Can the motherboard of Onda G41Ver3 00 use 1600 memory modules?

It can be installed and used, but the performance will be greatly reduced, and it will not play the performance it should have.

OK! 1600 will automatically drop to 1333 which is backwards compatible just like DDR2. The same is true for DDR2533, DDR2667, and DDR2800.

are all compatible... Will the motherboard not light up because you are DDR2800? And the original configuration is 553, but it will be reduced and unplugged.

Not that good performance!! Do you understand!!

Yes, but the memory will be downclocked to 1066MHz to use, and the advantage of 1600MHz cannot be used. The specifications of this motherboard memory controller are as follows:

Memory type: DDR3;

Memory slots: 2 DDR3 DIMMs;

Maximum memory capacity: 4GB;

Memory Description: Dual-channel DDR3 1066 800MHz memory is supported.

Processors that meet the above specifications are supported.

Onda G41 motherboard can be plugged into DDR3 1600 memory. The problem is in the processor. Intel's i3 and below processors, memory controllers only support DDR3 1066 and DDR3 1333.

With DDR3 1600, the motherboard will automatically downgrade to DDR3 1333.

Upgrade: The processor can be replaced with a dual-core Pentium or dual-core Celeron processor with the LG775 interface (your motherboard's processor socket is IUSHILG775).

Core 2 Duo E6550, Loose 140

Core 2 Duo E7300, Loose 200

Pentium dual-core E3400, boxed with new 280 290 memory, buy, DDR3 1333 2G plugged into the free memory slot.

Note that before replacing the hardware, unplug the connector behind the power supply, and replace it after the power is completely off.

I'm sorry to tell you, no!!

It is recommended that you upgrade your motherboard.

The motherboard shown in the figure above only has one DDR2 memory slot and one DDR3 memory slot, when you use DDR2 memory, the maximum memory is 2G, and the maximum memory when using DDR3 memory is 4G (you must use double-sided particle memory, single-sided particle 4G is not recognized, Intel 4 series design reasons), in addition, pay attention to DDR2 and DDR3 can not be mixed, so the maximum memory is 4G when using DDR3

The motherboard of the G41 generally supports 8G of RAM.

Onda G41L motherboards have two memory slots, i.e. a maximum of two memory slots and a minimum of one.

You need to open the side cover of the case to see how many memory modules are on the motherboard, if there is only one, you can buy another one with the same model and capacity. If there are already two on the board, then you can only take off the board and buy two 2g strips to plug in. However, if you are using an XP32-bit system, it cannot recognize 4G memory, you can separate such as 512M in the BIOS for the integrated graphics card.

Onda G41L motherboard comes with PCI-E X16 graphics card slot, which can be used by basically all graphics cards on the market today, so you don't have to worry. It's just that because your host configuration is low, you can't fully play the performance of today's mid-to-high-end graphics cards. However, you may soon upgrade your console, and the graphics card will continue to be used.

This motherboard supports dual-channel DDR3 1066MHz memory, you can also add another memory, you can choose HD6570 or HD6670 graphics card.

Personally, it is recommended that you add a strip of memory and use it for a year or two, and then change the CPU + motherboard + memory, there is no need to change the graphics card!

Indifferent yes,HD6770,7770,7750 on the graphics card,360 ball is to display the memory occupancy,It's no problem with the graphics card,It's just that the memory occupies more,It's no problem in adding root 2G memory。

This motherboard doesn't support DDR3 memory, and this board supports up to 4G RAM, so you can use two 2G DDR2 800 or 667 memory to form a dual-channel.

It is also possible to use a single 4G DDR2 800 or 667 memory.

Detailed parameters.

1: This is an Intel motherboard, so you must bring the phone with you when you buy a memory module. (or the store agrees that it cannot be used, and it will be returned).

2: Because there is a kind of memory called AMD dedicated memory, Intel basically can't use it. Because of Intel's springboard, you must bring the machine with you when you buy memory, or the store agrees that you can't use a package to return it.

3: Onda G41C+ version is all onboard, with 1 DDR2 memory slot and 1 DDR3 memory slot.

4: The DDR3 memory slot on the board supports up to 1066MHz memory, and theoretically the motherboard will reduce the memory of 1600 to 1066 for normal use.