What should I do if my hammer phone crashes, what happens if my hammer phone doesn t turn on?

You can force restart your phone or do a factory reset after shutting down.

Hammer phone factory reset reference path: enter the phone [Settings] - [Global Advanced Settings] - [Factory Reset] to reset. If you set a lock screen password on your phone, you can restore the factory settings only after entering the correct password.

Note: 1. The first boot time after restoring factory settings will be relatively long, and the recovery process will take about 3 minutes, and the system will automatically restart after completion. If your phone stays on the boot interface for a long time and there is no response, please wait patiently, the first boot time is relatively long.

2. After the factory reset will erase the settings of the phone and the information saved in the phone, including accounts, text messages, contacts, call logs, etc., please back up your personal data in advance.

Generally, there are several reasons why the mobile phone crashes, and you can self-check. 1) Check whether there is a virus on your phone. If the phone suddenly and frequently restarts, it is likely that it is a virus.

You can use the mobile phone security guard to scan and disinfect the mobile phone first, and clean it up. 2) Uninstall some unnecessary software. If there are too many mobile phone installers and too many software running at the same time, it is easy to fail to run and restart.

3) Software conflict issues. If you think about whether you have installed or upgraded any software recently, it is often these software conflicts that cause the system to restart automatically, so you only need to uninstall the software that caused the conflict. 4) Factory reset.

If you can't be sure what software or plug-ins are causing your phone to restart frequently, you can choose to factory reset your phone and save the more important things on your phone before doing so. 5) There is a problem with the SIM card. In addition to the internal software problems of the phone, the hardware problems of the mobile phone can also cause the phone to restart, and the SIM card error is a common hardware problem.

Change a SIM card to the phone and see if there is a reboot to determine whether it is a SIM card problem. 6) Phone battery contact issues. Poor contact of the mobile phone battery will also cause the mobile phone to automatically restart, and you can take it to the mobile phone repair office for consultation and help.

The salad is also stir-fried, depending on the market

The first step is to use the most commonly used shutdown method of the hammer mobile phone to turn off the mobile phone, press and hold the home button at the bottom of the screen for a few seconds, and then the mobile phone response will enter the shutdown interface, which can be solved at startup.

Step 2: If the common shutdown method does not respond, and the phone is still in a dead state, then you need to press and hold the home and volume buttons at the same time for about 10 seconds to force restart the phone.

The third step, when the above two methods can not be solved, then it is necessary to send the mobile phone to the after-sales service for repair.

What happens if the hammer phone doesn't turn on? Dear, hello, if you click the power button and it doesn't respond and doesn't turn on, it should be that there is a security problem with the application software, and the system has started automatic protection. The following reasons cause the machine to be unable to turn on, solution:

1. If the battery is in poor contact or abnormal, it is recommended to reinsert and remove the battery for a restart attempt, if there are other batteries that can be replaced. 2. If it is an all-in-one design, the battery does not support disassembly, it is recommended to press and hold the power button and the volume up button (or home button) for 15 seconds to force restart. 3. Use the standard charger to charge for about 30 minutes, and then press and hold the power button again.

4. If the computer is successfully booted, it is recommended that the ** security app check the application and clean the junk file cache. 5. If the problem still cannot be effectively solved, it is not ruled out that it is caused by the failure of physical buttons or related power management components, and it is recommended to send it to the warranty site for processing. I hope my answer is helpful to you, and I wish you good health and a happy mood!

The general workaround steps are as follows:

1. First of all, see if the hammer can also be shut down or restarted, the specific method is to press and hold the physical home button in the middle of the hammer screen, under normal circumstances, press and hold the home button for 3 seconds will pop up the shutdown or restart option, as shown in the figure below.

2. If pressing and holding the home button does not respond, you can try the shortcut to force shutdown.

At the same time, press and hold the [home button] + [volume + button], about 8 seconds or so, you can generally force the hammer to shut down, after shutting down, press and hold the home button for about 3 seconds to turn on.

Note: The hammer power button is the home button in the middle of the bottom of the screen, and the volume + button is located on the right side of the fuselage.

3. If the above two methods cannot be turned off, it is recommended to put the hammer screen on the side and wait for the phone to automatically run out of power until it automatically shuts down. After turning off the machine, use the charger again, charge it for a period of time, and then turn it on again.

In addition, the hammer crash problem can also be solved by the buckle battery, of course, this situation needs to be disassembled, because the T2 disassembly is difficult, so it is strongly not recommended to use this method.

Wait a minute. Now the hammer mobile phone has been used for a long time or the memory of the mobile phone is insufficient, which will produce a series of problems, such as sudden flashback, sudden black screen, very slow network entry speed, crash and so on. However, most of the problems can be solved by yourself, and if you can't do it, you can call repairing the phone or changing the phone.

So what should I do if the hammer phone won't turn on? If the hammer mobile phone can't be turned on, you can choose to reinsert and remove the battery and then restart, you can also press and hold the power button and the volume plus key to force the shutdown and restart, and you can also use the original charger to charge for more than half an hour before trying to turn it on, if many methods can't be turned on, then you need professionals to repair it.

Although the hammer phone rarely has a black screen of death, some people have encountered it, many friends are very panicked when they encounter a crash, thinking that the phone is broken, we can try to force restart the phone first to see if it can be solved, the following are the specific operation steps.

When we use the hammer mobile phone, if we encounter a black screen and can't turn on normally, don't panic first, see if it automatically shuts down because of low power, we charge it for half an hour.

After making sure that the hammer phone has enough power, we press and hold the power button and the volume up button for about 15 seconds.

When the classic boot of the hammer mobile phone appears, the hammer logo interface can be released, and the mobile phone will restart successfully after a while.

Then the phone turned on quickly, and the hammer phone rarely had a black screen, and you encountered a situation where you could force restart the hammer phone according to the above methods.