How to make a small folding fan with red packets, how to make a folding fan

<> method: Open the rectangular red envelope belt, fold the two feet into a triangle, and make 12 in turn.

Apply glue or paste on the left and right sides.

The two red seals are folded together, and the 12 are done together to do a job of 6 groups.

Glue 6 groups into a fan shape and set aside.

Take another five square red packets and make them into bow shapes.

The finished ribbon is coated with glue.

Glue together the steps 6 and 4.

Both sides of the fan are decorated with small flowers.

Why use red packets? That's not very small, are you for decoration or can you fan the wind! There are many ways to fold a fan, the simplest is to fold it and use a bamboo skewer.

The production methods of folding fans include material selection, sawing, splitting, boiling, drying, pulling small bones, fire roasting, drilling, modeling, grinding, polishing, hot nails, and combination.

1. Material selection

Generally, whether it is bamboo or wood, you want to go through the selection of materials, and the selection of materials is to see if the size of the material is enough, whether it is suitable for processing into folding fans, and some wood is easy to deform due to its large walkability, and is not suitable for folding fans. Bamboo needs to go through a saw drum and split the material, while wood needs to be cut.

2. Boil, dry

Bamboo also needs to be boiled and dried after boiling, while wood does not need to be cooked. Both wood and bamboo have to be dried for a period of time, and the wood needs to be stored for a longer time to prevent deformation, of course, those who know that the characteristics of the wood are more stable can shorten the time, which is why the custom folding fan almost takes a month.

3. Pull the small bones

After all the processing, the next step is to pull the small bones, that is, put the bamboo material on the modeling knife, pull out the small bones by hand, and the big bones are also pulled out of the approximate shape on the modeling knife. The lateral bones are generally wide at the top and narrow at the bottom, with a thickness of about 4 mm, while the small bones are narrow at the top and at the bottom, with a thickness of about 2 mm. The side bones are roasted with fire to make them plastic, making them slightly arc with small ends and middle strands.

4. Drilling

Then drill holes for the large and small bones. Drill holes on the middle line of the tail of the fan bone with a fire column, drill bit or punch knife, the position of the hole on each fan bone needs to be the same, and the diameter of the hole should be determined according to the thickness of the nail size. After drilling the hole, the large bone is carefully shaped with the head and shoulder, and the small bone is also weighed, that is, the small bone is thinned above the shoulder.

5. Grinding

After all are done, the big bones and small bones should be sanded first, and the sandpaper should be from coarse to fine, and some good sandpaper has a better effect than the traditional process water mill. After sandpaper grinding, it is finally necessary to polish on the polishing machine, and some Sichuan wax needs to be added appropriately when polishing.

6. Scalding nails

After all is completed, the final hot nails, horn nails are the eyes of the folding fan, a good folding fan, there is a good fan nails, which is also equivalent to the finishing touch.

Finally, there is another point to talk about, only the bamboo needs to be modeled with a knife, the wood is not on the modeling knife, the wood is cut with a cutting saw, and the big bone shape depends on the pound to come out, whether it is on the modeling knife or not, it is a test of the level of the fan master.

7. Combination

The last step is to combine the fan bones with fan nails, so that the skeleton of the paper folding fan is made. Of course, in order to be beautiful and increase the artistic value of the fan bone, the craftsman will also carve, inlay, hollow and other artistic treatments on the fan bone to make it more exquisite and beautiful.

The method of making a folding fan is as follows:

Operating tools: three pieces of cardboard, double-sided tape, wooden sticks.

1. Take three pieces of cardboard and fold the origami in half repeatedly.

2. Fold it in half from the middle, paste it with double-sided tape, and turn it into a small fan.

3. Stick three small fans together along the edge line to make one large fan.

4. Stick the wooden stick on the large fan, so that the folding fan is completed.

Benefits of doing handicrafts:

Handmade can not only allow children to learn things, but also enrich their lives and make their childhood full of joy. Independently complete a handmade work is the need to use both hands, eyes and brains, in this process children will also encounter a lot of problems, if you can insist on finishing, it is also a manifestation of perseverance, no matter what kind of handmade products are made by children, they are given praise and affirmation, so that children can build self-confidence.

When children make handicrafts, they usually do some simple things every day. It depends on the baby's observation of various things in daily life. If the child observes carefully, then the things made will be vivid, and more attention will be paid to the changes in the details.

Over time, children naturally develop the habit of paying attention to the things around them.

In many times when children make handicrafts, the teacher will provide some things or shapes, and then guide children to think divergently, and then mobilize children's enthusiasm for production, so that children can give full play to their imagination and create things in their minds. This handmade not only exercises the children's hands-on ability, but also cultivates the children's creative ability.

Handmade not only depends on the creative ability in the child's mind, but also allows the child to put this creative ability into practice, move to real life, and use his own small hands to complete the creation, which is the best way to train children to complete a thing independently. From the initial design and creation to the later planning and production, it is necessary to rely on the children to complete it little by little, which is a good cultivation for the children's hands-on ability.

Fan folding method: Required materials: 3 sheets of A4 paper, woolen yarn, double-sided tape, transparent tape (or hot melt adhesive), scissors.

Step 1: Divide the yellow A4 paper into two lengthwise, and then fold it evenly into folds, this should be folded by everyone, it doesn't matter if you don't fold, then Sister Tree will give you a **tutorial.

Step 2: After the two sheets are folded and folded, they are fixed together with double-sided tape.

Step 3: In order to make the beauty of the paper fan better, you can make a small mark on the paper fan in the second step to separate the front and back. Once the second step is done, flip the pleats over to the other side and apply two double-sided tapes to both ends.

Step 4: Cut 2 strands of wool about 25cm long and glue them to the middle of the double-sided tape in Figure 3.

Step 5: Fold the bottom of the fan and fix it around with double-sided tape.

Step 6: Paste a strip of double-sided tape on the top of the green A4 paper, tear it open, and then roll the bottom end of the paper into a paper stick (note that the short end of the A4 paper is pasted with double-sided tape, and pay attention to the control strength when rolling).

Step 7: Cut out 2 1 4 size rectangles from the 3rd A4 paper, place them horizontally, and paste a strip of double-sided tape at one end.

Step 8: Roll the green paper in Figure 8 into a paper tube, fix it with double-sided tape, pay attention to the paper tube of the roll should not be too loose and not too loose, slightly larger than the paper tube below, and can move.

Step 9: After Figure 9 is fixed, wrap the paper tube in the A4 rectangle of 1 4, this paper is to decorate the paper tube with wool, and there is no restriction on the pasting method of double-sided tape. The excess wool can be wrapped up with dark green paper, or cut off with scissors.

Step 10: Cut out the remaining half of the A4 paper into a square, fold a bow or a decorative origami like a heart, and fix it on the top of the tube, so that the decoration of the magic wand also comes out, origami tutorial: bow, simple and beautiful and parent-child origami:

I have shared the fold of the heart with wings before, you can click on the blue font.

The method of folding the fan is to hold the handle of the fan with the right hand, hold the top of the fan with the index finger of the left hand, and gently twist the fan with the thumb of the right hand. When folded, it is also gently folded, and the last open bone is gently clasped with the thumb.

The fan is a must-have thing for the summer season. The traditional Chinese fan culture has a profound cultural heritage and is an integrated part of the Chinese national culture. In traditional Chinese society, fans are closely related to people's daily lives.

The earliest fans in history were the royal ceremonial fans used by the court of the 4th Dynasty of ancient Egypt.

Introduction of fan function

Fans are generally used to fan the wind to dispel heat, but if you think about it carefully, it seems that the fan is not only used to fan the wind to dispel heat, but also has some other uses. Zhuge Liang likes to hold a goose feather fan. Lupine scarf, very elegant.

With a slight shake of the fan, there is a plan. Since Zhuge Liang likes to use fans, many strategists and staff also like to use fans.

The fan became a symbol of elegance and wisdom for a while. During the Qing Dynasty, Ji Xiaolan often shook the fan and chanted poems as pairs, as if the fan shook and gave birth to witty paragraphs. The funny thing is that many literati often use fans to show off their fans, regardless of the season, so that there are many people who "wear winter clothes and shake summer fans".

In some **, romance, fans can also be used as weapons. They are often seen in the martial arts ** of Jin Cover Biyong and Gu Long. The iron fan princess's banana fan can create tornadoes, and Sun Wukong can't help it.

As follows:

Tools required: jammed, glue.

1. Fold the paper in half into a small rectangle. 、

2. After dismantling, continue to fold in half on another side.

3. Fold it in half into a small rectangular shape.

4. Disassemble the paper to resist cracking and then start to fold it in half along the two creases.

5. Fold one front and one back in half to form a ** inside.

6. Fold the center in half to make it look like a fan.

7. Then thread a tassel into it.

8. Glue the middle of the origami together.

9. The fan is folded. <>

The benefits of children doing handicrafts are fast closed.

1. Enrich children's childhood life.

Handicrafts not only help children learn things, but also enrich their lives and fill their childhood with joy.

2. Promote the development of physiological mechanisms.

In the crafting process, children engage all their senses, not only the coordination of the left and right hands, but also the coordination between the hands and the brain. Through practical practice, there will be perceptual cognition, which will promote the evolution of the brain.

3. Increase brain capacity.

According to a foreign study, when I was a child, I was exposed to art activities (handicraft, painting, etc.) to improve the capacity of the brain.

4. Improve hand-brain-eye coordination.

Fine movements not only increase the dexterity of the hand, but also improve the coordination of the hand, brain and eyes.

Preparation materials: square handmade paper, glue, rope.

Step 1: First, fold the prepared square handmade paper upwards along the red line as shown in the figure below.

Step 2: Then fold out the crease of the fan, one positive and one backward, as shown in the figure below.

Step 3, and then continue to follow the previous steps to make two identical shapes, as shown in the figure below.

Step 4, then double-sided tape to glue the two fans together and bury them in silver, so that the fan surface of the ancient fan can be wider than the ant, as shown in the figure below.

Step 5: Cut a piece of red origami, glue it to the edge with double-sided tape, and cut out a uniform thin strip with scissors, as shown in the figure below.

Step 6: Then tear off the double-sided tape and roll one end of the red line inside, as shown in the figure below.

Step 7, then make the red line and red origami into the style of the pendant, as shown in the figure below.

Step 8: Insert the other end of the red thread in the crease of the fan and fix it with double-sided tape, as shown in the figure below.

Step 9, and then use a piece of paper with the same pattern as the fan to fix the tail of the fan, as shown in the figure below.

Step 10, finally tidy up a little, and the fan folded with paper is completed, as shown in the figure below.

The specific steps of folding a fan:

1. Prepare a square piece of paper with a size of 15cm*15cm. Fold the diagonal of the paper in half, then.

2. Fold the two opposite sides of the folded paper in half towards the center line. Paper.

3. Fold the four corners of the paper towards the center line and flatten them.

4. Fold the paper in half along the centerline and gently flatten it with your fingernails.

5. Clamp the fan bone onto the center line of the origami, and then clamp the fan bone with the index finger and thumb to fix the fan bone.

6. Fold the paper one by one to the fan bone.

7. When folding to the rear, fix the fan bone on the last crease, and then gently press the entire fan with your fingernails.

8. Check whether each crease of the fan is flush, and fine-tune it if necessary.

9. Finally, decorate your folding fan with creativity: you can draw patterns on the fan or color it with a Xixiao colored pen.