Lenovo logo has been stuck here, can t turn on, what s the problem?

Dear Lenovo users, Hello.

Your problem is usually a failure of the hard disk or motherboard, it is recommended that you send it to the nearest service station for testing and repair.

IDEA Forum.

Think Forum.

Lenovo Community.

The system file is lost, go to the after-sales bar, the ordinary computer store does not have a genuine system.

Shut down and reopen to try, if you can't install a system yourself.

Hello, the pro computer boot stuck in the lenovo interface, the system can not boot boot for the following reasons:1The motherboard is not powered on.

Solution: Try to release static electricity (remove the battery and power cord of the computer, make sure the notebook is in a completely unpowered state, press the power switch 6-8 times repeatedly, continue to press and hold for 6-8 seconds each time, connect the power supply and try to turn it on), if it can be turned on normally, the fault will be solved; If it still can't be turned on normally, it is recommended to send it to the local service station for testing hardware. 2.

Faulty display or graphics card. Solution: It is recommended to send the local service station for testing hardware.

3.The system is compromised. Scenario:

If you are using a pre-installed genuine Win7 system, it is recommended to back up the data in the logo interface press Alt+F10 one-click restore; If you are not using a pre-installed system, it is recommended to back up your data and reinstall the system. 4.Failure of other hardware such as hard disks.

If my answer is helpful to you, please also give a like (comment in the lower left corner) Looking forward to your like, your efforts are very important to me, your support is also the motivation for my progress, and finally I wish you good health and a happy mood!

There are many reasons for this, and you can try it like this:

The first. 1. Disconnect all connected cables, including the cables of the monitor, so that the main chassis does not have any wires.

2. After opening the case, cut off the battery of the motherboard, and then press the power of the case, and press it twice.

3. Wait for one minute before installing the battery.

Plug in the line and turn it on, if it can be turned on, it means normal, if not, please see the second one.

The second type: 1. Disconnect all connected wires, including the cables of the monitor, so that the main chassis does not have any wires.

2. After opening the case, remove the memory module.

3. Then turn on the computer to see if there is a prompt sound: if there is no sound, it is likely that the motherboard is burning.

If there is an isometric dripping sound, it means that the motherboard can self-test, and there should be no problem.

4. If there is no problem with the motherboard, then install the memory module. Look at the third article.

The third type: 1. Disconnect all connected wires, including the cables of the monitor, so that the main chassis does not have any wires.

2. Open the case and take out the discrete graphics card, then repeat the first one.

3. Then don't install the discrete graphics card, connect the integrated graphics card of the motherboard, and turn it on.

If it can't be solved, and it still can't be turned on, then you may need to go to a repair point or Lenovo customer service.

Hello dear and happy to answer your <>

How to solve the problem of Lenovo logo when the computer is stuck in the logo interface1、Restart the computer, and then press the tab key to skip the logo screen interface,Or press the del key continuously to enter the CMOS setting interface when starting。 2. Turn off "Full Screen Logo Show" under "Advanced BIOS Features" to detect POST problems. 3. Press the F1 key to skip and start the computer directly, then press the F9 key to load the predefined parameters, select "Load Optimized Defaults", and then press the F10 key to save and exit and restart to solve the problem.

4. If the original CMOS parameters are not saved after restarting, it may be that the motherboard battery is faulty. After replacing the battery, repeat the above operation. 5. If none of the above methods work, you need to reinsert the hard disk or repair the master boot record of the hard disk or reinstall the system, and finally consider replacing the hard disk.

I hope this service can help you, you can click on my avatar to follow me, and if you have any questions in the future, you can consult me again, and look forward to serving you again. Wishing you well; Happy life, everything goes well [warm] [warm].

1. Please recall what aspect of the operation has been stuck in the boot interface when booting, such as whether you have recently made hardware changes (such as adding new memory) before this phenomenon appears, if so, it is recommended that you can restore the previous hardware configuration to try. If you have external devices connected, you can disconnect all external devices to see if they can enter the system normally.

2. If it is not easy to use, please keep clicking the F8 button when you start (or restart) to see if you can see "Choose to use the latest correct configuration", if you can see it, please select it and test whether it can enter the system normally.

3. If you can't enter the system, it is recommended that you can keep clicking the F8 button when you boot (or restart) to see if you can choose to enter the "safe mode". If you can enter safe mode, please recall whether you have performed some special operations on the software (such as installing a third-party software) before this phenomenon, if so, you can uninstall the corresponding software to try; You can also try to back up your data in safe mode.

4. If it cannot be solved, this situation may be related to the system or hardware. You can try to back up the important data in the machine and reinstall the system, if there is still this phenomenon after reinstalling the system, it is recommended that you send the machine to the local service center for testing, you can check the address information of the laptop service center in mainland China through the following page on the official website.