Which is better, EPS line or GRC line

Especially for the European style of high-rise buildings, it is very difficult to install cement components, the construction period is long, cracks will appear for a long time, and the durability is poor.

The EPS decorative line is made of demoulding B2 fireproof polybenzene ethylene as the main body, pasted with alkali-resistant glass fiber mesh cloth, and composite with a special adhesive outer protective layer. Not affected by temperature changes, cold and heat resistant; Unaffected by humidity and acid rain. EPS decorative moldings can be fireproof and will not emit toxic substances, which is an environmentally friendly high-quality decorative building materials product.

EPS decorative lines are cut by computer numerical control, which is quick to make, and there are many varieties and models, such as lines, Roman columns, window covers, bucket arches, etc., which can be installed on the four sides of the window, the door edge, the eaves corner and the wall; It makes the façade of the building more beautiful, and brings new and different ideas to the architects.

GRC is the exterior wall reinforced cement components, mainly used in the decoration of exterior walls, high-end villas or European-style buildings, especially for the European style of high-rise buildings, the installation of cement components is very difficult, the construction period is long, cracks will appear for a long time, and the durability is poor, and the use of EPS decorative lines, with the advantages of easy installation, economy, long durability and so on.

According to the current ** words, EPS lines are of course good, lightweight, easy to install, easy to spray paint, can also make a variety of shapes, the life is the same as the building, will not rot, and waterproof, moisture-proof, insect-proof and so on. You can try 18974733663 if you need it

GRC prefabricated lines are heavier in weight, there are potential safety hazards in high altitude, the geometric dimensions are not accurate enough, the joint joints are difficult to handle, and the installation is very difficult, and the steel expansion bolts are used for connection with the wall, and the expansion bolts are easy to rust outdoors, so that the wall produces rust, affecting the appearance of the exterior wall, the joints are easy to crack, not waterproof, there is no thermal insulation performance, and it can not prevent cold and hot bridges.

EPS line is a new type of exterior wall decoration line and components, which can completely replace the traditional cement (GRC) components, and is more suitable for installation on the wall of exterior wall EPS and XPS insulation, which can not only reflect the European, classical and elegant decorative style, but also ensure that the exterior wall of the main building does not appear cold and hot bridge effect; Especially for the European style of high-rise buildings, it is very difficult to install cement components, the construction period is long, and cracks will appear after a long time, and the durability is poor.

GRC can have the same life as the building, and it is wind-resistant, rain-resistant, and has a relatively large bearing capacity, but the European style of high-rise buildings, the installation of cement components is very difficult, the construction period is long, cracks will appear after a long time, and the durability is poor.

Compared with GRC, EPS is lightweight, easy to install, economical, and durable.

GRC is the abbreviation of glass fiber reinforced cement in English, which refers to the mixed material of glass fiber reinforced cement. GRC is a composite material composed of Polante cement mortar and alkali-resistant glass fiber, which also contains admixtures and admixtures. Its constituents usually are:

Cement, fibers, polymers, admixtures and other materials. Fast hard sulfur aluminate cement, low alkalinity sulfur aluminate cement, ordinary Portland cement, and white Portland cement are all commonly used cement varieties. The fibers used in GRC materials must be alkali-resistant glass fibers.

GRC is mainly used on the exterior of buildings, and can be seen almost everywhere in life: residential lines, Roman columns, door and window covers; Landscape railings, benches, sculptures, etc.

EPS is the abbreviation of Expanded Polystyrene, which refers to polystyrene foam, which is a lightweight polymer. It is a foam plastic that uses polystyrene resin to add foaming agent and heat it to soften it to produce gas to form a rigid closed-cell structure. EPS is not affected by temperature changes, is cold and heat resistant, and is not affected by humid climate and acid rain.

EPS is fireproof and does not emit toxic substances, and is an environmentally friendly high-quality decorative building materials product. EPS decorative lines are cut by computer numerical control, which is quick to make, and there are many varieties and models, such as lines, Roman columns, window covers, bucket arches, etc., which can be installed on the four sides of the window, the door edge, the eaves corner and the wall;

EPS advantages: light weight, its weight is about 1 6 of the GRC decorative line; Firmly pasted; The shape is processed at will; Easy to install; The decorative lines (components) are smooth and beautiful, and there are no gaps between the lines. Cons:

Because it is an EPS assembly line cutting and hanging slurry production process, it cannot be made for too complex decorative parts (such as reliefs, mountain flowers, etc.).

GRC advantages: infinite plasticity; Light weight and high strength; Ultra-thin technology, large size; Rich colors and diverse shapes; Good texture and texture; Environmentally friendly, no radiation; fireproof, waterproof; Anti-fouling, non-deformation, super durable; Good sound insulation and seismic resistance; The construction period is short, the maintenance is convenient, and it is easy to replace. Cons:

GRC main material is sulfoaluminate low alkalinity cement, heavy quality, if the installation is not well controlled, it is easy to have potential safety hazards, due to the principle of thermal expansion and cold contraction, the joint is prone to crack after a few years, is a problem that has not been overcome at home and abroad.

The material of EPS decorative components is expandable polystyrene, which is also the polystyrene board commonly used in our exterior wall insulation, referred to as polystyrene board.

GRC moldings are mainly made of gypsum and cement, and larger or longer components are also equipped with 4-6 cold-drawn steel bars.

Both can be molded, i.e., molded with molds.

GRC moldings are costly, heavy, and difficult to install (the steel bar needs to be welded with the main body), and it is higher.

The main features of EPS lines: 1. Light weight. The EPS line aggregate is polyethylene, and the weight of the finished product is about 1 6 of the GRC decorative line, and a person can move and construct it at will.

Second, the paste is firm. EPS decorative line is mainly bonded with polymer mortar and the wall, polymer mortar is made of organic glue added to inorganic material cement mortar stirring, long service life, firm bonding, and has national standards and specifications, and in a large number of engineering applications proved to be safe and reliable, thus avoiding the hidden danger of anchor bolt fixing construction and anchor bolt rust, but also completely solve the problem of cold and hot bridge of external wall insulation. Third, the shape is processed at will.

The EPS line adopts computer design and modeling, automatic cutting, and the production period is short. Fourth, easy to install. Using special bonding materials and methods, one person can install the construction, especially the large amount of line engineering, only need to be bonded and installed.

Fifth, there is no gap between the lines. The same gap filler material is used between the EPS moldings as the wall bonding, and all the gaps disappear, and there will be no cracks in future use.

EPS decorative moulding is a new type of exterior wall decorative line and components, my home is the source of the manufacturer, good quality and low price, there is a need for contact, 17319067426 Li manager.

A new type of exterior wall decoration components, Hangzhou Xiaoxiang foam is in production, ** is also real, 82698307 Mr. Huang.

Do you know eps is the insulation material Chinese name Benzene board, it looks like plastic foam, the full name is called, polystyrene foam insulation board, it can be cut at will according to the need, make any thickness of insulation, or any shape of decoration, and then anchor bolt fixed on the base wall, relatively grc is very light, not easy to fall off and hurt people, low cost, easy to form.

EPS is a new type of decorative line installed on the exterior wall, replacing the original GRC component, which is characterized by lightweight, easy installation, low cost, and diverse shapes.

This device can be seen like this.