Dimensions of ground sockets, standard socket sizes

There are many types of ground sockets, among which the size of the pop-up ground socket: 120*120mm, the size of the open ground socket: 146*146*4mm, and the size of the spiral ground socket: 130mm*130.

Sliding Ground Socket Size: The common module of the 120* type is based on the standard of 1 3, that is, three 1 3 standard modules can be installed on a vertically mounted standard 120mm 74mm panel. Modules are divided into three types according to size.

The common module of the 118 type is based on the 1 2 standard, that is, two 1 2 standard modules can be installed on a horizontal standard 118mm 74mm panel. Modules are divided into two types according to size. In the actual installation and use, the 120 type and 118 modules have a tendency to gradually become universal, and one panel can be equipped with three standard 1 3 modules and two 1 2 modules.

1. Spring-up ground socket.

The open ground plug adopts a figure-eight paddle, which is easy to open. The overall curved panel is very beautiful. The front and rear screws of the upper cover are fixed for a firmer look.

2. Open ground socket.

The plug can be covered together with the plug, leaving only the plug wire at the wire opening, which is convenient for passage and cleaning. Side-plug products are especially suitable for strong and weak current to be installed together, which can meet the different needs of customers.

3. Spiral ground socket.

A truly waterproof ground socket is the best choice for installing a weak current module. It's very easy to turn on. With horizontal fine-tuning height increase device, it will not be unable to install the surface copper cover due to the skewed or too deep embedded bottom box.

4. Sliding ground socket.

Press the button and the upper cover will automatically push forward and pop open. When in use, it will not cause mixing feet due to the opening of the upper lid. The hidden danger of accidents is eliminated.

It adopts the U series functional parts, which can be equipped with four-position three-plug multi-function, and can also be installed with six-position computer modules. The bottom weak current end can be shielded with a stainless steel cover, and it is particularly ideal to install strong and weak current together.

5. Hidden ground socket: functional parts can be combined arbitrarily.

Different subjects have different standards for getting off the ground. Installation location of the socket:

1.Generally, the lower edge of the socket should be meters away from the ground and installed at the same height, and the difference should not exceed 5mm.

2.The distance between each wall and two sockets in the living room and bedroom should not be higher than meters.

3.The washing machine socket is between meters and meters from the ground, and it is best to choose a three-pole socket with a switch.

4.The refrigerator socket is meters or meters from the ground (depending on the location of the refrigerator).

5.Split-type, wall-mounted air conditioning sockets should be set up at a distance from the ground according to the location of the reserved hole in the outlet pipe, window-type air conditioning sockets can be set up at a distance from the ground next to the window, and the power sockets of cabinet air conditioners should be set at a distance from the ground at the corresponding position.

6.The range hood socket should be installed at a height of 2 meters from the ground according to the kitchen cabinet design.

7.The socket of the electric water heater should be installed on the right side of the water heater at a distance from the ground, and be careful not to set the socket above the electric heater.

8.Terrace sockets should be more than one meter away from the ground, and avoid sunlight and rain as much as possible.

9.Power sockets for hair dryers and shaving can be set up next to the basin mirror, and it is advisable to stay meters off the ground.

At present, there are 5 main series of switches and sockets in the domestic market: 75 type, 86 type, 118 type, 120 type, and 146 type. Among them, the 86 type is the standard switch panel size in China, with a length of 86 mm, a width of 86 mm, and a mounting hole spacing of 60 mm

Specification. The size of the switch 75 type socket is: length * width = 75 * 75mm.

It is a model that was used a lot in the early days, and now it is rare on the market except for some special fields that will be used. If it is a household socket selection, it is recommended to consider carefully, and it will be more troublesome to replace the configuration in the later stage.

Specification. The size of the switch 86 type socket is: length * width = 86 * 86mm, and the installation hole spacing is 60mm.

It is the standard switch panel size in China, the widest range of application, and the use is also relatively widespread, and the current domestic home building materials market is basically this specification. Its biggest advantage is that it can be fixed to the wall with double-sided tape or screws, which is not easy to lose and is simple and beautiful.

Specification. The size of the switch 118 socket is: length * width = 118 * 78mm, and the installation hole spacing is: , which is a horizontal design.

Switch 118 type is a representative of the freely combined socket switch panel, and there are three types of back boxes: single-link, medium-sized, and long.

Specification. The size of the switch 120 socket is: length * width = 120 * 78mm, and the installation hole spacing is: , which is a vertical design.

In addition, the 120 specification series also has two sizes, one is small: 70*120mm; One is a large duplex type: 120mm*120mm, which is also a vertical design.

Specification. The size of the switch 146 type socket is: length * width = 86 * 146mm, and the installation hole spacing is:.

The size of the 146 gauge 6 type socket body is relatively large, which is an extension of the 86 type, and it is often seen in the decoration.

The size of the socket will vary depending on the standard and may vary in different countries or regions.

In China, the common socket size is 86 86 mm, and some sizes will roll slightly different, for example, the import socket may be slightly smaller. The size of the general socket is about 80mm in length and width, and about 25mm in thickness. In order to adapt to different electrical appliances, the socket will also have different socket holes.

In Europe and Australia, the common socket size is 57 57 mm or 60 60 mm, but there are also some different sizes such as 120 70 mm. In addition, the plugs commonly used in Europe are also different from those in China, with two large auspicious round pins, while in China they have three flat pins.

The size of the socket varies greatly from country to country. In Zhongchong Biguo, the general socket size is 86mmx86mm. In Europe, socket sizes are 55mmx55mm or 71mmx71mm.

In the United States, the socket size is 114mmx70mm. Different socket sizes also affect the size of the openings in the wall.

The general size of the socket is 86*86 mm, and the thickness is 27 mm, which is the standard size in most countries and regions. Of course, different countries and regions also have different socket sizes and types, such as three-pin plugs in the United Kingdom and two-pin plugs in the United States. Before renovating, it is best to understand the socket standards in your area at the latest, so that you can carry out the correct layout and purchase the appropriate switch socket panel.