Hello, I would like to ask how your feed is stored 10

Ventilated, dry, cool place.

Summary. Hello: The shelf life of feed is generally 45 to 60 days.

This is on the product label of the feed, some feeds are 45 days in summer and autumn, 60 days in winter and spring, or 60 days in summer and autumn and 90 days in winter and spring. There are also 90 days written directly regardless of the season. Thank you for the new trust, the above is my reply, I hope it can help you, I wish you a happy life

Hello: The general shelf life of feed is 45 to 60 days in Senliang. This is on the product label of the feed, and there are some feeds for 45 days in summer and autumn, 60 days in winter and spring, or 60 days in summer and autumn and 90 days in winter and spring.

How long do pigs in the tower last?

Pig feed is loaded in a tower. How long can it be kept?

Hello: Pigs packed in the feed tower can be stored for 90 to 120 days.

Does it matter if the temperature is high or low?

Hello: The pig feed tower is loaded with 15 to 20

Some kisses, the higher the temperature, the shorter the storage time!

The tower is outside. The temperature is about 40 degrees Celsius. Can it be stored for 90 to 120 days?

How long is this temperature stored now?

Hello: The high temperature storage time of the material tower is 15 to 20 days.

The amount above is incorrectly written<>

1. Animal protein feed. Animal protein feeds such as fishmeal, bone meal, meat and bone meal, silkworm pupae are most susceptible to insects and bacteria, and once these conditions occur, their nutritional content will be affected. However, in general, the amount of this feed is not very large, and it is good to store it in a plastic bag.

Note that it must be sealed well and placed in a ventilated and dry place, which can effectively prevent it from getting wet or even mildew. In addition, it is necessary to check regularly and deal with any abnormalities in a timely manner.

2. Oil cake feed. Oilseed cake feed is mainly composed of fat, protein and a variety of vitamins. This substance does not have a natural protective layer, and is particularly prone to mold and deterioration, making it difficult to store.

Therefore, we should pay more attention to this kind of feed when we store it. First of all, when palletizing, choose a flat place and spread a layer of linoleum reed pie or thick dry sand (about 20 cm thick) on the ground. Another point to note, we all know that the moisture content of oil cake feed is relatively high when it just leaves the factory, generally higher than 5%, so when stacking a layer of oil cake to pad a layer of dry straw or sorghum straw, this is also for moisture-proof wax transportation, and at the same time can be ventilated.

Feed is susceptible to oxidative rancidity, clumping and mildew during storage, resulting in nutrients.

loss and unnecessary loss and waste. In addition to bites and contamination of feed, temperature and insects can also cause an increase in temperature and humidity. When the temperature is 15, insects are very sensitive to temperature changes.

When the temperature is below 5, the insect reproduction is very slow or even stops; When the temperature reaches 41 or above, it is not easy to exist. The suitable temperature for insect reproduction is about 29, the life cycle of insects.

It is about 30 days and reproduces quickly; In general, fumigation can be used to disinfect and kill insects when pests are found.

Oxygen in the air oxidizes fats, affects the biological value of proteins, destroys certain vitamins, and not only affects nutrition, but also reduces palatability. microorganisms, molds, bacteria, and yeasts.

It can multiply rapidly due to environmental changes, reduce the utilization of raw materials, and can also produce toxins and lead to poisoning. The properties of the raw material itself, such as fineness, pH value.

Integrity, uniformity, moisture content.

maturity, etc. In general, a raw material with a moisture content of less than 13% inhibits the growth of most microorganisms, and less than 10% reduces the production of insects. Storage equipment, heat preservation effect and storage period will all affect the quality change of feed raw materials during storage.

Management includes pest control, ventilation, warehouse turnover, first-in, first-out, etc.

Feed warehouses should be located in cool, dry, well-ventilated and higher ground as much as possible. Walls and floors should be coated with cement to prevent leaks, rats, and floor moisture. Do a good job of roof waterproofing.

and perimeter drainage. Before storing the feed, the storage warehouse should be cleaned and, if possible, doors and windows should be closed for fumigation. The feed should be kept at a distance from the ground and walls, and the ground should be separated from the feed with plastic supports.

When storing feed in rainy days, doors and windows should be closed in time, and windows should be opened for ventilation on sunny days. Low temperature, low humidity and good ventilation conditions are conducive to the safe storage of feed and can prevent feed oxidation and mildew. In general, the relative humidity of the feed storage room.

It should be below 60% and well ventilated to keep the temperature of the storage room as low as possible. If possible, wet and dry thermometers can be installed to monitor temperature and humidity. On the contrary, high temperature and humidity are not conducive to feed storage.

According to the test, when the temperature is lower than 10, the mold grows and multiplies slowly, and when the temperature is higher than 30 and the humidity is suitable, the mold multiplies rapidly, and the number of molds in the feed increases significantly, resulting in the mildew and deterioration of the feed.

Rats and insects not only consume feed, creating additional waste, but also oxygen, producing carbon dioxide.

and water, which releases heat, resulting in a local temperature rise and a rise in humidity in the feed, resulting in clumping and mildew in the feed. Rats can also burrow in walls and roofs and smuggle food out. What's more, when it rains, rainwater can pour from the rat hole into the storage room, causing the feed to be moist and moldy.

Therefore, rodenticides and mousetraps should be used.

Kill the rats. If insects are found in the feed, the insect feed should be picked out immediately, the insects should be killed with a safe insecticide, and an insecticide drug should be added to the remaining feed to prevent the pest from recurring.

You should pay attention to the temperature, and you should also store it in a relatively dry place, and the storage time should not exceed three months, and it should not be in some humid places, and it should be kept dry, etc., these are all things that should be paid attention to.

You need to pay attention to moisture, you need to pay attention to drying, you need to pay attention to weighing, you need to pay attention to the date, you need to pay attention to the mildew prevention method, and the weather next Monday.

Pay attention to the storage environment, keep it clean and hygienic, keep it dry, so as to avoid the right amount of deterioration, and be sure to choose a suitable place for storage.

To choose the correct feed storage location, pay attention to the humidity to control below 65%. Pay attention to the storage should be strictly controlled feed moisture content within a safe range, regular inspection, timely up and down and ventilation.

Measures to prevent feed mildew 1, strengthen raw material testing In addition to the necessary sensory inspection of feed raw materials, the feed factory should also strictly carry out testing and testing in accordance with the "Feed Hygiene Standard" GB13078-2001, and it is strictly forbidden to purchase raw materials with high moisture, peculiar smell and different color, especially the feed raw materials that cannot be purchased from mildew. 2. Do a good job in production management In the production process of feed, there are many factors that may lead to mildew in feed, which should be strictly controlled. First of all, it is necessary to control the moisture content to ensure that the feed moisture is controlled within the allowable range.

The second is to clean up the dead corners of the workshop and production equipment that are easy to retain feed in time, so as to avoid the accumulation of these dead ends for too long and cause the growth and reproduction of mold. The third is that the feed bag should be tightly sealed, the bag mouth should be folded and then sewn, and the eye of the needle should be dense when locking the bag, and locked tightly to prevent the humid air from being inhaled into the packaging bag, causing the material at the seam of the packaging bag to absorb moisture and become mildew. 3. Improve storage conditions The feed storage warehouse should be dry, cool, high, with good ventilation conditions, and the ground and walls should be moisture-proof and moisture-insulated.

The feed stacking should be standardized, the height should be appropriate, the bottom of the stack should have a backing plate, and a certain distance should be maintained between the stack and the wall, and between the stack and the stack. Feed raw materials, newly produced feed and returned feed should be stored separately to avoid cross-contamination. The feed depot should be cleaned and disinfected regularly.

4. Do a good job in feed transportation Before loading the feed, the water in the box should be removed, and the rainproof cloth should be covered during transportation to avoid the feed being wet. Feed transportation should be carried out by car to avoid backlogs on the way. 5. Reasonable purchase of feed feed purchase should be based on the use of a reasonable procurement plan, can not buy a large amount of feed at a time, resulting in a backlog, in addition to considering the backlog time is too long and easy to mold, but also consider the validity period.

The air humidity is high in the rainy season, and you can't buy too much feed, and pay attention to prevent rain from wetting the feed.

To put it simply, don't go near a damp place near the fire! To be placed in a large and secure warehouse.