What kind of brick is the lightest in construction, and how many types of building bricks are there?

The lightest brick in the building is the lightweight brick.

Lightweight bricks generally refer to foam bricks.

This kind of brick is used for normal indoor partition walls, which effectively reduces the load on the floor and has a good sound insulation effect.

The strength products are made of high-quality tabular corundum and mullite.

For aggregate, sillimanite composite as the matrix, with special additives and a small amount of rare earth oxide mixing, high-pressure molding, high-temperature firing.

Ordinary lightweight insulating refractory bricks.

The materials produced are clay, high-alumina high-strength drifting bricks, low-iron mullite, high-alumina polylight thermal insulation refractory bricks, and diatomaceous earth.

Insulating refractory bricks.

Clay solid sintered bricks, clay hollow sintered bricks, fly ash aerated concrete blocks, fly ash hollow bricks are often used in construction. If the weight is compared with the same volume, the fly ash aerated concrete block is the lightest. Answer supplement Fly ash aerated concrete block is mixed with fly ash and cement produced by coal burning in thermal power plants, and then add chemical additives that can produce a large number of bubbles, produce a lot of foam in the mixing process, increase the heat preservation of the block and reduce the weight of the block, a block is equivalent to the volume of more than a dozen ordinary clay bricks, in high-rise buildings can significantly reduce the weight of the building, heat preservation and compression resistance are much better than clay bricks.

The lightest in the building is the lightweight brick, but many people don't know the real name of the lightweight brick, it is the foam brick, it is a black brick, the inside is like a foam-like void, foam brick can only be used in the full frame structure, can not bear the load.

Autoclaved fly ash aerated concrete blocks.

The lightest brick in the building is the lightweight brick.

Lightweight bricks generally refer to foam bricks, which are used for normal indoor partition walls, which effectively reduces the load on the floor and has a good sound insulation effect.

The strength products are made of high-quality tabular corundum and mullite as aggregates, with sillimanite composite as the matrix, and special additives and a small amount of rare earth oxides are added to mix, which are formed by high pressure and fired at high temperature.

The materials produced by ordinary lightweight insulated refractory bricks include clay, high-alumina high-strength drifting bricks, low-iron mullite, high-alumina polylight insulating refractory bricks, and diatomaceous earth insulating refractory bricks.

Lightweight brick companies: Henan Asia Refractory Materials, Foshan Runhe Building Materials, Jiangsu Aishang New Material Technology, Xingtai Yushen New Building Materials, Anhui Zhuoke Construction.

Henan Province Asia Refractory ****:The registered address is located in the second group of Shengdimiao Village, Chaohua Town, Xinmi City, the registration authority is the Xinmi City Market Supervision and Administration Bureau, and the legal representative is Guo Zhanjun, and the business scope includes the production and sales of stereotyped and unshaped refractories; Kiln engineering design and construction; refractory and kiln technical consulting services; Sales of kiln engineering equipment and metal fittings.

Foshan Runhe Building Materials****:The registered address is located in No. 1, the first floor of No. 3, Lane 6, Oushui Village, Fuhu, Yundonghai Street, Sanshui District, Foshan City, the registration authority is the Market Supervision and Administration Bureau of Sanshui District, Foshan City, and the legal representative is Lin Zejiang, and the business scope includes sales: building materials, autoclaved aerated concrete blocks, lightweight bricks, cement, decorative materials, chemical products, and ceramic products.

Jiangsu Aishang New Material Technology ****:The registered address is located in Room B02-9, 3rd Floor, Podium, Changfeng Building, No. 14 Xinghuo Road, Jiangbei New District, Nanjing, the registration authority is the Administrative Examination and Approval Bureau of the Management Committee of Jiangbei New District, Nanjing, and the legal representative is Chen Generous, and the business scope includes the research and development and sales of building materials; R&D of new environmentally friendly building materials: concrete plates, concrete products, light steel keels, insulation materials.

Xingtai Yushen new building materials ****:The registered address is located in the east of Zhijiazhuang Village, Wuguodian Township, Neiqiu County, the registration authority is the Neiqiu County Industrial and Commercial Bureau, the legal representative is intellectual, and the business scope includes the production and sales of building wall insulation, heat insulation, wall decoration materials, waterproofing, anti-corrosion, leakage plugging and grouting materials; Thermal insulation and waterproofing construction services. sales and installation of elevator products; Engineering information services.

Anhui Zhuoke Architecture****:The registered address is located in Room 1301, Minggui Building, Guangning Road, Taozhou Town, Guangde, Anhui Province, the registration authority is Guangde Market Supervision and Administration Bureau, and the legal representative is Huang Jing, whose business scope includes undertaking construction engineering, architectural decoration engineering, landscape engineering, mechanical and electrical equipment installation engineering, security engineering, earthwork engineering, steel structure engineering, and hydropower installation engineering.

1. Sintered ordinary bricks.

The national standard GB5101-2003 "Sintered Ordinary Bricks" stipulates that all bricks with clay, shale, gangue and fly ash as the main raw materials, and solid or porosity of no more than 15% are formed and roasted, which are called sintered ordinary bricks.

Sintered ordinary bricks are divided into sintered clay bricks, sintered shale bricks, sintered coal gangue bricks, sintered fly ash bricks, etc. The usual size is 40mm, 115mm, 53mm (sintered perforated bricks).

2. Sintered perforated bricks.

Clay, shale, coal gangue, fly ash, silt (river and lake silt) and other solid wastes are the main raw materials, which are mainly roasted and mainly used in the load-bearing parts of buildings.

3. Autoclaved lime sand bricks.

Autoclaved sand-lime bricks are suitable for the interior and exterior walls of various civil buildings, public buildings and industrial plants, as well as the foundation of houses. It is a product that replaces sintered clay bricks. Autoclaved lime sand bricks are made of lime and quartz sand, sand or fine sandstone in appropriate proportions, which are finely ground, mixed with water, semi-dry pressed and cured by autoclaving.

Fourth, fly ash bricks.

The main raw materials of fly ash bricks are fly ash, lime, gypsum, calcium carbide slag, calcium carbide mud and other industrial waste solid substances.

5. Small concrete hollow blocks.

Concrete small hollow block is a block material with a certain hollow rate made of cement as cementitious material, adding sand and gravel as aggregate, metering and batching, water stirring, vibration pressure molding, and curing.

6. Light aggregate concrete small hollow blocks.

Lightweight aggregate concrete small hollow block is a lightweight wall material made of cement and lightweight aggregate as the main raw material, mixed into a lightweight aggregate concrete mixture according to a certain mix ratio, and formed by a block forming machine and properly cured.

7. Hollow bricks.

Hollow bricks are divided into cement hollow bricks, clay hollow bricks, and shale hollow bricks.

8. Autoclaved aerated concrete blocks.

Autoclaved aerated concrete block is a porous silicate block made of calcareous materials (such as cement, lime) and siliceous materials (such as sand, fly ash, slag) with aluminum powder as aerated agent, stirred with water, poured and formed, gassed and expanded, pre-cured and cut, and then cured by high-pressure steam.

General common cement brick specifications:

240*115*55 standard bricks (similar to small red bricks).

390*190*190 hollow brick (two holes).

Hollow brick (four holes).

Single-row hole blocks.

Eight-hole brick 240*115*90

Seven-inch brick 180*115*90

The specifications of colored bricks and general grass bricks are as follows:

400*400, 400*200, 240*180*90, 300*300, 600*400, for automatic brick laying machine.

800*400 etc.

The specifications of the curb bricks are as follows:

500*350*350, 1000*300*120, 500*500*200, 800*300*120, 600*500*300, etc.

Standard hollow brick specifications:

390mm×190mm×190mm、240mm×115mm×90mm、

240mm×115mm×53mm

Generally speaking, most of the wall tiles are ceramic bricks with a water absorption rate of more than 10%, so they are lightweight.

Whereas, floor tiles are usually polished tiles or antique tiles. Polished bricks are porcelain bricks with water absorption, and antique bricks are better porcelain tiles, so there are generally stoneware bricks with a water absorption rate of 3-6%. Because it is dense, it is heavier.

However, it cannot be generalized now, and there will also be some high-end places that use cut polished tiles or antique bricks to pave the wall, so it cannot be generalized that wall tiles are lighter than floor tiles.

The key depends on what material you choose to make ceramic tiles.

Generally speaking, if the polished tile is not 300*600 specifications, most of them need to be cut and processed, and there are special ones for this line.

In recent years, the more common sizes produced by wall tile manufacturers are 300*450mm, 300*600mm, and the smaller ones are 300*300.

Hope it helps.

It depends on the manufacturer, some manufacturers have that specification and some don't.

For construction projects, a large number of bricks need to be used when building in some places, and we also know that there are many types of bricks, so it is important to understand what bricks to use in what projects, which is very important for the safety of buildings. Let's take a look at how many types of building bricks there are? For construction projects, a large number of bricks need to be used when building in some places, and we also know that there are many types of bricks, so it is important to understand what bricks to use in what projects, which is very important for the safety of buildings.

Let's take a look at how many types of building bricks there are? How to choose building bricks? Hopefully, these introductions can help you better.

How many types of building bricks are there?

Ordinary clay bricks (machine red bricks), shale bricks, hollow bricks, aerated concrete blocks, Wusha ceramsite hollow bricks. Red bricks are used for foundations, stoves, chimneys, pools, etc., which have freeze-thaw cycles; Aerated concrete blocks, frame structures, infill walls with frame shear structures, and partition walls without load-bearing.

How to choose building bricks?

Step: Decide on the style.

Before choosing tiles, we must first examine the design style of the room, according to the lighting intensity of the room, the size of the area, and then decide to choose the color and pattern of the tile.

Step 2: Market inquiry.

When you have nothing to do, go to the building materials market to collect the promotional materials of various manufacturers and say hello. If there is an exhibition, ** activities, do not miss the opportunity, at this time you can get free information and provide consulting services, and the resources are sufficient, the variety is complete, the quality is generally better, there is room for selection, and the purchase of bricks can also get certain discounts.

Step 3: Consultation with experts.

Consult with experts, experts, and users who buy ceramic tiles, summarize various experiences, compare and select from them, summarize the lessons of others, and find out the brand that you are satisfied with.

Step 4: Look at the brand.

Because the brand represents the comprehensive strength of the company's products, it includes the connotation of technology, quality and service. Consumers must choose products with good reputation and high credibility when purchasing products. In addition, the building materials market is a place where all kinds of tiles gather, to buy ceramic tiles in the building materials market, the quality is more excellent.

However, it also depends on the credibility of the building materials market and the management standard model, the bigger the better.

Step 5: Look at the service.

Generally speaking, large companies and enterprises have strong pre-sale, in-sale and after-sales service capabilities, and they are trustworthy and re-promised.

The above is about "How many types of building bricks are there?" How to choose building bricks", I hope this introduction can help you choose a more suitable brick. We all know that the quality of bricks is directly related to the quality of the project, so the choice must be cautious, is to understand which brick type is suitable for what kind of project, which is not only related to the quality of the project, but also related to the life safety of the occupants.