported, and mobile 3D TD-SCDMA is not supported

I'm sorry to tell you that 4S supports 2G so .

4S does not support mobile 3G TD-SCDMA, only 2G network can be used!

iphone

The 4S unit does not support mobile 3G mode, and cannot be connected to the mobile 3G network with a mobile card, but can only access mobile 2G.

At present, Apple supports mobile 3G and mobile 4G models, only 5C and 5S.

Never think that Apple supports TD-SCDMA, and it doesn't make sense to change the signal icon.

If you only need to destroy this effect, you can achieve it by following the following steps:

3. Modify it in the software, enter "T" chain or "H".

But if you want to really use TD business, sorry, no. It can only be GPRS with 2G.

If you are full of intentions, please adopt it.

Apple does not support mobile 3G networks, and mobile users can only use 2G networks.

If you want the mobile phone signal to display H or T, it must be parallel before the hand to support mobile G3, but the iPhone only supports Unicom G3 or Telecom regret Sun G3, so there is no way, and one day mobile will also have iPhone mobile file traces 3G custom machine Maybe it will be good!