Computer win10 system file loss leads to always blue screen

The causes of blue screen tend to focus on incompatible hardware and drivers, problematic software, viruses, etc. Workaround:

1. The cause of the virus. Use PC Manager to disinfect the virus.

2. Reasons for memory. Use an eraser to wipe the gold finger of the memory module and wipe off the oxide layer to ensure that the memory module is installed and running normally.

3. The chassis is not clean. The CPU fan has too much dust to run normally, causing the CPU temperature to be too high, so use a brush or hair dryer to clean up the dust on the inner wall of the case, the CPU fan, the graphics card fan, and the motherboard.

4. There is also a possibility that the system is unstable, at this time, you need to restart the computer and press F8 to enter the startup menu item, select"Boot to the last correct configuration"。

One; If your computer often has a blue screen, whether you reinstall the system or later reinstall the system, or the blue screen still appears, it means that the hardware is causing the problem. The one that directly affects the hardware of a computer is the memory module or graphics card.

The cause of the problem is the blue screen phenomenon caused by the oxidation of the gold finger of the memory module or graphics card or the poor contact of the slot.

Two; It's a bad sector on the hard disk, when the computer reads the bad sector, it's stuck, the background is still running, the CPU occupancy rate is immediately very high, and then it's a blue screen, processing method: under normal circumstances, it is repaired with HDD, if it can't be repaired, which can only change the hard disk.

Three; That is, the video memory chip of the video memory and graphics card appears virtual soldering, and the blue screen will continue to appear, and the method is to add solder to the video memory.

Blue screen. 1. Insufficient virtual memory, many netizens like to make full use of their hard disk space, resulting in insufficient space hard disk space and arithmetic errors, resulting in blue screens.

2. CPU overclocking leads to operation errors, overclocking, in itself, is to complete higher performance on the original basis, but due to overload operations, it causes too many internal operations, which overheats the CPU, resulting in system operation errors.

3. The memory module is incompatible with each other, and the computer cannot be started at all if there is a problem with the memory module, and the screen will prompt that the computer has a memory problem.

Win10 common computer blue screen and solutions.

Hello, it is recommended that you go to the computer city near your home and buy a CD back.

The solution to the computer blue screen can't enter the system: Generally, the blue screen at boot is related to your operation before shutting down.

1. Press F8 immediately after booting to the advanced option that appears in the let go, and select "The latest correct configuration" Enter to repair.

2. It is not possible to press F8 to enter the safe mode to restore the system or reinstall the system:

2) On the boot screen, press the start shortcut key to set the U disk to start.

3) Enter the Win8PE interface, and use the Diskgenius partition tool of the Sweet Potato U disk boot disk to quickly partition.

4) In the installation interface, select Win10 system and store it in C drive.

5) Once the installation is complete, reboot it.

3. If the reinstallation is also a blue screen, it is recommended to overhaul it, if you can enter the safe mode, it means that you have installed something inappropriate, uninstall all the inappropriate things before the accident, or restore the system or reinstall.