How to log in to the router when the laptop is connected to wifi

How to connect to wifi for win7 notebook

To let the win7 laptop connect to wifi, that is, let the laptop go to the Internet wirelessly. For notebooks, in order to meet the requirements of connecting to wifi wireless Internet access, the following conditions need to be met.

1. The notebook has a built-in wireless network card, and the driver is installed normally;

The vast majority of notebooks have a built-in wireless network card, which we can check in the device manager and detect if the driver is working properly, as shown in the image below.

Win7 Device Manager.

As shown in the figure above, notebooks generally have built-in wireless network cards and ordinary non-wireless network cards, and the two graphics card drivers in the above picture are normal, if the drivers are not normal, there will be a question mark in front of their names.

wireless network, so you can directly tap to connect, as shown in the image below.

ps.If you can't find Wi-Fi on your laptop, it may be that there is no Wi-Fi available around you.

The laptop needs to enter the wifi password for the first time to connect to wifi, and you can connect it after entering the wifi wireless password.

How to connect a win7 notebook to a wireless router.

Win7 notebook to connect to the wireless router, mainly by 2 ways:

1. One is to connect the laptop to the wireless router with the network cable, and then enter the wireless router login address (for example, you can log in to connect the wireless router;

2. The other is that the laptop has been connected to the wifi wireless network of the wireless router, so you can connect the router wirelessly.

The method is also in the browser, enter the wireless router login address, most wireless router login addresses are, some different, you can look at the nameplate standard on the surface of the router. After opening the wireless router login interface, enter the password to log in, as shown in the figure below.

After successfully connecting to the wireless router, we can view various network parameter settings in the router settings, including changing the wireless password, viewing wireless network information, etc., as shown in the figure below.

The above is how to connect the win7 notebook to wifi and connect to the wireless router method introduction,Suitable for white friends to read,In fact, the operation is very simple,As long as you are proficient in computer operation,I believe everyone understands。

To connect your laptop to wifi, you need to follow these steps to set it up:

1.Turn on your laptop and make sure the wifi adapter is enabled.

2.Look at the status bar in the bottom right corner of your computer, find the wifi icon, and tap on it.

4.If required, enter a password or other security verification information.

5.Wait a few seconds until your laptop is successfully connected to the WiFi network.

If you can't find any available WiFi network, check if there is WiFi coverage around you and check that your laptop is set up or set to automatically search for wireless centering networks. If you've tried these methods and still can't connect, contact your network administrator or device manufacturer for more help.

Start setting up --- --- network and Internet--- Wi-Fi Peizu set up a disadvantage for the opening of the matching.

1. Right-click "My Computer" on the desktop and select Device Manager to open; Withered bucket.

2. After opening the Device Manager Pure Circle, find "Network Adapter" on the device page and double-click to open it;

3. After opening, you can see that there is a wireless network card driver under the network adapter. Right-click on the wireless network card driver and select the following property options;

4. Then a dialog box will pop up, in which you can see whether the network card driver is running normally. If it doesn't work, click the start button below;

5. A dialog box will pop up when you click to start, and you can click "Next" directly without doing failure;

6. After the startup is completed, a wireless signal will automatically appear at the bottom right of the computer desktop. Click with the left mouse button to see the wireless network. Connect to wireless and you can access the Internet;

7. If you can't find the wireless network, you can right-click the desktop network connection icon and choose to open the network and sharing center;

8. After that, click on the Wi-Fi button on the right. The Local Properties option will appear;

9. Click the attribute button at the bottom left of the property options to enter the settings panel;

10. Select Internet Protocol version 4 in the settings panel. Double-click with the mouse to the IP Settings option;

11. Select "Automatically obtain IP" and "Automatically obtain DNS" in the pre-selection of automatic acquisition in the settings panel. Once you've made your selection, click the OK button below to save. You can search for wireless networks.

Start setting up --- --- network and Internet--- Wi-Fi Peizu set up a disadvantage for the opening of the matching.

Method Steps:

1. Click the icon like "Signal" in the taskbar in the lower right corner to open the list of wireless wifi

2. Select the wireless network that needs to be connected, the wifi without a password can be connected normally, and if you set a wifi password, you need to enter the correct password to connect, <>

3. Enter your wireless wifi password, this must be correct before it can be used.

It should be reminded that it is important to confirm the security of wireless wifi to avoid computer poisoning or information theft.

4. Want to find computers, devices, and content on this web and automatically connect devices such as printers and TVs? One click on the quirk is.

5. The connection is successful, and the wireless icon is connected, and you can access the Internet when you are connected.

The specific connection method is as follows: the line out of the ADSL cat is connected to the WAN port of the router, and the LAN port of the router is connected to the wired network.

There are usually 4 or 8 of them. Telecom is limited to 4 IPs

Note: Two cats cannot be used together and then connected to the router, otherwise the routing WAN port will not be able to connect.

If you want to use the router as a tap,You only need to connect the line out of the adsl cat to the LAN port,And then use the LAN port to connect it to the outside.,If you don't understand the specifics.,The landlord will ask me if he has time.。