ox00000000a ox0000001,ox0000001c,ox00000002 Computer often blue screen 2 doubts 1 I play all the bat

Blue Screen This passage in English says:

If there is an error or problem with any hardware on your computer: then you are asked to contact the dealer.

Whether it was a hardware or software issue, it was not said. ）

If there is a virus, it may be caused by a virus.

No viruses were found;

It is possible that there is a lot of dust, the machine is not cleaned, the CPU is not good to fan hot, etc.

Hard disk, memory, graphics card, memory, broken, is also a similar error.

However, it is also possible that dust is causing false alarms from these accessories.

Without professional knowledge, it is difficult to solve it by yourself, and the best way to solve it is to find a professional maintenance personnel to get it.

If you have a warranty, you can find a merchant who repairs your computer on the street, or if you don't have a warranty, you can find a neighbor and a colleague who is a computer master.

There are software detection methods, but it is difficult for ordinary personnel to learn, they are all English software, and there are many people who want to learn detection software.

For novices, it's even more of a waste of time, and there is a possibility of hardware problems, so the final conclusion:

Find a professional maintenance person to get it.

If you have a warranty, you can find a merchant who repairs your computer on the street, or if you don't have a warranty, you can find a neighbor and a colleague who is a computer master.

The street will not be expensive to check with this problem, dozens of dollars.

Hello, [0a] appears, this is: the driver and the software conflict!

1。Try to boot up, after the computer brand is out, press F8, Safe Mode, Cursor Select: Last Correct Configuration, Enter, Enter, Press Down! [Critical step].

2。No more, enter the safe mode, press enter, and after going to the desktop, antivirus software, full antivirus!

Quarantine" stuff, completely removed!

3。Reuse: 360 Security Guard, in the "Function Encyclopedia": "360 System First Aid Kit", point: start first aid! After restarting, click on the "File Recovery Area" and select all to completely delete the files!

System Repair, Select All, Fix Now! [Critical step].

Network Repair, Start Repair, Restart PC!

360 Security Guard, Scan Plugins, Clean Now! 360 Security Guard, System Repair, One-click Repair!

Kingsoft First Aid Kit], check: [Extended Scan], Scan Now, Process Now, Restart the computer!

4。If you can't do it again, unplug the graphics card and memory module, erase it, use a brush again, clean the slot dust and fan, replace the memory slot, etc.! [Desktop].

etc., uninstall the redundant, and only leave one, because similar software is not compatible with each other! [Critical step].

7。If it still doesn't work, you need to "one-click restore" or "reinstall the system"!

8。If there is a problem with the hardware, send it for repair!

0x000000a is mainly caused by problematic drivers, defective or incompatible hardware and software.

Processing ideas: 1. If you have the conditions, try to change the LCD monitor. (Consider that there is a difference in refresh rate between flat and LCD).

2. It is recommended that you change the system, because making a system is the best way to solve many compatibility problems3. Finally, plug and unplug the graphics card, and check whether the graphics card has the problem of capacitance bulging and chip overheating.

The above is my handling of this problem, I hope it helps you.

Some of the problems with the display (I used to have one) are the graphics card、I don't know much about it.

0x0000000a: Error Analysis: Mainly caused by faulty drivers, defective or incompatible hardware and software.

From a technical point of view. Indicates that there is an in-process internal request level (IRQL) in kernel mode that is too high to access memory addresses that it does not have permission to access.

Solution: 1) Since Microsoft can't help, you have to rely on yourself, please think carefully about when this error appeared; What you did to the system when it first happened; What was being done at the time it happened. From this information, we can find out the possible causes, so as to choose the corresponding dry solution to try to eliminate it.

2) If it appears when installing Windows, it may be because your computer does not meet the minimum memory and disk requirements for installing Windows.

3) Step 1: First open the command line cavity prompt and run"chkdsk /r"(Note: Not chkdisk, it feels like this, but .......)) command to check and fix hard drive errors, and if a bad track is reported, use the inspection tool provided by the hard drive manufacturer to check and fix it.

Step 2: Then disable all software that scans files, such as anti-virus software, firewalls, or backup tools.

Step 3: Right-click on the file and select"attributes"to check whether the version matches the version of Windows used by the current system. (Note: If it's XP, it should be C:WindowsSystem32.)

Step 4: Install the latest motherboard drivers, especially IDE drivers. If you have drivers for your optical drives and removable storage, it's a good idea to upgrade them to the latest version.

4) Use the driver and memory-related scenarios in the general solutions described earlier to exclude.

5) Uninstall all newly installed software (especially apps and anti-virus software that enhance disk performance) and drivers.

If you have any questions, you can use the computer clinic module in Tencent PC Manager to find a solution, and you can also use the hardware detection and expert assistance module in the toolbox, I hope it can help you.

The causes of blue screens tend to focus on incompatible hardware and drivers, problematic software, viruses, etc. (The above ** is usually caused by a faulty driver or system service.) Suggestion: Judgment round.

1. Try to restore the BIOS to its factory state first;

3. Is the driver of the hardware installed successfully after reinstalling the system?

4. It is best to reinstall the operating system first;

5. If there is still a problem after reinstalling the system, it is very likely to be caused by hardware incompatibility;

6. Consult with the merchant or friends who are familiar with the computer, maybe they will help;

1。If this is an accident, usually restart the computer and the symptoms will disappear!

2。Incomplete anti-virus (use anti-virus software, full scan and custom scan)!

3。Software conflicts, incompatibilities: redundant similar software installation, (360 Butler, software uninstall, find uninstall, again:

4。The computer system has stubborn viruses and Trojan horses or worms interfere with, or the system files have been lost (360 system emergency.

Rescue box or Kingsoft first aid kit, Kingsoft net shield, etc., any of them, full killing, and then: system repair).

6。There are new vulnerabilities waiting to be installed in the system (patched for high-risk and important, others are set to: ignore).

7。Poor contact and loose contact of the graphics card or memory CPU, or fan with dust cover, (unplug the eraser).

8。The memory CPU is overheated, and the heat dissipation is not good! (Don't turn on for too long, turn off and dissipate).

9。There is a bad comment plug-in on the computer! (Scan it out, clean it up immediately) or too much disk fragmentation, (System Tools), clean up the debris!

10。If it still doesn't work, the system files are missing! Or maybe there's a serious error in the system memory!

11。Try to press F8 after booting, press Enter, Enter, enter the safety mold Bright Formula, configure it correctly for the last time, and press it.

Try it! Or, go into safe mode, go to the desktop, and get a full antivirus!

12。Playing the game blue screen, generally the system does not support this game Liang Tang! (Change the game version or change the XP system).

Reinstall or upgrade to the latest version).

14。If it still doesn't work, you need to "one-click restore" the system or "reinstall the system"!

This answer is not copied from the Internet, all of it is me: "Liwang History", I have been "knowing" for a long time to summarize and practice myself, as well as the experience of the majority of netizens!

0x00000019 blue screen.

Cause: The disk drive could not find a fixed sector or track on the disk. This is a problem with the hard drive booting.

Solution: 1. Open the desktop case and re-plug the hard disk data cable and power cable, and replace the data cable with the motherboard interface. Replace a good hard drive cable.

Part 2: Use PE boot disk boot boot to repair hard disk partition, master boot.

Use the PE boot disk to boot into PE, open the partition tool Disk Genius, select the hard disk on the left, click Tools in the menu bar, check the partition table error, and rebuild the partition table.

Then click on the hard disk in the menu, click on bad sector detection and repair, and then click on rebuild the master boot record after repairing.

Then go back to the PE desktop and click Windows Boot Repair, and select C drive to repair.

0x0000001a (equivalent to the modern blue screen representation of bccode:1a).

Error name 0x0000001a: memory management

Failure analysis 0x0000001a error indicates that there is a problem with memory management. This error is usually caused by a malfunction of the hardware device. If you encounter 0x0000001a error, it is recommended to check if you have recently installed a new hardware device or driver.

If so, uninstall the most recently installed hardware devices or drivers to see if the problem is resolved. Also, if you encounter a 0x0000001a error while installing Windows, please check whether the memory capacity and specifications of your computer meet the requirements of Windows.

0x0000001a:memory_management

Error analysis: This memory management error is often caused by hardware, such as newly installed hardware, memory itself, etc.

Solution: If it occurs when installing Windows, it may be because your computer does not meet the minimum memory and disk requirements for installing Windows.

If it is helpful to you, please adopt it in time

There are two possible scenarios for this.

One kind of memory module is broken or the gold finger contact with the motherboard is not good (gray), one is that the file of the system itself is damaged, and you can reinstall the system.

Under normal circumstances, there is a problem with the system files, and it is good to reinstall the system. Go to a computer repair shop, buy a pirated crack system for 5 yuan, and install the disc fool in one step, and it's easy to get it.

I feel like it's a memory problem, and if you reinstall it and it's still a blue screen, it should be a memory problem.

It should be a hardware issue. Use the test card and try it out.