How to draw a teapot with proe

1: Create a file and create a name. Select the Rotate command, enter the sketch with front as the reference plane, draw the centerline, arc, line, dimension and modify the dimension, and confirm.

Rotate out the entity at an angle of 360 degrees, OK. Main Menu Insert Drop-down Scan Extension Item, Sketch Trajectory Front Forward Draw Handle of Teapot Merge End Draw Ellipse, Dimension, and Modify Dimensions OK.

2: Sketch command, select front as the datum plane to enter the sketch, draw the spline, mark the size and modify the size, and confirm. Insert the drop-down sweep blending option in the main menu, select the sketch curve as the trajectory line, enter the sketch draw circle, dimension, OK, then insert the second section into the sketch, draw the circle, dimension, OK, continue to insert the third section, draw the circle and dimension, OK, insert the fourth section, draw the circle, dimension, OK.

3: proe round command to retouch the teapot. Select the Shell command, select the top of the teapot and the spout of the teapot, exclude the handle surface, and enter the shell thickness as:

5. OK. Select the sketch in the Model Tree to hide it, select the Round command, and select the lid and spout to round.

In fact, there are quite a variety of ways to complete this modeling, according to me, this kind of teapot should be used first solid and then shelled, if the surface is good, I believe that the surface operation will be completed sooner!

Different teapots, different ways of drawing, the same teapot, can also be different ways of drawing.

That depends on what kind of cup it is.

A simple glass is done with one rotation: draw the facet of the cup with the sketch tool and rotate it into a solid shape along the central axis.

The cup with a handle is first rotated to form a solid body, and then a scan is added: the scan trajectory is determined, then the cross-section of the cup lug is sketched, and the trajectory is scanned, and the ball is rolled at the junction.

The special-shaped cup has to be mixed with a curved surface, such as a cup with a square bottom and a round mouth: first sketch the bottom surface of the square finch to do, fill it into a curved surface, and then determine the height, sketch the round mouth of the cup, and determine the four mixing points of the pure Xian Sui, mix with the square surface of the bottom surface to form the outer wall of the cup, and finally use a thickening tool to determine the thickness of the cup wall to form an entity.

The above is just a general framework, and the detailed process is very cumbersome to describe in words, so read more books.

How to draw a pouring cup for proe wildfire1、First open the proe wildfire and draw a cup。

2. Then cut off an inverted triangle at the top of the cup as a gate.

3. Then use the hybrid feature on the top of the inverted triangle for the starting surface to draw a cross-section with the thickness of the triangle.

4. Finally, Hua Zumin draws the second section at the bottom of the inverted triangle, so that the pouring cup is completed.

How to use the Proe Drawing Cup to open the Pro E software, create a new part - enter the sketch interface, select the sketch plane, and sketch view direction.

Draw the body of the cup first, and draw the figure according to the picture below.

Select the Rotate command to rotate the cup out.

Select top as the sketching plane. Enter the sketch interface.

Next, draw the shape of the quilt target.

In the insert - scan - protrusion.

Sweep Track—Select the track.

Select the lines of the quilt target as the scanning trajectory.

Done, let's define the interface.

Draw a graphic of the interface.

Scan complete, preview. Look at the shape of the cup.

How to draw a beaker with proe, the specific steps, especially the beaker's mouth. Thank you 1 for spinning a cup.

2. Cut off an ear at the top of the cup, including an inverted triangle.

3. Adopt a hybrid feature for the starting surface at the top of the inverted triangle, draw a cross-section with a triangle with thickness, draw a second cross-section at the bottom of the inverted triangle, in fact, add a point, this point should merge all the nodes of the above cross-section to this point, and then enter the height of the two cross-sections.