Does the Honor 7 take too long to charge and affect the battery?

Generally speaking, the battery charging time should be according to the manual, too long and too short will affect the life.

1. The harm of charging mobile phones for too long.

It is easy to break down the battery and damage the battery.

It is easy to damage the battery life, because the battery has a life, and it will be rushed all the time, which will reduce the number of times the battery is used and the life.

It is easy to cause the liquid in the battery to flow out, which is toxic to the air and the human body.

Battery radiation tends to increase.

The battery performance can be easily damaged.

2. Suggestions for charging mobile phones.

It is recommended that the phone should be charged for a little longer on the first charge, so that the purpose of this is to activate the battery so that it can use its maximum potential, which is conducive to the life of the battery in the future.

In general, the size of the battery capacity is indicated on the battery, in milliamps, the larger the value, the larger the capacity. For example, 1200mAh means that the capacity of the battery is 1200mAh.

At the same time, the charger is also generally marked with the charging current, which is also measured in milliamps. In this way, the length of time the battery can be charged simply by dividing the battery capacity by the charging current, multiplying by the factor 1 2, and the time unit is hours.

For example, if the battery capacity is 1200 mAh and the charger charging current is 600 mAh, the charging time is: 1200 mAh 600 mAh 1 2 2 4 hours, i.e. 2 hours and 24 minutes.

When the first three charges of the new battery, especially the nickel-cadmium battery and the nickel-metal hydride battery, the belt machine should be used to charge, and the battery must be charged for about 15 hours, so that the battery life can reach the maximum value. In the future, you can refer to the above method to calculate the battery charging time. Don't think that the longer the rush, the better.

Third, the role of mobile phone protection circuit.

We generally ask PCB (Protection Circuitry Board) Some people also call him PCM, he generally has - overcharge protection - overdischarge protection - short circuit protection - overcurrent protection, mobile phone batteries are closely related to human safety, so the general mobile phone battery has double protection, if there is no protection line, lithium battery is quite dangerous.

Overcharging here means that the battery voltage is charged to the upper limit of the battery charging voltage, and the protection board is generally set in this way, as if the charging protection detection point is, the detection delay time is 200 microseconds, and the battery will be protected when the condition is reached, and it cannot be discharged, and then if you want to rush into the power again, you must discharge, or wait for a while after the voltage will fall to a certain extent, for example, when the charging protection is released when it falls back to 4V, so that you can continue charging.

Charge for 3-4 hours, and then fully charge. Even charging for a long time has no effect, but increases the harm.

Lithium batteries have no memory function and can be charged at any time without affecting the lifespan. However, lithium batteries are afraid of overcharging and discharging, do not use them until the power is exhausted and then charge, and do not charge them for a long time for 12 hours, which will affect the battery performance, shorten the battery life, and in serious cases, it will swell or **.

The Honor 7 can be used by light users, and the battery life can reach two and a half days, and the use time of heavy users can also reach about a day, and it can be charged for 5 minutes for 1 hour**.

According to the test, the Huawei Honor will definitely not have a problem with daily use, and the fast charging is also impressive, and the battery life is better than that of ordinary Android phones. As for whether it can be used for 2 days for daily use, it mainly depends on how you usually use it.

The Honor 7 uses a 3100mAh large-capacity battery, although the capacity is not particularly large, but this battery is designed with 600Wh L high energy density, which is the current top battery density level.

For fast charging, the Honor 7 only took 75 minutes to charge from 0% to 100% in the shutdown state, which means that it can be fully charged in a little more than an hour, and it takes two and a half hours for ordinary mobile phones.

The Honor 7 comes standard with a 3100mAh lithium battery, and at the same time provides a variety of power-saving modes.

In the case of normal use, the Honor 7 can still be used for more than a day! **If you don't play many games, two days is no problem! In addition, the Honor 7 also supports fast charging, with a fast charger, it can support 1 hour of continuous talk after 5 minutes of charging, 50% of the charge in 30 minutes, and it takes about 1 hour and 25 minutes to fully charge from empty power.

The solution to the slow charging of the Huawei Honor 7 phone is:

Use the standard charger and cable.

Clean your phone's charging connector and jack.

Do not use your phone while charging.

Close apps running in the background while charging.

The reason for the slow charging of Huawei Honor 7 mobile phones:

Products that do not use the standard charger and data cable and support super fast charging must use the standard super fast charger and the standard data cable to perform super fast charging, and the use of other models of chargers and data cables will be normal charging or cannot be charged.

Charging is slow when the ambient temperature and mobile phone temperature rise. When the temperature is high, the charging current will gradually decrease, and the charging speed will slow down until it is fully charged.

When charging, the charger, data cable, and mobile phone charging interface are not in good contact, which will lead to slow charging, and plug and unplug the charger several times.

If you find dust on the joints and jacks, it is recommended to wipe them with alcohol or clean them with a brush.

1.It is recommended to activate the battery by the way while charging it in the future, so that there is no memory when the battery is charged.

2.Charge with an AC socket, charge to 100% and turn off the battery, then charge in the shutdown mode until the light turns green.

3.Enter the recovery mode, select advancsd advanced mode, select wipe battery, and clear battery traces.

4.Turn on and charge to 100%, so that your battery has no memory and can be charged much faster in the future.

It is normal for mobile phones to heat up when charging, especially for mobile phones that support fast charging function, the current and voltage are large when charging with fast charging, so the temperature is higher than that of ordinary chargers.

In order to avoid serious heating of the mobile phone, it is recommended that you:

1. Avoid using your phone while charging.

2. Put the mobile phone in an environment with good heat dissipation (such as a desktop) to charge, and an environment with poor heat dissipation (such as a bed) will cause the heat of charging to be unable to dissipate, so that the temperature will rise.

3. It is recommended to turn off the mobile phone for charging, and restore or upgrade to the latest software version in time. (It is recommended that you back up your data in advance).

4. It is recommended to use the standard charger for charging.

Hello, don't turn on when charging, because boot charging is not good for the battery, plus there are too many running backgrounds, resulting in the battery charging and discharging at the same time, which will cause the temperature to rise, turn off the charging and try it, if it still doesn't work, go to the after-sales service to test the phone.

Honor bai7 mobile phone theoretical talk time du

960 minutes zhi

The Huawei Honor 7 can be fully charged in 2-3 hours with fast charging.

The mobile phone is divided into three versions: mobile version, telecom dual 4G version, and full Netcom version.

Glory7It also added a fingerprint recognition module for the first time,Same as Huawei Mate 7,Glory7The fingerprint module is placed below the back camera of the mobile phone,Unlike the former,Glory7Upgrade the function of the fingerprint recognition module,In addition to encrypting the mobile phone and mobile payment,The new sensor supports touching and returning to long press to achieve the home button function,At the same time, there are functions such as sliding down the trackpad to see the status bar、Double click to clear notifications and other functions。 It deeply integrates Internet resources and services, and realizes the breakthrough experience of consumers in mobile Internet life for the first time.