-
Mine is Soison's M608,Support 4G,Sollove in M608 or M600 is basically memory stick duo before,Later it was replaced with M2 card,Now the M2 card already has4G,Help you check,W810C is supported to expand to4G,It's memory stick duo (short stick type),(A little different from the occasional M2).Personally, I think the general 2G is enough,If the landlord needs 4G, there is no problem.,My colleague's Soai P990 put 4G,I don't feel the card.。 Here are the parameters for 810c**.
The landlord is not at ease, he can take a look for himself. But my classmates have used this machine.,Said to put a 2G card.,Reflect a slight slowdown.,It is recommended that the landlord does not particularly need to use 2G to be more safe.。
-
Landlord , Sollove W810 fully supports 4G memory stick (including high-speed card) ,I am now using a 4G high-speed card,The machine reads very fast,Buy 4G,2G is too cost-effective!
-
Yes, the high-speed card W810 can be used. As for the 4G card, 810 can be used, but the question of whether it will be slow depends on the situation of the specific machine. There are also people who have used 8G cards on W810.
-
When I bought a 2G 810, the card slot didn't support 4G
-
Hehe. I'm also using the little 8
It's best to use a normal 2G card.
Otherwise, it's not good for the phone.
-
Miss! Is it K810?Or w810?Make it clear.
-
The maximum support is 2G, and the 4G card W810 does not support it.
And with 2G, the reflection speed may be slower, your card is high-speed, but it makes no difference in the mobile phone, it is generally used for PSP
It's good to buy a regular one.
-
Yes, M2 memory sticks.
However, it is official that the official decision is to use the T card (which is the common kind of small card).
M2 will not be used in the future.
-
It is related to a model.
In the past, M2 cards were basically used, but now Solson has slowly had the idea of standardization and unification, so some mobile phones have adopted the very popular and relatively cheap SD card.
-
The current ones are M2 memory cards, which are dedicated to Sony Ai mobile phones, and the price is relatively expensive, 1G costs 80
-
Basically, I use Sony memory sticks.
The price of this memory stick is a little more expensive than the price of a regular mobile phone memory card.
Most of the multi-function card readers on the market can be used.
-
The so-called extension.
It is to plug in the M2 card with more memory in the mobile phone.
So the price point of the M2 card is high.
If you don't want to save a lot of things, it is recommended that you match the M2 card of 512, which is enough for the M2 card of 512, which is currently 150 yuan.
-
Simple.
Buy a bigger M2 card and replace it with.
You go to a place that sells mobile phones or mobile phone accessories.
Expandable up to 2G
-
M2 is an expansion card. Abbreviation for memory stick micro.
-
You mean the memory card, it seems to be 32G, but I think 4G and 8G are enough.
-
It is very likely that the memory slot of the mobile phone is in poor contact or simply broken Go to customer service to check the memory card slot first I don't know if the slot inside is connected to the motherboard Otherwise, if it can be repaired, it can be repaired, and it can only be replaced by the motherboard It's hard to say It's better to go to customer service Let them give the most authoritative explanation.
-
Mine is a little 8 asked.
If the key sound is not.
Then others will only be shocked if they are short-hearted and hit **.
So how can you make both key sounds no.
And then others are short-hearted and calling, and there is a voice.
Please tell me.
I don't know what key to press.
It would be better to be more detailed, small thanks.
-
Maybe the memory card slot of your phone is oxidized or covered by dirt, in the shutdown state, clean it with tweezers and an alcohol cotton ball, and try it when it is turned on after drying.
If this doesn't work, it should be a hardware problem, or send it to customer service.
-
That's the problem of the little 8.,Send it to customer service to flash the machine.。
-
I'll give you a suggestion, you go to the Sony Ai professional forum, to the special area of your mobile phone model, you can find the answer, even if you need to flash the phone, don't worry, there is a flashing area in the Sony Ai professional forum, which has flashing tutorials and flashing software for all mobile phones, first look at the tutorial and then flash the phone!
-
After formatting, it also shows that it is poisonous, which means that your computer is poisonous, first upgrade the antivirus software to deal with the virus on the computer, and then format the card.
-
You disinfect the virus first, and then check the disk, and the computer is completely antivirus.
-
Then you can format the card with your phone.
-
The first step is to take off the card and reinstall it again to see if you can find it;
The second step, if the symptoms are not resolved, install the card on someone else's machine to see if it can be found, if it can, it may be that there is a problem with your machine, if not, there may be a problem with the card;
Step 3, if there is a problem with the machine, please go to customer service to repair, if there is a problem with the card, it is recommended to replace the card!
-
Do you use them all? Rich people
After thinking about it for a while, it should be the W series, and I thought it was the K series.
There is a similar problem with the M2 assembled with P1! There is no such problem after changing the original! I specialize in mobile phone memory cards! >>>More
Ha ha! All of the properties behind the computer you provide are useless. But I think you're really humble and think a lot. >>>More
There's a small switch on the card where the card is put on, and that's the thing.
After selecting the files to be recovered, the system will jump to this interface, asking you to select a logical drive to save the recovered files, here you must note that the selected drive must have enough remaining space, at least larger than the total amount of data to be recovered, this is very important, otherwise there will be data recovery failure. When choosing a drive, it is best to create a new folder, for example, if you want to restore to the X drive, it is best not to directly select the X disk in the target drive, so that the recovered scattered files will be directly copied to the root directory of the X drive, and it will be very troublesome to find the recovered data, so it is recommended to create a new folder named "shujuhuifu" in the X disk, and then point the recovery target to it, and it will be easier to look it up at that time. After selecting the recovery destination drive, we click Next, then make a cup of coffee and wait patiently for the recovery of the dataAfter a short system scan, the software will load all the disk letters inserted into the computer, select the partition you need to recover on the left, and click Next to start scanning the drive that needs to be recovered. >>>More
cities land** piece.
system, private, sys, resource, installs are all things about system files and the software you install on the card, and generally not delete things here. >>>More