-
Principle of square and side parking of semi-trailers.
1. The semi-trailer is side by side with the adjacent car.
Confirm that you are about 1 meter away from your neighbor vehicle, reverse in a straight line after confirming that the rear is safe, and stop going backwards when the rear bumper of the vehicle is side by side.
2. Turn the steering wheel right and reverse to the target position.
When the vehicle is stopped, turn the steering wheel to the right all the way; Relax the brake pedal slightly and reverse with the semi-trailer creep function. The left side of the car stops when it reaches the straight line of point A.
3. Turn the steering wheel left to make the tires return to the right and reverse.
When the vehicle is stopped, turn the steering wheel to return the tires to the center; Slowly reverse in a straight line, and stop going backwards when the left rear wheel reaches the white line on the outside of the parking space.
4. Move the car closer to the right.
Turn the steering wheel of the semi-trailer to the left and slowly retreat; Before the vehicle is parallel to the shoulder, turn the direction to turn the vehicle back to the right, stopping the vehicle parallel to the shoulder. Be careful not to collide with the vehicle behind you. Semi-trailers are large vehicles, and it is important to be careful when parking.
Semi-trailer square and side parking practice method:
1. Fix the parking position of motor vehicles. Use chalk or stone pen to draw a "T" line perpendicular to the ground in the epitaxial center of each wheel of the motor vehicle.
2. Fixed the parking position of non-motor vehicles. After an accident of a non-motor vehicle, it generally falls to a certain side, and half an arc line can be drawn along the outer edge of its wheel, and the front wheel and rear wheel are indicated with the words "front" and "rear" respectively outside the arc line.
3. Fix the brake marks. Generally, at the starting point of a certain brake mark, the starting point and width of the impression can be outlined with a " " profile.
4. Fix the scratches. When a non-motorized vehicle falls to the ground, it generally leaves a strip mark on the ground caused by the pedal head or wheel axle head and the ground, and we only need to draw a strip line along the visible trace from the beginning to the end.
5. Fix the position where the human body falls to the ground. In some accidents, cyclists or pedestrians will lie on the ground after an accident, and it is best to sketch out the position of their head and feet before organizing a rescue. Here's a tip:
If the degree of injury is more than minor, it is best not to "go private" and should immediately report to the police.
-
The spring tide brings rain and comes in a hurry, and the wild ferry is unmanned and self-controlled.
-
Tips for half-mounted side parking.
-
Tips for side parking.
-
<>1.Semi-trailer and adjacent car side by side, determine the distance from the adjacent car about 1 meter, determine the safety after the parallel line reverse, when the vehicle bumper is parallel, stop degeneration.
2.Turn the steering wheel right, reverse to the target position, and when the vehicle is stopped, hit the steering wheel to the right; Slightly release the pressure brake pedal and use the intestinal peristalsis of the semi-trailer to carry out reversing. The left side of the car body stops when it reaches the widening parallel line at point A.
3.Turn the steering wheel left, make the tire right garage and reverse, in the case of the vehicle stop, rotate the steering wheel to make the tire right garage; Slowly reverse in parallel lines, and stop deterioration when the left rear tire is in a line on both sides of the parking space.
4.Move the car to the right, hit the steering wheel of the semi-trailer to the left, and slowly degenerate; Before the vehicle is parallel to the dirt shoulder, rotate the orientation so that the vehicle is in the right garage and stop the vehicle at a position parallel to the dirt shoulder. Be careful not to collide with the back of the car.
Semi-trailers belong to large and medium-sized vehicles, and it is important to be careful of collisions when parking.
5.The total length of the parking space necessary for longitudinal parking is about twice the total length of the car body. Just remember where the vehicle stopped and where it will move next, and you can park your car exactly in the parking space.
1.Fixed parking position for motor vehicles. Use a pencil or stone pen to draw a "T" line on the vertical bisecting pavement in the epitaxial center of each wheel of the motor vehicle.
2.Fixed non-motorized lane parking position. After the safety accident of the non-motorized lane, it is generally fallen to a certain side, and most of the arc line can be drawn along the side of the wheel, and at the same time, the "front" is used outside the arc lineThe word "rear" indicates its front and rear tires.
3.Fixed brake system scratches. Generally, at the starting point of a certain braking system scratch, the starting point and total width of the scratch can be outlined with a " " profile.
4.Fixed scratches. When a non-motorized lane falls, there will generally be a strip mark on the floor caused by the pedal head or the axle of the bridge and the road surface, and you only need to draw a strip line along the starting point of the visible mark to the end station.
5.Immobilize the position where the body has fallen. In some safety accidents, cyclists or non-motorized vehicles will lie on the road after a safety accident, and it is best to outline the position of the top of their head and feet before we treat them in the institution.
-
A good technique is to observe the curb on the side of the road, judge the length of the vehicle, judge the parking space, find the corresponding angle, and then kill the steering wheel, so that you can park the car in it.
-
It is necessary to understand the point of side parking, pay attention to the method of parking, also pay attention to the skills, but also pay attention to the dangerous situation in the rear, control the speed, and the speed should not be too fast.
-
We must pay attention to discipline, but also pay attention to the safety line, when reversing, pay attention to the control of the steering wheel, master the method of reversing, and control the speed.
-
1. In the state of vehicle stopping, the battle on the right side of the steering wheel; Slightly release the brake pedal, and the semi-trailer peristaltic function supports Bipila. On the left side of the body, an extension cord is stopped.
2. Confirm that the distance between the adjacent car and the adjacent car is about 1 meter, after confirming the safety, the rear straight back, when the vehicle hand slides the rear bumper side by side, to prevent the change of grip.
3. The semi-trailer hits the left side of the steering wheel and slowly degrades; In the vehicle parallel to the shoulder, rotate the direction so that the vehicle, the vehicle stops in a position parallel to the shoulder. Not paying attention after a car accident. The semi-trailer is a large vehicle and parking must be very important.
4. In the state of vehicle stopping, rotate the wheel to make the rear tire; Slowly move backwards, with a white line on the side of the parking lot on the left rear wheel, to prevent degeneration.
Tips: Semi-trailer dump truck and adjacent car side by side confirm that the distance between the adjacent car is about 1 meter, confirm the safety of the rear and reverse in a straight line, when the rear bumper of the vehicle side by side, stop. When reversing, the direction is reversed, to play slowly and slowly, the amplitude is not too large, the eyes and ears are not in all directions, do not panic.
-
1. Fixed-point parking on the uphill road: (1) Before the uphill socks are lost, make the car lean to the right side of the road, within the sideline; (2) Properly rush the slope before going uphill, and relax the accelerator pedal when it is 20m away from the pile; (3) Step on the clutch pedal first, and then lightly press the brake pedal to make the car slowly approach the stop sign lever; (4) Visually inspect the target, align the stop sign lever with a certain calibration point of the front windshield or front cover, and then press the brake pedal hard to stop the car smoothly.
2. Ramp start: (1) Turn on the left turn signal. (2) Step on the clutch pedal, put on low gear, hold the parking brake lever with your right hand and press the button, ready to relax.
3) Depending on the slope, step on the accelerator pedal moderately, and at the same time loosen the clutch pedal to the semi-linkage. (4) When the engine sound changes and the body shakes, relax the parking brake lever, then slowly step on the accelerator pedal, and gradually release the clutch pedal to make the car start.
It is easier to park at a fixed point, hit the right turn signal, look at the right rearview mirror, determine the safety, lightly hit the direction of the hole to the right, and so on to see the sudden starting point of the right wiper and the curb stone, slightly to the left to play a little direction, and then slide forward to the parking point on the road, to ensure that 30-50 cm from the right side of the road.
-
1. Hang the reverse gear, look at the right rearview mirror, the right rear wheel reaches the sideline, and hit the direction to the right.
2. Control the speed, look at the left rearview mirror to expose the right corner of the bottom of the library, return to the steering wheel, and continue to reverse.
3. Look at the rearview mirror wheel line, hit the direction on the left, and put the wheel straight.
After parking, the narrow road turns out, and the body goes around the garage dotted line 1st gear to make the car good. Head with hanging about 165 degrees.
Start reversing, look at the right rear vision, when the right rear corner of the trailer is aligned with the right rear corner of the garage, hit the right direction to turn the body straight and continue to reverse.
When the trailer right rear tire is close to the garage dotted line, hit half a circle to the left, when the left rear wheel of the trailer is close to the garage dotted line, hit the direction of the garage to the right, and the body returns to the right after the garage.
-
Answer 1, when the trailer is reversing, try to choose to reverse from the left side, and in the process of reversing, you should first look at the back, and then pay attention to the rearview mirrors on both sides. The lateral distance on the right side is greater than on the left.
2. The speed in reversing is mainly idling, and the body is corrected in time. Because the turning radius of the front wheels is larger than that of the rear wheels, the front of the car will be thrown outward when reversing, and it is easy to scratch on the right side if you do not pay attention to this.
3. When reversing, try to turn the front of the car towards a place with an open line of sight and room for maneuver to facilitate the observation of dynamic people or cars. Do not reverse in places where reversing is not allowed in traffic rules to prevent accidents.
-
Find the point of semi-hanging side storage.
-
fixed motor vehicle parking position;
Fix the position of the non-motorized vehicle and the position of the car reversing;
Relax the brake pedal slightly and reverse with the semi-trailer creep function.
Hit the half-mounted steering wheel to the left to the bottom and fix the scratches;
fixed brake imprints;
1. Fix the position of the motor vehicle, and use chalk or stone pen to outline the "T" shape line perpendicular to the ground in the epitaxial center of each wheel of the motor vehicle;
2. Fix the position of the non-motor vehicle and the position of the car reversing, in some accidents, turn the steering wheel left, reverse in a straight line after confirming the safety of the rear, and turn the direction to make the vehicle right, it is best to outline the position of its head and feet;
3. Relax the brake pedal slightly, and use the semi-trailer peristaltic function to reverse. The left side of the body reaches the straight line of point A, stop to rest or change the drive, after all, life is more important than everything, the word "rear" indicates its front and rear wheels, you must pay attention to safety, and the car will be close to the right;
4. Hit the half-mounted steering wheel to the left to the end and fix the scratches. When a non-motorized vehicle falls to the ground, it will generally leave strip-like marks on the ground caused by the pedal head or wheel axle head and the ground, do not overspeed or overweight;
5. Fixed brake marks, generally at the starting point of a certain brake mark. Semi-trailers belong to large vehicles, and parking should be done carefully.
PS: After an accident of a non-motor vehicle, it is generally to fall to a certain side, and you can draw half an arc line along the outer edge of its wheel, and at the same time use "front" on the outside of the arc line, and the cyclist or pedestrian will lie on the ground after the accident. Be careful not to collide with the car behind you and park the vehicle 5 times parallel to the shoulder.
Just remember where the vehicle stopped and where it will move next, and you will be able to park exactly in the parking space.
-
Skills: 1. Correct steering wheel, return to the target.
fight in the state of vehicle stopping, on the right side of the steering wheel; Slightly release the brake pedal, semi-trailer creep function support. On the left side of the body, an extension cord is stopped.
2. The semi-trailer and the adjacent car side by side confirm that they are about 1 meter away from the adjacent car, and after confirming the safety, the rear is reversed, and the rear bumper of the vehicle is side by side to prevent degeneration.
3. The right of the car semi-trailer hits the left side of the steering wheel, slowly degrading; In the vehicle parallel to the shoulder, rotate the direction so that the vehicle, the vehicle stops in a position parallel to the shoulder. Not paying attention after a car accident. The semi-trailer is a large vehicle and parking must be very important.
4, the left steering wheel, so that the tire is restored to backup in the vehicle stop state, and the rotating wheel makes the rear tire; Slowly move backwards, with a white line on the side of the parking lot on the left rear wheel, to prevent degeneration.
5. Semi-trailer lateral parking affirmation and practice methods as mentioned earlier, should be used in the vehicle with chalk or pencil, in the event of an accident, can be used to plan, fix the traces of parking spaces and the ground.
1) Fixed parking space. Use chalk or pencil to draw a "pen" profile perpendicular to the ground in each wheel extension center of the motor vehicle.
2) Fixed parking spaces for non-motorized vehicles. In non-motor vehicle accidents, the front and rear wheels are generally lying on the ground on their sides, and the outer contour curve of the wheels is OK, and the front and rear wheels are indicated in the "front" and "rear" sentences outside the bow line.
3. Fix the brake marks. Generally, at the starting point of a brake imprint, the starting point and width of the imprint are outlined using the """ line.
4) Fixed scratches. The ground for non-motorized vehicles will generally have traces on the left pedal head or head and ground strip on the ground, we only need to follow the point of visible mark of origin and you can outline the strip line.
-
Subject 2: Field Training, Side Parking:
Reversing to see the front lever of the parking space, do not go too far from the side of the pole, when the triangle glass of the right rear door of the car is in the middle of the front rod, hit the direction to the right to the end, look at the left rear triangle glass, look at the left rear rod about two or three centimeters, and return to the left direction.
Note: In the left corner of the rear glass can not see the left rear rod can be back, back can see the last two rods, to return to the right can see the left front bar to the left seam of the front of the car, pull to the right while stepping on the brake; When looking at the last two rods, do not see the left rear bar in the rear glass, but see the left rear bar in the left rear triangle glass, and then look at the front when the head is not in the middle.
All semi-trailer reversing backwards are in the opposite direction, and when reversing to the rear, you must first feel the sense of distance and direction of the car, this is crucial, when reversing to the rear, you must observe the reversing mirror (because we can only see the reversing mirror on one side can not see both sides, but also look at the reversing mirror on the left) or the instructions of the person who commanded the rear, I will tell you your experience of reversing to the rear, for example, you are reversing to the right now, you are the front of the car, It must be the direction of the left side of the hit, remember to see the distance between the right rear foot and the intersection of the road, do not kill the direction at the beginning, the semi-trailer is also corrected while falling, look at the right hind foot of the carriage into the street, at this time in the direction to play faster, as soon as possible to let the body to come over, remember this time to think about the left side of the rear corner, if a can not pass, it is best to be on the top, in the reverse, it doesn't matter, the same driver will understand, even if others are urging don't worry, Calm down and slowly reverse, safety first, the mood noise will affect your reversing, when reversing to the rear, when the rear body is slightly deviated to the right, at that time in the wheel, the body or the front of the car are correct, if it is not correct, repair it yourself, the same when reversing to the left, remember not to make a noise.
Open semi-trailer is more hard and more professional industry, and reversing to the back is more technical level, anyway, this reversing to the back is the most difficult, to the front except for the length of the distance is the same other, to you to say in language, a lot of things are not clear to you after all, this is not a language can explain particularly clear things, in the future there is a chance, I still have a lot of practice and practice and ask some masters, let them hand over to you, so the effect will be better, It mainly depends on your own feelings and experience, and it will be good after a long time, so come on.
Semi-trailer enthusiastic tips.
First, you must check the car well before leaving the car, especially the brakes and clutch, the air pressure oil of the brakes and the water in the water tank must be checked well, but the tires are also very important.
Second, when driving, you must see if there is a car behind you to overtake when changing lanes, because the semi-trailer is long, it is not easy to change the secondary lane, and try to drive in the lane, if you overtake when going to the overtaking lane, this can save fuel and car.
Semi-trailer head tires belong to the front axle, also called front axle tires.