Gundam spray which spray paint what is gundam matting paint for

ghd pg assault.

It is recommended to use matting white. Metallic red. Matte blue. Personally, I think this works.

If you are conservative in color, you will use a matt spray can at all.

But be sure to deal with the cut before spraying. After sanding. Confirm perfection. Spray the whole body with water and fill the soil (otherwise it is easy to spend after spraying the paint).After drying. Paint according to the color scheme.

ghd pg is attacked, pay attention to cover well. Otherwise, it will be miserable.

I wish you a satisfying work (- b

ghd, halo. You can go to Gundam Heaven and say hello, or refer to the color scheme in the manual;

If you want to talk about metallic texture, don't confuse electroplating color with ordinary color, take a closer look;

That glossy white is a well-tuned white, and generally speaking, the Gundam should be made clean and bright, and the Zeon one-eyed body in the One-Year War should be made darker and older.

Matte white is best Red and blue places are used (metallic blue, metallic red) very well to make Gundam more dazzling!! Tiangong sprinkler irrigation is generally 35 yuan a can Painting method Generally 30 cm away from the object to spray a layer of thin paint after a minute and then spray a layer Continue to spray until the effect will be better If you have money, you can buy an airbrush, generally more than 1,000 yuan If you play, you can use sprinkler irrigation I wish you success!!

1.If you use matte color, it will be difficult to wipe off the line or seepage line out of bounds, because the matte color surface is rough, and the pigment that outlines the line will be firmly grasped. So use bright white, and then buy a can of Junshi oily sprinkler matting paint and spray it at the end.

2.Not good, very bad.

3.Right. to $40.

You are welcome.

1. Matting refers to spraying a layer of matting paint on the surface of the model to reduce the gloss of the plastic to increase the texture, and also protect the paint surface from being damaged.

2. Gundam. If the prime group is basically sprayed matte, because spraying matting can reduce the texture of the plastic.

3. The principle of extinction: reflected by speculars.

It becomes diffuse.

4. The consequences of matting: reduce the gloss of the plastic to increase the texture, but also protect the paint surface from being damaged, the refractive index of the surface.

I lower it, and there is no feeling of reflection.

Hello, it is a pleasure to serve you and give you the following answer: sanding is an effective way to repair up to no painting, but be careful not to over-polish so as not to damage the model. The steps are as follows:

1.First, use a polishing wheel or Sakura to take sandpaper to remove stains and residue from the surface of the model. 2.

Then, use a polishing wheel or sandpaper to remove stains and residue from the surface of the model. Ascend Tour 3Next, polish the surface of the model using polishing paste or polishing paste to make it smooth.

4.Finally, use polishing paste or polishing paste to polish the surface of the model to make it smooth. Personal Tips:

When sanding Gundam without spray painting, it is necessary to pay attention to the control force so as not to damage the model. In addition, when polishing, it is necessary to pay attention to controlling the strength so as not to overpolish and thus affect the appearance of the model.

Hello, it is a pleasure to serve you and make a solution for you: sanding is an effective way to repair up to no painting, but be careful not to over-polish so as not to damage the model. The steps are as follows:

1.First, use a polishing wheel or sandpaper to remove stains and residue from the surface of the model to achieve a smooth surface. 2.

Then, use a polishing wheel or sandpaper to remove stains and residues from the surface of the model to achieve a smooth surface. 3.Next, polish the surface of the model using polish or paste or polishing paste to get a smoother surface.

4.Finally, use a polishing paste or polishing paste to polish the surface of the model for a smoother surface. Personal Tips:

When sanding Gundam without spray painting, be careful not to over-polish so as not to damage the model. In addition, when the acacia group is bent in polishing, it is necessary to pay attention to the viscosity of the polishing paste to avoid over-polishing.

1. Assemble the GUNPLA first, and paint it after it is seamless, sanded, and covered with color separation.

2. When painting, a layer of water should be sprayed to fill the soil, and then the color should be sprayed.

3. Then matting, this step depends on whether the model you spray needs to be matted, because whether oily or water-based pigments are divided into glossy and matte and semi-glossy, you are spraying color process if you spray glossy paint, under normal circumstances, after spraying the main color is to spray matting paint, generally matting three-dimensional sense is larger, of course, according to different situations, you can also spray gloss paint and semi-gloss paint.

Note: Generally, the official drawings on the GUNPLA box are taken after the final matte or semi-matte according to the normal process.