Why does the S scanner turn off automatically when it s turned on? Some people say it runs under CMD

Should be running under cmd. You need to use the cd command under cmd to enter the directory where your s scanner is located, and then enter it should be fine, the latter will copy it to the root directory of the c drive, and then enter cmd, and enter cd enter in turn.

This needs to be executed from the command line.

Open cmd, switch to the specified path, and follow the instructions.

Sweep the port? I have another one that also sweeps the port! Guess your bat** isn't right!

There are many reasons why the application degree is automatically turned off, and the most common ones are the following:

1. Hardware problems, main memory module problems, poor quality memory modules often appear memory overflow, resulting in the automatic exit of the running software or fault prompts;

Solution: Replace the memory module.

2. System poisoning: it may be that there is a malicious program or Trojan horse in the computer;

Solution: Use anti-virus software to kill or reinstall the system;

3. Software damage: This situation generally occurs in the operation of a single software;

Here's how to do it: Delete the software and reinstall it.

2. Click on the command prompt;

3. Enter runas user:administrator cmd in the command prompt;

4. Enter the password to enter the administrator's cmd permission;

5. But here you need to know the password of the administrator. And here you don't need the administrator user, you can use other users in the same management group to start cmd, the authority is also administrator, for example, there is a user in administrators called: abc then you can use the command:

runas /user:abc cmd。In this case, you only need to enter the login password of the ABC user.

1. Run cmd with administrator privileges

1. Take win7 as an example, click to start - enter cmd in the run box, select cmd, and right-click to select run as administrator.

2. Take win8 as an example, press win+x key combination - select Command Prompt (Administrator).

2. If you want to elevate the administrator privilege under the command command, the method is as follows:

1. Take win7 as an example, click to start - enter cmd in the run box, select cmd, and right-click to select run as administrator.

2. Enter netlocalgroup administrators hacker add and press enter.

Note: Add a hacker to the System Administrators group, i.e., elevate the permissions of the hacker and make him an administrator.

Method 1: Right-click on the command line.

This method is relatively common, click on it to find cmd, right-click the mouse "run as administrator (a)" so that the call is the administrator's permission;

Method 2: Shortcut mode.

After clicking on win+r, select "Run as administrator", and then confirm; Yes, this will still bring up the UIC prompt interface, select "Yes";

Method 3: Keyboard-only mode.

Click on the start, enter cmd in the input box at the beginning, at this time the shortcut to cmd appears, you can use the method of method 1 to enable the administrator call, but here we don't use the mouse, directly press and hold the three keys of ctrl+shift+enter to directly call the cmd of the administrator permission;

Win8 user win + q enter cmd and then ctrl + shift + enter

Method 4: Command mode.

We can go directly to cmd in non-admin mode and type:

runas /user:administrator cmd

But here you need to know the administrator's password. And here you don't need the administrator user, you can use other users in the same management group to start cmd, the authority is also administrator, for example, there is a user in administrators called: abc then you can use the command:

runas /user:abc cmd。In this case, you only need to enter the login password of the ABC user.

1. Find Windows System32, right-click, "Run as administrator".

2. Create a shortcut from Windows System32 to the desktop, and then you can directly right-click on the shortcut icon and "run as administrator".

3. Start--Run, enter cmd, right-click on the menu that appears above, and run in "Command Prompt".

To run cmd as an administrator, you need to enter a command prompt.

The specific steps are as follows:

1.First, open the Start menu, find the WinDos system folder, and open the folder.

Method 1: Right-click on the command line.

Click on it to find cmd, right-click the mouse "run as administrator (a)" to call it is the administrator's permission;

Method 2: Command mode.

We can go directly to cmd in non-admin mode and type:

runas /user:administrator cmd

But here you need to know the administrator's password. And here you don't need the administrator user, you can use other users in the same management group to start cmd, the authority is also administrator, for example, there is a user in administrators called: abc then you can use the command:

runas /user:abc cmd。In this case, you only need to enter the login password of the ABC user.

Method 1: Right-click the mouse.

This method is relatively common, click on it to find cmd, right-click the mouse "run as administrator (a)" so that the call is the administrator's permission;

Method 2: Shortcut mode.

After clicking on win+r, select "Run as administrator", and then confirm; Yes, this will still bring up the UIC prompt interface, select "Yes";

Method 3: Keyboard-only mode.

Click on the start, enter cmd in the input box at the beginning, at this time the shortcut of cmd appears, you can use the method of method 1 to enable the administrator call, but here you don't need a mouse, you can directly call the cmd of the administrator permission by holding down the three keys of ctrl+shift+enter;

Method 4: Command mode.

You can go directly to the non-administrator cmd and type: runas user:administrator cmd

But here you need to know the administrator's password. And here you don't need the administrator user, you can use other users in the same management group to start cmd, the authority is also administrator, for example, there is a user in administrators called: abc then you can use the command:

runas /user:abc cmd。In this case, you only need to enter the login password of the ABC user.

Please explain what kind of software?

Put it in the C drive, then run the cd in cmd, and then run the s on it.