How to install the full encirclement mat and how to install the full envelope mat

The main function of the car mat is to prevent anti-slip, prevent wear and tear on the vehicle interior, can effectively prevent rain, ice, snow, and sand from staining the interior, and also has a sound insulation function. There is no explicit law regarding the material and use of the mats. However, accidents that affect the work of the car brake pedal due to the displacement and improper installation of the foot pad have occurred from time to time.

So how do you install and use the mat correctly?

1. The foot pad cannot be used upside down.

The material of some mats is more special, so that the front and back sides are almost the same, if you do not observe carefully, it is very likely that the front and back sides will be installed upside down, and the front and back sides of the mat are installed upside down not only will not play a role in protecting the interior, but also can not be fixed firmly, and serious will bring hidden dangers to driving safety.

If you buy a floor pad with similar materials on the front and back, we can judge the front and back according to the shape of the outer edge of the foot pad, usually there will be a rest pedal on the left side of the automatic transmission model, and the shape of the outer edge of the mat will change according to the rest pedal, so as to judge the front and back side has been tried and tested.

2. Choose a mat that matches the model.

If the foot pad is not fixed or improperly fixed, and the shape of the foot pad does not match the model, it will lead to the acceleration pedal being pressed by the foot pad and unable to spring back in time during driving, resulting in traffic accidents.

3. Ensure that the foot pad does not hinder the normal use of the pedal.

When installing the foot pad, it is necessary to ensure that the upper edge of the foot pad on the driver's side will not affect the normal use of the brake pedal and accelerator pedal.

4. Remember not to lay double floor mats.

In order to make it easier to clean, some car owners will lay two layers of floor mats. What may seem like a convenient act is actually tantamount to suicide, and the installation of a double layer of floor pads will cause the top layer of floor pads to shift. Because the mat is equipped with a fixture to the floor, and there is no fixture between the mat and the mat, the upper layer of mat is easy to shift, and only one layer of mat can be laid for driving safety.

5. Choose a mat with buckles and velcro.

Many cars have two or four small bumps on the floor, and these small bumps are the bolts that hold the mats in place. Usually the floor of the vehicle will be equipped with a fastening bolt, and it is also necessary to choose a product with the same device when buying a floor mat.

If the vehicle floor is not equipped with a fixing bolt device, you can choose a mat with Velcro when you buy it, and you only need to glue the Velcro to the interior floor when installing, and the effect is the same as that of fixing the bolt.

6. Fix the items in the car to prevent rolling.

In addition to choosing the right mat for proper installation, we also need to pay attention to items that are not fixed in the car, such as water bottles, fire extinguishers, steering wheel locks, etc., if these items are not fixed, they are likely to roll in the car during acceleration or sudden braking, and even get stuck under the brake pedal, causing serious accidents.

The quick installation method of the full-enveloping car mat can be easily done in 1 minute.

There is no need to apply floor glue, and the car chassis after applying floor glue.

It will not dissipate heat, and it is an environmentally friendly car interior part that integrates the five functions of water absorption, dust vacuuming, sound insulation and protection of the main carpet. Car mat is a car interior decoration, which protects the cleanliness of the car inside and outside, and plays a beautiful and comfortable role. Fully enclosed mats are fully enclosed mats for cars.

The fully enclosed car mat is developed on the basis of the large encirclement and is now the most popular car mat. There are two main types of fully enclosed mats on the market, fully enclosed wire ring mats and fully enclosed leather mats. Fully enclosed mats are high-end three-dimensional mats of different specifications and sizes designed according to different models, which can protect the suede of the car and prevent slip in 360 degrees without dead ends.

The floor mat must be an environmentally friendly car interior that integrates the five functions of water absorption, dust absorption, decontamination, sound insulation and protection of the main carpet. The mat is a kind of interior decoration that protects the cleanliness of the car and plays a beautiful and comfortable decorative role. The texture of the mat and the aesthetics of the pattern will directly affect the viewing effect and comfort in the car.

As a practical car item, car mats can effectively prevent water, dust, and slip, making them ideal for use in rainy and cold weather. Car mats, trunk mats, steering wheel covers, etc.

It is a must-have decoration for many car owners after buying a car, because car mats play a good role in helping car owners drive. The first is comfort. The cushioning effect of the foot pad between your feet and the parking area can reduce the shaking of your body when you drive.

So it's important to have a good foot pad. It's like if a person has an air cushion under his feet, his feet will be more stable and he will be more comfortable to drive; The second is safety, considering the material composition of the mat, the most important thing for this indicator is to consider its flame retardancy. Flame retardant is added to the floor pads.

It can effectively block the burning of open flames and cigarette butts; Qualified mats are very important for safety. Because the foot mat is a special car, a special size, suitable, to help the driver's feet drive the car safely and smoothly; In addition, because the mat material is environmentally friendly, after all, the space in the car is limited, and the owner must choose a product with no taste and ultra-low formaldehyde content when choosing a mat.

This minimizes the damage to the human body, and it contributes to the aesthetics of the cab. A good horse with a good saddle. Of course, your car needs a suitable high-end mat to decorate, so that it can be more beautiful.

Most of the domestic enterprises that produce mats are still family workshops, with small scale, weak capital and R&D capabilities, market anti-risk ability needs to be improved, brand awareness and integrated marketing promotion.

Generally insufficient. Car mats are mainly flat pads and fully enclosed pads. The flat car mat has the characteristics of easy to use, simple disassembly and low cost, but it is easy to slip and has poor waterproof and dustproof effect.

The fully enclosed floor mat adopts three-dimensional cutting technology to extend the protection range of the foot mat to the side of the body. The advantages of fully enclosed foot mats are that they are not easy to shift, have a good waterproof and dustproof effect, and have a more three-dimensional effect.

It is necessary. Because we usually always have a lot of dust, and will bring dust into the car, at this time must be covered with a full enveloping mat, which can isolate the dust, and it is especially easy to take care of.

There is no need to install this kind of all-around mat, because the most ordinary mats can also be placed, and the all-around mats are just a way for sellers to make money when buying a car, so there is no need to install them at all.

It is also necessary to install it, because with such a mat installed, you can protect your car well.

1. First of all, check the buckle position of the full-enveloping mat of your car, as shown in the figure below

2. Then put the mat into the car roughly correctly, as shown in the figure below

3. Align the position of the first buckle, as shown in the figure below

4. Press the first buckle tightly, as shown in the figure below

5. Align the position of the second buckle, as shown in the figure below

6. Press the second buckle tightly, as shown in the figure below

7. Finally, tighten the foot pad, and the installation of the full surrounding foot pad is completed, as shown in the following figure:

Correctly distinguish the position of the mat according to the size and size, and just lay it directly. After snapping the clips in each place and fixing them, the installation is basically complete.

Full Wrap Car Mat Installation Tips:

1.According to the model, choose the right one full envelopment car mat, after getting the mat, you need to dry it for about a day, it is in a cool and ventilated place to dry, not exposed to the sun.

2.Then it is time to install the mat, in fact, the installation of the mat is very simple, you can refer to the worn mat for installation, clamp the clips in various places, and after fixing, the installation is basically completed.

3.If it affects the brake, throttle, and has been clutched, you can simply check it, if it is not affected, which full envelopment mat will be installed.

Full Wrap Car Mat Cleaning and Maintenance:

1.Once the mat is installed, it needs to be cleaned and maintained simply. There are many ways to maintain daily maintenance, and they are relatively simple and effective. For example, use a damp rag to make a simple wipe.

2.If it is a rainy day, you can do a simple drying, which can also extend the life of the mat.

3.However, no matter how to maintain, it is inevitable that the mat will be worn, so if the mat is worn, it needs to be replaced with a new one.

The quick installation method of the full-enveloping car mat can be easily done in 1 minute.

Directly paved on the paving on the paving on it! By the way, don't forget to distinguish the position of each mat.

1. First of all, check the buckle position of your car mat, as shown in the figure below

2. Then put the mat into the car roughly correctly, as shown in the figure below

3. Align the position of the first buckle, as shown in the figure below

4. Press the first buckle tightly, as shown in the figure below

5. Align the position of the second buckle, as shown in the figure below

6. Press the second buckle tightly, as shown in the figure below

7. Finally, tighten the foot pad, and the installation is completed, as shown in the figure below

The buckle of the full-enveloping mat is nailed on when it is produced, if your mat is not buckled, it is recommended to find a merchant to repair it. With the buckle directly attached to the bottom and across the bridge, the Asian elephant wraps around the car mat to provide more services.

1. First of all, check the buckle position of the full-enveloping mat of your car, as shown in the figure below

2. Then put the mat into the car roughly correctly, as shown in the figure below

3. Align the position of the first buckle, as shown in the figure below

4. Press the first buckle tightly, as shown in the figure below

5. Align the position of the second buckle, as shown in the figure below

6. Press the second buckle tightly, as shown in the figure below

7. Finally, tighten the foot pad, and the installation of the full surrounding foot pad is completed, as shown in the following figure:

The installation of the full envelopment mat is still more troublesome, not only put it in the car, but also need to disassemble the front two seats, and it is best to hand over the poor hands-on ability to a professional auto repair shop. The all-encompassing mat is still very popular with everyone and is worth installing.

Car mat is an indispensable configuration in almost every car interior device, full wrap is a type, car mat is used to prevent wear and tear on the sole of the foot interior, the dirt and dirt, ice, snow, dust from the bottom of the foot, and locked inside the foot mat. At the same time, it has a sound insulation function and must be made of flame retardant materials. At present, the more popular ones are the full-wrap wire hoop mat and the full-wrap leather mat.

The full-enveloping floor mat is a high-side three-dimensional floor mat designed with different specifications and sizes according to different models, which can protect the suede of the car and 360° anti-slip without dead ends.

Full envelopment of the mats. A three-dimensional mat with a higher side than ordinary 3D, generally speaking, its height is about 11cm higher than that of ordinary 3D mats, which can better protect the suede under the car, and at the same time, it is more firm because of the increase in friction area, and it is not easy to slide. Nowadays, it is very inconvenient to install floor glue in many cars, and the seats of the whole car need to be removed when installing floor glue.

The weight of the full envelope leather mat is not the lighter the better, the full envelope leather mat is of course not the heavier the better, the full envelope leather mat is mainly based on its material, the material of the full envelope leather mat is different, the weight of the full envelope leather mat is also different, and the wear resistance and their respective characteristics and functions are different. For example, the full-wrap leather mats on the market PVC full-wrap leather mats are relatively bulky and suitable for the best. There are a total of 5 layers of better mats, and the materials used in each layer must be genuine.

Photo by Yang Weilin of Pacific Automobile Network).

The installation steps and methods of car floor mats are as follows:1. First, special vehicles use special floor mats;

Many car owners do not pay much attention to the choice of car mats, thinking that car mats are not very important, as long as they can be used. What's more, the car mat is damaged and still in use. In fact, each car should choose the corresponding mat, because the fit of the mat is very important, only the mat that fits the vehicle can ensure the safety of the owner during driving.

2.Second, check if the foot pad is stuck on the brake clutch throttle.

Many car accidents or car collisions are caused by car mats. Many times, car mats slip and accumulate at the brakes, resulting in brake failures. The pad is stuck in the brakes and cannot be braked; This kind of news is not uncommon.

Therefore, when installing the mats, car owners should pay attention to whether our mats are correctly installed at the brake throttle. If the mat does not fit properly or is piling up at the throttle, the car mat should be replaced immediately.

3.Finally, secure the foot pad with a buckle.

Foot pad fixation is an important operation. Many novices will forget this operation, or just put the mat in the car for convenience, thinking that the car is too narrow, and there will not be much movement if the mat is not fixed. In fact, this idea is wrong, because the deformation and movement of the car mat will have an impact on the owner's braking operation.

Therefore, when choosing a foot pad, be sure to choose one with a safety buckle.

Precautions for the installation of car floor mats.

1.If the mat is damaged, uneven or deformed, it should be replaced in time;

2.After the mat was installed, the stain was not cleaned in time;

3.The foot pad must be fastened with a snap;

4.At present, car mat manufacturers not only consider the durability and wear resistance of the mat, but also show their own personality in the design of the mat from the perspective of the owner, which is different from the boring monotony of the traditional mat. Choose more environmentally friendly degradable secondary raw materials; In the field of design, R&D and manufacturing of car mats, there are many brands such as:

Apple Car. They are always striving for perfection and constantly challenging and breaking through themselves. @2019