-
Anonymous users2024-02-06** If you don't understand the letter, look for the manual.
-
Anonymous users2024-02-05Summary. How to change the external chuck pattern of FANUC OI-TD CNC lathe back to the inner clamp mode.
Knife Complement (turn to the right about 2 pages) to operate, select the fourth option that starts with ch. Change the status to On. After the selection is completed, press the slag ESC + manual + chip removal device at the same time, and the three keyboards will be set successfully.
You can use it as a reference. Hopefully, my reply will be helpful to you Miyano Turn-Mill Composite.
The above is how to do it, you can try it, but it is recommended that you find a professional to debug it.
What the answer. Change back to the operation of the inner clamp mode: knife supplement key (turn to the right about 2 pages) to operate and select the fourth option at the beginning of ch.
Change the status to ON or Pure. After the selection is completed, press the Hui at the same time to sell the ESC+Manual + Chip Conveyor Stop, and the three keyboards are set successfully.
I'm talking about Miyano CNC lathes.
There is no chip conveyor.
-
Anonymous users2024-02-04After the offset button is pressed twice, the parameter protection lock will appear, and the parameter can be modified when it is changed to 1, and the parameter cannot be modified by 0.
For OI-C system: press the System key, press the [ soft key several times, when the [PMCPRM] soft key appears, press this key, press the [Holding Relay] soft key, then you can find the K parameter to be changed and modify.
-
Anonymous users2024-02-03You're asking about the K parameter in PMC.
-
Anonymous users2024-02-02Specifically, what's the use of setting k, what do you want to set it to?
-
Anonymous users2024-02-01The standard panels of FANUC-0i system milling machines, lathes, and horizontal machining centers are as follows:
1. Control panel description: the upper left area is the CRT display, the upper right area is the MDI keyboard area, the lower left area is the status display area, and the lower right area is the manual adjustment area.
2. Functions and roles of each district:
A. CRT display screen is used to display all the information that needs to be displayed, B. MDI keyboard area is used for program, parameter input, etc., C. The indicator light of the status display area shows the controlled position, controlled status and other information, and D. The manual adjustment area is used to manually control the start and stop of the machine tool, return to the reference point, tool setting, etc.
-
Anonymous users2024-01-31That is, you need an operation manual, it has been sent, please check.
-
Anonymous users2024-01-30Summary. Press the "Cancel" and "N" keys on the position interface, then on the MDI mode, then switch in the tool patch, find the number of parts to be machined, and press enter after modification.
The operation panel of the CNC machine tool is an important component of the CNC machine tool, and it is a tool for the operator to interact with the CNC machine tool (system), which is mainly composed of display device, NC keyboard, MCP, status light, handheld unit and other parts. There are many types of CNC lathes and CNC systems, and the operation panels designed by various manufacturers are also different, but the basic functions and usage methods of various knobs, buttons and keyboards in the operation panel are basically the same. This entry "Operation Key Word Translation" takes the FANUC system and the Guangshu system as an example, and briefly introduces the basic functions and usage methods of each button on the operation panel of the CNC machine tool.
First hit on the MDI mode, then switch in the tool patch, find the number of processed parts, and press enter after modification.
How to change the number of processed parts on the control panel of the Franken system CNC lathe.
Press the "Cancel" and "N" keys on the position interface, then on the MDI mode, then switch in the tool patch, find the number of parts to be machined, and press enter after modification. The operation panel of the CNC machine tool is an important component of the CNC machine tool, and it is a tool for the operator to interact with the CNC machine tool (system), which is mainly composed of display device, NC keyboard, MCP, status light, handheld unit and other parts. There are many types of CNC lathes and CNC systems, and the operation panels designed by various manufacturers are also different, but the basic functions and usage methods of various knobs, buttons and keyboards in the operation panel are basically the same.
This entry "Operation Key Word Translation" takes the FANUC system and the Guangshu system as an example, and briefly introduces the basic functions and usage methods of each button on the operation panel of the CNC machine tool. First hit on the MDI mode, then switch in the tool patch, find the number of processed parts, and press enter after modification.
It came out of a hand-held box, and then what to do?
The version may not be the same, you should contact the maintenance personnel directly.
See the version in **.
My computer. There's really enough to catch.
1. How to operate.
Cut the end face and outer circle of the workpiece with one knife (the end face is flat, and the outer circle is turned), then measure the diameter of the outer circle d, and change the roughing thread cutter to cut the thread. Here's how: >>>More
The machining center has more Y-axes than CNC lathes, and CNC lathes only have X, Z axes.
Friends must be cautious, time is the most important, why junior high school students? Because junior high school students are easy to cheat with their money. >>>More
CNC boring and milling machine is generally a relatively large equipment, and horizontal machining center is the same reason, the current production of CNC boring and milling machine and machining center can basically be universal, but in the processing parts boring machine is limited by relatively little, As for programming, the boring machine is generally fed per revolution when drilling, and the machining center is generally fed per minute. Because the centripetal force of the boring and milling machine is better, the ram can stretch out very long, and it is generally used to process hole parts with high precision and relatively large volume, and the ram of the boring and milling machine is relatively stable. The machining surface accuracy is relatively high, and a good machining center can basically achieve it.