How to turn on iPhone 4S MMS

1 MMS: Settings - General - Network - Cellular Data Network If there is no setting option, please use a needle to take out your China Mobile or Unicom card, wait for 20 seconds and then put it back. Wait until the signal pops up, then you go into the settings and see that there is already an option to set cellular data!

yes, it's done. 2 FaceTime: Settings—**.

You will see the FaceTime option, which is waiting for activation. Pull to the bottom of the SIM app, click on it, tap on any item and exit, and then turn on the FaceTime switch. After a short while, you will be prompted that FaceTime has been activated and "Your ** number will be shared with the contacts with whom you made the FaceTime call".

In the setting box of Settings - General - Network - Cellular Data Network - MMS, fill in the following data: APN is CMWAP, MMSC is .

MMS**, which can be used after restarting.

Set up cellular data --- --- Universal --- network: APN: CMNet MMS.

MMS**: MMS size: 50000

Taking the iphone8 mobile phone as an example, there are the following steps to turn on "MMS":

1. Open "Settings" on the desktop of the mobile phone, as shown in the figure below.

2. After opening "Settings", find the "Information" column and click to enter, as shown in the figure below.

3. Finally, click the button on the right side of "Send and receive MMS" in the "Message" page to turn on the function, as shown in the figure below.

Here's how to open an MMS message:Tools Raw trembling pants: ipone11, local settings.

<>6. According to your own needs, select several options to turn on MMS, and the setting is successful.

Taking the iphone8 mobile phone as an example, there are the following steps to turn on "MMS":

1. Open "Settings" on the desktop of the mobile phone, as shown in the figure below.

2. After opening "Settings", find the "Information" column and click to enter, as shown in the figure below.

3. Finally, click the button on the right side of "Send and receive MMS" in the "Message" page to turn on the function, as shown in the figure below.

！！Log in to Monternet, and then click "Album" in the menu above, and then enter the "MMS Album"; Then click on "MMS" in the menu at the top.

At this time, you should have logged in to "Monternet Mobile - MMS Channel", and then you can see a "MMS User Service System" in the upper left corner

Enter your mobile phone number to log in. Then enter your mobile number and service password to log in. (If you are not registered, please register).

After logging in, select "Subscription Information", and select "Default MMS Terminal" as the terminal type. Then select "Copy to e-mail" here on the receiver side; Then enter your email address in the receiving address OK, and finally select submit, and you can check whether your registration information is correct after logging in again!! It is recommended that you try not to change the other options).

Remember to set up your own email in the email on your iPhone, I used Gmail, and the effect was good!!

Once you're done, you'll be able to use your mailbox to receive MMS!!

Select "Settings" to enter the settings interface.

After entering the settings interface, select "General".

In the general menu, select "Network".

Enable "Cellular Data" in the network menu.

Here's how to check MMS:

1.After you open the GPRS network, click on the MMS message to check the MMS content;

2.If you can't receive MMS messages, you can go to the MMS mailbox to check.

For specific business details, please consult the local Unicom business office or local manual customer service.

First, make sure to turn on cellular data, without cellular data you can't send and receive. Secondly, click on the cellular data network, and fill in the contents as follows:

apn:cmnet

Username: Password: APN: CMWAP

Username: Password MMS**:

Maximum message capacity for MMS: 102400

My iphone is the version, but it's not the latest version, it's jailbroken, and you can send and receive MMS messages after doing the above operation. Hope it can help you, if you still have questions, you can ask! I hope to adopt!! Thank you.

Cellular data must be turned on to receive and send MMS messages.

(1) Find the Internet switch position: enter the "Settings" - "General" - "Network" menu.

2) Turn on the "Cellular Data" switch: (Operation method: click the switch icon and slide to the ON state), otherwise you will not be able to access the Internet or send and receive MMS messages after the setting is successful.

3) How to set up Internet and MMS: Go to "Cellular Data Network" and enter the parameters of Internet and MMS.

Parameter content. Internet access parameters (above):

apn: cmnet

Customer Name: Empty.

Password: Empty. MMS parameters (below):

apn: cmwap

Customer Name: Empty.

Password: Empty. MMS**::80

Maximum MMS message size: 102400

mmsc ua prof url: null.

Settings > General > Network > Cellular Data Network.

Format: APN:cmnet

Username: Password: APN: CMWAP

Username: Password MMS**:

Maximum message capacity for MMS: 50,000

How to set up MMS on iPhone:

1. Select "Settings" to enter the settings interface.

2. Enter the settings interface and select "General".

3. Select "Network" in the general menu

4. Enable "Cellular Data" in the network menu

5. Find the MMS item and fill in all the MMS data. Note here, ** inside". "Don't write a full stop.

6. To the sixth step, the MMS setting should be completed.

Settings - General - Network - Cellular Data Network - APN (CMWAP) - MMSC (MMS** (MMS maximum message capacity (307200) - Restart the phone - Settings - SMS - Turn on the MMS switch.

Did you follow the steps above?

Settings --General --Networks --Cellular Data Network.

apn fill cmnet

Username and password are empty.

MMS APN: CMWAP

Username and password are empty.

MMSC: MMS**:

Maximum MMS message size: 102400