-
If you want to use the machine, you delete the ones you don't want first, and then back them up.
The soft grid is * I have checked my phone 2 times.
I didn't find anything bad.
Fast is easy to use.
The hard bar is to press and hold, dial key, and on/off key at the same time in the shutdown state.
It is generally recommended that the soft grid and the hard grid are used when the machine cannot be turned on.
If you still don't feel good after the soft grid.
Then make a hard grid.
-
Soft compartment : The lock code is 12345
Hard grid: In the case of power off, press and hold, dial key, and on/off button.
Make a good backup of important text messages, business card holders, and important documents before the grid.
-
The lock code is 12345
After the grid reverts to the way you bought your phone, but the contents of the memory card will not be lost.
-
In standby mode, press and hold the , dial key, and on/off keys at the same time.
All files are lost after lattice machine including ** book.
-
It's best not to latch the machine, it hurts the system, and many supported software can't be installed or installed many times before it can be installed.
-
First of all, no matter how you check the phone, after formatting, all mobile phone C drives are restored to the state when they left the factory, of course, including your text messages and ** book, so you can back it up before formatting.
**Book, although there are formatting methods that can save user settings, but it is better to back it up.
Soft grid machine: 1The easiest, use the "Factory Reset" feature in your phone's settings and follow the prompts.
2.Input. - Soft reset of the mobile phone (save ** number, information, incoming and outgoing caller numbers, etc. after the grid).
3.Enter *, original password 12345. Will your phone prompt you to restore all factory settings? The phone will restart, select Yes, and then.
After entering the lock code, the default is 12345, and you can select confirm after entering.
It should be noted that there are some e-disk software (such as call enhancement, screen saver, etc.) and font operation that boot up the permanent memory, and if the font is running, it is invalid to format it with this method. Therefore, before the soft grid, close all these software, and delete the Chinese font file before the format can be successful. Font files are generally under system fonts, delete font files, please use handyfile to rename fonts directory, and then delete!
Hard grid machine: This method is generally used when the system is so chaotic that it can't be turned on or soft formatting has no effect, this formatting is more completely shut down, press and hold the call key when you turn on the 3rd key * key and then.
Press the power button and don't let go until the screen comes out of the ruined liquid and swims "formatting....After that, you can let go. This formatting is more thorough and does not cause invalid formatting.
Other: Turn off and press the power button, without any prompt to start the grid.
Precautions: Sufficient power must be guaranteed when formatting, and generally it should be operated under full power.
It's a good idea to uninstall all the software and see if there are any similar "system errors"! If there is no similar "system error", then proceed to the grid! Do not attempt to shut down the machine during the grid, do not plug in the charger, etc. Also, try to give priority to the soft grid.
The original software fiber pin part installed on the MMC card will be affected, so under normal circumstances, the important data of the MMC card will be backed up and then formatted, and all the programs saved in the E disk will be reinstalled after the format of the mobile phone is completed.
In short, the most thorough formatting steps are: uninstall all the programs that can be uninstalled in the program management Remove the MMC card Check if there is a system error Format the phone Install the MMC card Format the MMC card (the phone at this time is the purest basic system) Install the programs that need to be installed Restore contacts is completed.
-
1.Software formatting: Use PSIOC software stools to format the phone, the lock code is 12345, this method will not lose line 2
2. Soft grid: Enter on your phone.
After you are asked to enter the lock code, the initial password is: 12345, if you have changed the password of the mobile phone, that is the changed password (not the SIM card password), and then a white screen appears, only the word nokia is displayed, 2 3 minutes after the grid is completed, re-enter the time; Line 2 may be lost
3. Hard grid: turn off the computer first, and then press and hold the dial key, "* key, "3" key when turning on the phone, and turn on the power until the word "nokia" appears (no button can be released during this process). Wait a few seconds until "formatting...... appears", then you can release the above buttons.
After a few minutes, the system format is completed, and the phone automatically restarts and enters the standby screen. Line 2 will be lost
The above grid machine needs to pay attention: keep the power absolutely sufficient, do not try to shut down the grid on the way, can not plug in the charger, etc. Generally, soft grid is preferred.
-
Grid machine operation: There are two types of grid machines: soft grid and hard grid.
Soft Grid: Enter * during standby, and then enter the confirmation code (the original is: 12345, only you know if you change it).
Restoring the system to factory settings will delete the personal data of the C drive. Simple phone problems can be solved! "Hard Grid":
Press and hold the * button, 3 button, and green call button at the same time, and then press the power button. You can't let go of the handshake screen until the phone is turned on! Restoring the system to factory settings will delete the personal data of the C drive.
Serious phone problems can be solved.
-
When the phone can't be turned on, you need to press and hold the dial key +*+3 button when the phone is turned off, and then press the power button until the region and time are required to be set after powering on.
-
Press and hold the * button, 3 button, and green call button at the same time, and then press the power button, and OK after restarting.
-
Memory card formatting: You can take out the memory card and format it with a computer, and you can use it for mobile phone formatting*
-
Enter * in standby
Lock code 12345. But be sure to make a backup.
-
The soft grid is the program management program, except for the red system file, the other installation files can not be used, and some of your settings, such as time, etc., will also be initialized, but**this, the information is in the hard grid is to initialize everything It is recommended that if you have a memory card, the installation files are in You can go elsewhere and then soft grid the phone and format the memory card.
-
* After pressing it, it will be restored to factory settings, the same as the one you just bought. Soft grids are of little use.
-
Note: The battery is sufficient when the grid is used, and the data is backed up.
1.Enter * on standby – soft bar. Only restore the system to factory settings, do not delete files, the effect is not obvious.
2.Standby input* – soft and hard. Restoring the system to factory settings will delete the personal data of the C drive. However, Line 2 cannot be retained, and it will return to its original state. Sometimes, the C drive file is not deleted with the grid after the machine, and the system is unstable.
Key hard grid – hard grid. Restoring the system to factory settings will delete the personal data of the C drive. Route 2 can be reserved. It's the same as flashing. Recommended.
Shutdown state operation) hard operation method:
It requires the cooperation of two hands and one hand to manage. Press and hold Pure Strike.
and the green call button, and the other hand just the power button. You can't let go until the handshake screen appears.
formatting...
It can be loosened, and after about two minutes, the phone will automatically turn on and it will be done. (6681 6680 6630 n70 n72 will not appear.)
formatting...
words, you have to see the time to set the pants before you can let go).
-
I don't know how he can't install the sedan book.
There may be a setup issue.
Open Cheng Shu Zheng Hongxu management.
-
Install the software in the app.
Select All).
If you can't do it, just check the machine!
-
Soft grid: *, initial lock next to the code 12345. Hard grid: After shutting down, press and hold *, Qiao Qi code 3, dial key and then power on, don't let go of the first three keys before the screen does not prompt, and wait patiently for the system to recover and restart.
Grid machine. It will automatically empty the phone and back up important things such as the ** number in advance.
-
Grid words! It is necessary to infiltrate the slippery slip and put the card in check! Otherwise, it will prompt that the software is being installed when it is turned on in the future! The correct order of the wax is to shout the trembling card first! In the lattice machine! *##
-
Grid phone? Soft grid: *
Hard grid: When the screen light is on when the device is turned on, immediately press and hold the "dry or no shed dial key" + "group celebration +" 3 at the same time.
Make a backup first.
-
If you have installed a lot of software into the card before, you'd better back up the original card file, and then put your card.
Hello, this is a constantly updated post on the Saipan forum: