-
Anonymous users2024-02-05Here are a few suggestions for your reference:
1) This feature is available in the ATI graphics driver. The graphics card is reset when it doesn't respond to drivers. In this case, you can try to turn off the vpu The specific operation is to click the advanced button where the resolution is set.
Then you can see that a tab is vpu recover, so I don't need to say more about the rest
2) Try to update or reinstall the driver, try to change the graphics card to a slot, and then go to the merchant to see if there is a problem with the graphics card.
3) Check the problem of the graphics card, the temperature is too high and the problem of vpu reset may also occur, it is recommended to directly open the case and test the heat sink temperature of the graphics card by hand, sometimes it may not be accurate to test it with software. If your hand can't stay on the heatsink for more than 5 seconds or you have a direct contact feeling, then the core temperature should be above 70 degrees, at this time you should find a way to reduce the graphics card problem, you can use Rivatuner to increase the fan speed, you can also reduce the frequency, if the DIY level is in place, you can replace the heatsink.
4) You need to adjust the settings under COMS, adjust the CPU temperature to more than 70 degrees to alarm, and adjust the temperature of other devices to alarm above 50 degrees.
5) Check the power supply of the graphics card, inferior power supply, inferior external power supply cable or external power supply cable is not plugged in tightly, which may cause insufficient power supply when the graphics card is under high load and cause the problem of VPU reset, it is recommended that you replace a power supply and test the external power supply cable.
6) Overclocking can also cause this situation, not only the graphics card, if the BIOS is not set properly, overclocking the CPU will cause the PCI-E interface to be overclocked synchronously, and it will also cause the graphics card to work unstable, if there is overclocking, whether it is the graphics card or the CPU, please reduce back to the default frequency, and do not use the ghost version of the system, and do not use the modified driver. If there is a problem, you should use the original operating system and the official driver test.
-
Anonymous users2024-02-04The computer has a black screen, and this situation generally has the following aspects:
1. After booting up, the continuous sound of "Di Di" is sensitive, black screen, this is a fatal error of the system, can not continue, alarm by the horn, the memory module is damaged, or the gold finger of the memory module is polluted, or there is too much dust in the memory slot.
2. After booting up, there is a continuous sound of "beep", the screen is black, there is no heating on the surface of the CPU, or the heat generation is obviously low, which is generally due to the damage of the voltage adjustment tube on the motherboard.
1. Clean the dust and rust on the graphics card slot, graphics card gold finger and monitor data cable interface. >>>More
The solution is actually very simple, just turn off "Automatic Updates", the specific steps are as follows: right-click on the "My Computer" icon, select "Manage", open the "Computer Management" window, click "Services & Applications" in the left pane, select "Services" in the lower menu, and then double-click "Automatic Updates" (or "Automatic Updates") in the right pane to open the "Automatic Updates" property (Local Computer) dialog box, in the General tab, change the Startup Type to Disabled, click the Stop button under Service Status, and finally click OK to close the dialog box. >>>More
First, understand what was going on and what you were doing before the failure. If the computer fails after overclocking the CPU or memory, etc., the fault is related to overclocking, as long as the frequency is restored to normal. >>>More
If reinstalling the computer doesn't work, it doesn't mean that your system is the problem. It may be that the memory module in your console is not plugged in securely or there is a lot of dust. You can unplug the memory module and wipe it gently, or use a small brush or hair dryer to clean it up, and be sure to clean it carefully. >>>More
b Khan. It should be the matter of the graphics card, the black screen of the display is related to the memory, enter some games or do something, and that's it.,I used to have a problem with the graphics card.,It's good after restarting.,This is your graphics card problem.,Think about it, you can guess it.。