Fax old can t go out, what s going on

The fax machine cannot send out the fax, and the fax is always displayed for the following reasons:

1. If the line is not connected correctly, or the external line is faulty, contact the service provider for testing;

2. The main control board of the fax machine is damaged, and the main control board is replaced;

3. If there is a problem with the fax machine setting, do the initialization operation according to the manual;

4. If there is a problem with the hardware quality of the fax machine, contact the after-sales inspection fax machine.

It should be that there is a problem with the fax protocol compatibility of the fax machine, this kind of problem is more common, and it is often found that one or two numbers just can't be sent, you can use fax software to try.

How to send and receive faxes on a laptop (**).

How to send and receive faxes on a computer].

Is it the same fax machine at headquarters? It is possible that the person who gave the signal hung up too early.

The possible reasons for unsuccessful fax transmission are:

1. The fax number of the other party entered is incorrect.

2. The external line function of the fax machine is locked.

3. The fax machine ** line is not good.

4. The other party is busy and does not give a signal.

5. Fax machine failure, etc.

Fax is the fastest growing non-telephone telecommunications service in the past 20 years. A communication method in which still images such as text, charts, and photographs recorded on paper are converted into electrical signals through scanning and photoelectric conversion, transmitted to the destination through various channels, and a series of inverse conversion processes at the receiving end to obtain a copy of the record similar to that of the original being sent, which is called fax.

The fax machine can receive the fax, but it can't send it for the following reasons:

1. The signal of the sender is not good, change to another fax number and then try to send, if the problem is still sent by other numbers, contact the server of ** to detect whether the external line is normal.

2. The fax machine sending settings are incorrect, and the fax machine settings are re-initialized (different fax machine initialization methods are different).

3. Check whether the ** cable is connected correctly, the ** wire must be connected to the LINE jack.

It is recommended that you spell the model of the machine in its entirety, English letters and numbers, so as to facilitate the specific information of your machine.

Find the fax driver in the device and printer, delete it to solve, the specific steps are as follows.

2. Click [View Devices and Printers].

3. Find [Fax], right-click, and click [Delete Device].

Abstract:The fax machine is an office equipment that transmits documents, and can convert text and paper documents into communication instruments through the terminal signal. When operating, it will always encounter that the fax machine cannot receive the fax, and there will always be a few vertical black or white lines on the interface.

This may be a stain on the printed part inside the fax machine, and you need to wipe the stain on the part with a soft cloth that wipes alcohol. Let's learn about the reasons why the fax machine can't receive the fax and how to deal with it. Troubleshooting if the fax machine does not receive the fax.

1. When the fax machine copies and sends documents, it will always show a few vertical black lines or white lines on the interface, resulting in unclear expression of the received fax documents;

2. After turning on the fax machine, the LCD screen does not respond, and the power indicator cannot be on constantly, resulting in the fax machine not receiving the fax in time;

3. When the fax information is received, there will always be a "stinging" and "stinging" alarm sound, and the normal transmission process of image fax;

4. The paper of sending and receiving fax is tilted, resulting in the fax machine being stuck and unable to receive fax messages;

5. The keys on the fax machine fail and do not respond, which is what we often call the "crash" phenomenon.

Troubleshooting when the fax machine does not receive the fax.

1. The reason for the black line and white line is very simple, the printing parts inside the fax machine are stained; You need to wipe the stains on the parts with a soft cloth that wipes alcohol;

2. If the LCD screen and indicator light are not lit, it means that there is a problem with the power supply: you need to check whether the power fuse is burned out; Check that the plug and socket of the fax machine are tightly connected; Under the normal circuit, it is necessary to consider whether the LCD display is faulty and damaged, and it may be that the display motherboard is burned out;

3. The harsh sound is mostly the cause of the failure of the circuit motherboard: check whether the cover of the paper magazine of the fax machine is covered up and down; Check whether the sensor parts of the fax machine are intact and the circuit safety of the main control board;

4. The treatment of paper tilt can be repaired by adjusting the flexibility of the paper tray; Check whether the fax machine is in close contact with the fax paper;

5. The buttons of the fax machine have the function of "locking", so the button will not work if it is locked, and the fax machine can be restarted for cycle detection.

How to maintain the fax machine on a daily basis.

Environment: In order to use the fax machine safely, it is necessary to avoid light, radiation, dust, rain and humid environment; When there is lightning, cut off the power supply of the fax machine, and it is best to unplug the ** line of the fax machine directly;

Placement: The fax machine needs to be placed on a horizontal desktop or Pingsen section table, because the fax machine will dissipate heat during work, so it should be avoided to be placed with other electrical products;

Switch operation: Do not frequently turn on and off the fax machine, which will aggravate the aging of the internal parts of the fax machine and reduce the service life of the fax machine.

This is for you to set, press the setting key, then press 04, use +, —to adjust, you go and see the put.

Dial first.,Wait for the other party to send a signal to come and beep and then press start.,If not, check whether your information is put in place.。

to turn off report, press 'meun' # select off using '+' or '-'

You may have written the above text wrong, it should be report, in this case, it means that you need to print the report when faxing, it may be that the printer has no paper or the machine itself is a problem, it is recommended to put enough paper in the equipment, it should be caused by the previous job and no output.

Let's talk about the fax machine, now almost no one uses the fax function, scan to the mail, or directly send electronic fax, which not only saves costs but also improves efficiency, and now many enterprises do not even have the best line, all digital office, so it is recommended that you choose an all-in-one machine, so that you can use it for a few more years. If you talk about products, you can consider Lenovo's small new series of products if you buy them in the general office, all of which do not exceed 1000 yuan, such as M7268W, as well as this year's new Lingxiang series of products, M100W, all wireless function support, and because it is a domestic brand, there is a special Huawei interface, which is very convenient to use, the appearance is super good, and the cost of consumables is as low as 99 yuan. Hope to consider!

If other people have tried the method, you can consider the optical attenuation problem of the optical fiber on the optical cat connected to the ** line used by the fax, the optical fiber attenuation does not affect the normal call, but it will affect the sending of fax, this is the actual case of fax in my office, it took two weeks to find the problem, the operator and the computer company push each other, the computer company detects the fax machine is normal, and the telecommunications company can talk normally. Finally, replace the fax machine to confirm that it is not a fax machine problem, it should be a ** line problem, continue to report the fault, a new telecommunications company thought of measuring the light attenuation, and found that the light attenuation was too large, he went to adjust the joints at both ends of the optical fiber, the light attenuation was normal, and then the fax was normal, and there was basically no communication error later.