How often is a Panerai watch serviced?

Please note that watches are usually in operation 24 hours a day, seven days a week. The frequency of maintenance of a watch depends on the type of watch, the climate and the condition of the wearer.

As a general rule, as with other precision mechanical tools, the watch should be serviced at least every 2-3 years to ensure its reliability and accuracy.

What are the contents of professional maintenance?

The movement is completely disassembled, cleaned, oiled, reassembled, adjusted, and functional; - repair or replacement of any movement components that are worn-out or malfunctioning;

Replacement of the following parts: the crystal, crown, pushers, seals and batteries of the quartz movement (those included in the service price list, excluding specially shaped mineral glass and sapphire crystal);

Usually the watch industry recommends that the watch must be sent back to the service center for maintenance every one to three years, depending on the situation

The watch that is worn every day, it can also be said that the watch does not leave the hand for 365 days, if you find that the error of the watch is very large, or the watch is water, it is best to send it for repair and maintenance; If everything is fine with your watch, it's best to have it serviced every three to five years; Some people do not leave the watch, a wear is more than 10 years, this is not the way to wait for the watch, because of long-term use, the lubricating oil of the watch will still be lost or dried up, in the case of oil loss, it will accelerate the wear of the shaft; There are quartz particles in the air that we can't see with the naked eye, which will adhere to the oil, and if you don't maintain it for a long time, and let the watch keep going, it will only accelerate the wear of the shaft; Some people wear it for 10 years, 20 years, the watch will go, never want to maintain, and when it fails, many parts have been seriously worn, after maintenance, its accuracy will be greatly reduced, not as good as the new watch.

Hello, normally mechanical watches about 3-5 years also have to be maintained, with the use of the watch will cause the friction between parts to increase, strap corrosion or careless use caused by scratches and other factors caused by damage, you need to clean the strap of the watch and do some polishing treatment, so that the watch looks new, so regular maintenance is a must, it is recommended that you send it to a professional maintenance organization for regular maintenance.

I do regular maintenance for the watch.

Every 1 to 4 years, corresponding maintenance should be carried out, waterproof elements should be replaced, the function of the movement and the power consumption of the movement should be checked, the movement should be cleaned and the appearance should be maintained. This kind of maintenance will effectively extend the service life of your mechanical watch.

Do not place the watch on the stereo or TV to prevent magnetization.

Do not leave the watch in a closet with mothballs to prevent the oil from deteriorating.

Never touch the watch with corrosive substances, especially acids, which can corrode the case.

It is not difficult to take care of your watch on a daily basis, as long as you can do these things on a regular basis, you can trust that your watch can always be kept in the best working condition. When it is worn on your wrist, it will definitely highlight your charm and temperament!

It is recommended that you can open the warranty coupon attached to the purchase of the watch, under normal circumstances, there will be a service address on the warranty copy, or find a regular watch service center for testing and maintenance of the address of the store, etc., if there is a professional after-sales maintenance center nearby. For more information about watch repair questions and related information, you can click **Consultation or Dial** for consultation to provide you with professional watch repair services.

Located in Room 2208, Fuer Building, East Third Ring Road, Chaoyang District, Beijing (north of International Trade Building), serving a variety of maintenance projects such as [Time Failure], [Cleaning and Maintenance], [Replacement Accessories], [Watch Water Ingress], [Replacement Strap], [Polishing and Beauty], [Appearance Damage], [Testing and Appraisal], etc., the whole process of watch maintenance is operated transparently, with exquisite repair and maintenance technology, and efficient service level, escort for your watch! Support SF Express mailing.

Maintenance method of mechanical watch:

1.If it is a manual mechanical watch, the mechanical watch should be wound regularly, and it is recommended to wind the mechanical watch around 8 pm.

2.Automatic watches, such as insufficient arm movement, need to manually wind the watch, and the rotation of the crown needs to be controlled within 20 turns.

3.If an automatic watch has not been worn for more than 40 hours, it is necessary to turn the crown twenty times to activate the movement's drive system.

4.Regardless of the water resistance of the watch, it should be avoided as much as possible, and if it does, wipe it dry and make sure that the crown is locked at all times. It is best to replace the waterproof ring once a year.

The following operations are included in the watch comprehensive maintenance and repair program:

1.The movement is completely disassembled, cleaned, oiled, reassembled, adjusted, and functional;

2.- repair or replacement of any movement components that are worn-out or malfunctioning;

Watch maintenance. 3.Replacement of the following parts: the crystal, crown, pushers, seals and batteries of the quartz movement (those included in the service price list, excluding specially shaped mineral glass and sapphire crystal);

4.Restore water resistance (in the case of a water-resistant model);

5.Refurbished case or bracelet (two-tone, gold-plated and PVD-plated case and bracelet, wash only).

For mechanical watches that are not worn for a long time, they should also be wound regularly to allow the mechanism to rotate. As for quartz watches, their battery life is generally 1 to 2 years, and the battery should be replaced regularly, and the sealing ring of the watch should be replaced when the battery is replaced, and it should be tested for water resistance. For watches with a battery replacement prompt, the battery should be replaced within 3 weeks of the prompt.

The material of the watch case strap is tungsten titanium alloy, stainless steel, soft fiber, ordinary steel and other types, in addition to avoiding friction and collision with objects of more than or the same hardness, it is also necessary to clean it regularly to maintain its good decoration. In addition, seawater, salt water baths, perfumes, shampoos, nail polishes, nail polish removers and other cosmetics containing chemical substances can corrode the gold plating and metal surface of the watch, so avoid contact with it. Even if the watch has a waterproof function, it is not all waterproof, such as 30 meters of water resistance, it can only be protected against hand sanitizer, face water, rain, car splashing, etc., if you shower, swim, etc., the watch will definitely not be able to bear it.

No matter how deep the waterproof is, you should not wear the watch to sauna, as the heat of the steam will accelerate the aging of the waterproof rubber ring and cannot protect the movement normally.

The maintenance of mechanical watches is a bit annoying, generally follow a rule, if it is a general watch, 3-5 years can be, whether it is 3 years or 5 years, it can be defined as follows: within 3 years, regardless of him, 3 years of the whole [Xidan] North Street 7f, pay attention to the daily error, it is best to record the error of a week in a row, calculate the average, and write it down. For example, the average is 12 seconds faster per day, and when the error of the watch becomes about 7 seconds faster per day on average, that is, when it is 5 seconds slower on average, go wash the oil.

Panerai watches should also be maintained in order to reduce damage and prolong the life of the watch.

Do not wear the watch on your wrist to sleep, if the watch is a luminous watch, it will have adverse effects on the body. This is because the luminescent material coated on the hands and dial of the luminous watch is mainly a mixture of radium and zinc sulfide, and the rays emitted by radium can stimulate zinc sulfide crystals to glow. Even if it is not a luminous watch, turning over and moving while sleeping at night can easily injure the watch unconsciously, and the watch can also affect the quality of sleep.

Therefore, before going to bed, it is best to remove the luminous watch and put it on the table.

Do not place the watch on the amplifier, stereo, or TV to avoid magnetization.

Be careful not to place the watch in a closet with mothballs to avoid deterioration of the watch oil.

Be careful not to open the back cover of the watch at will, in order to avoid dust entering the movement and affecting the normal operation of the watch.

Panerai Maintenance & After-Sales Center is located in Room 707, 7th Floor, Tower 1, Grand Gateway Center, No. 1 Hongqiao Road, Xuhui District, Shanghai, Panerai Repair Shop - Insufficient kinetic energy: The watch is not winded enough, and the kinetic energy is insufficient. Especially for automatic watches, the efficiency of automatic winding is low, and the amount of arm activity needs to be larger, and typing on the keyboard while wearing a watch makes the range of motion of the wrist too small, and the winding efficiency is very low.

If the amount of exercise is small, it can be wound by manual winding.

At present, there are so many people wearing watches, not only because wearing watches will make people more temperamental, but also because it is also a kind of literacy. However, due to the fact that many people do not understand the watch and wear the watch wrongly, which leads to some failures, so how to maintain the watch usually?

1.Regular maintenance: usually pay attention not to contact more acidic and alkaline things (such as soap with a watch), do not collide strongly, try to stay away from magnetic fields (such as microphones and other things), do not get close to steam, it's fine.

For watches with good sealing, dust is not easy to enter the watch machine, and the lubricating oil in the machine is not easy to volatilize, disperse and deteriorate, so it can be maintained once every 4-5 years. If the user works in a humid or dusty environment, the maintenance time is about once every two years. In short, it is necessary to be flexible according to the schedule of the table.

If you find that the watch is flooded, damp, magnetic, or bumped into a large error or stopped, it should be cleaned and checked in time.

Mechanical watches should be oiled regularly, and you can do it once every two years, so that your beloved watch can stay as young as you.

2.Winding every day: For a hand-wound mechanical watch, it is recommended to wind it manually for 20 to 30 laps for the first use, and then it is best to wind the watch regularly every day.

The Service Center provides Panerai watch strap customization, cleaning and maintenance, appraisal, refurbishment, fault repair, Panerai watch exterior parts damage replacement, strap replacement services. Our technicians have undergone strict professional skills training and provide two years of after-sales guarantee services. The service center is guided by the watch manufacturer on the spot**, **transparent, no hidden consumption, no additional charges.

If you need to repair and maintain your Panerai watch, it is recommended to go to an official after-sales service or a regular watch repair center.

Nowadays, there are many watch repair companies, and there are also many watch repair points, which makes us dazzled and don't know which one to choose. If you need to repair and maintain your Panerai watch, it is recommended to go to an official after-sales service or a regular watch repair center. Try not to go to smaller places, although the asking price is low.

But if it's okay to fix it, and if the Panerai watch is broken, there are scratches on the surface, and there are few parts inside, then we will regret it.

Precautions for Panerai watch repair

1. When repairing a Panerai watch, all parts of the Panerai watch should be separated, the movement should be scrubbed with gasoline, then the other instruments in the watch should be cleaned with professional equipment, and finally oiled and assembled. In addition to the parts in a Panerai watch, the case in a Panerai watch should also be polished while cleaning the watch.

2. Because the watch has high requirements for technical parameters, cleaning the watch is a very precise job, and professional cleaning generally takes 5 days to complete. However, an old watch can often be turned 80% new after being professionally cleaned with such a mess.

3. For mechanical watches that have not been worn for a long time, the movement parts should also be replaced regularly. As for quartz watches, their battery life is generally 1-2 years, and the battery should be replaced regularly. When replacing the battery, the sealing ring introduced by the Panerai watch should also be replaced and the water-resistance test should be carried out.

If the watch is scratched, it can be done by grinding, wearing, and polishing the worn watch to look brand new. If there is a serious bump that causes hard injuries, smashes and dents, the repair process is relatively complicated, and you need to bring the watch to a professional watch repair center for repair.

Daily maintenance method of the watch:

1. Do not open the back of the watch at will, so as not to affect the normal operation of the watch.

2. Don't put your watch in the closet, mothballs will make the watch oil deteriorate.

3. Do not put the watch on the amplifier, stereo, TV, so as not to magnetize.

4. If you store the mechanical watch that you do not wear for a long time, you should exercise regularly for a short period of time every month, and the automatic movement watch should gently swing back and forth on the wrist for a few minutes or a period of time to ensure the normal operation of the performance of the watch.

Panerai Watch After-Sales Center: 400-659-0877 Panerai watches are decorations and status symbols. However, due to the lack of maintenance after long-term use, the timing of the watch will also change, and even worse, the time will exceed the error range, affecting the normal use of the wearer.

So, why do Panerai watches move fast?

1. The speed of a mechanical watch is mainly determined by the swing frequency, generally the larger the swing, the smaller the swing frequency, and the smaller the swing, the greater the swing frequency. Generally, Panerai watches use the telescopic telescope of the hairspring to control the swing, which is the basic concept of speed adjustment. If the retractable hairspring is longer, the swing will be larger, the frequency will be reduced, and the Panerai watch will be very slow; On the contrary, the more the pendulum frequency increases, the faster the Panerai watch becomes.

2. The efficiency of the oscillating weight and the hairspring, especially the oscillating weight, the efficiency of the oscillating weight is not very good, which will lead to the one-sided accuracy change of the oscillating weight under a certain swing amplitude.