How to allocate the study time of each subject of Constructor II

In general, one practical course takes more time than two public courses. It depends on your individual learning. Memory ability!

1. Practice must account for more than 50% of the learning time, if there is no on-site construction experience, then it is even more necessary to focus on practice, followed by public subjects.

2. Liberal arts are used to conduct examinations, and many students are studying science and engineering, so to break through the liberal arts examination, you need to have a standard of passing score line in learning, and then improve it a little higher.

3. Management is also used as a theoretical support for the four major moral case analysis questions in the practice of the second construction, and management and practice are not separated.

In the first year of this year, I am preparing for the second-level construction engineer exam, and how to master it when I get started, that is, what aspects do I need to start learning.

Three aspectsThe first aspect is the official textbookThe second area is intensive lecture (learning sequence management - regulations - cases).

The third aspect is the past papers. The intensive course is followed first, and the intensive course is also taught in the order of the page number of the textbook.

The second is to refer to the past past questions to see how the question types are produced over the years, and to study with a focus.

From oneIn 2018, he passed the municipal major of second-level constructor with a high score in 50 daysExam preparation experience. (214 vi 72839).

Consideration of the preparation time for the second-level constructor: public classes first, followed by practice.

The two public subjects of the second-level constructor, regulations and management are the first-level disciplines in our national examination category, but what we learn is not the comprehensive basic knowledge of regulations and management, but the two construction of all practical majors have a total of six practical majors: construction, municipal, electromechanical, highway, water conservancy and mining, they extract the relevant parts of regulations and management, so it is the knowledge related to construction engineering regulations, construction engineering construction management, in fact, the internal logical relationship and progressive relationship of these three subjects, If you have laid a solid foundation in public courses, you will find that you have already mastered a lot of content, so it is much easier to learn and practice when you learn practice.

Hello, glad to answer your questions! Zhongbo replied: Regarding the allocation of learning time for the three subjects of the second-level constructor, each candidate should allocate it according to his or her actual situation, but in general, it can be arranged like this:

1) After registering for the exam, preview the entire textbook and have a preliminary understanding of the entire exam content. For beginners, it is recommended that you follow the beginner class and the advanced course.

2) Before mid-March, the second round of overall review will be based on the teacher's courseware or handouts, and the practice of related topics will be strengthened.

3) From April, you should return to the exam materials and review the questions you have done wrong to deepen your impression.

4) During the sprint period in May, don't engage in the tactics of the sea of questions, do the previous questions thoroughly and understand them thoroughly, and read more handouts summarized by the teacher.

I hope to be able to answer your questions, if you have other questions, welcome to pay attention to consultation!

Constructor II Examination Subjects:

Construction Management of Construction Projects, Construction Engineering Regulations and Related Knowledge, two public subjects and Professional Engineering Management and Practice, (including six professional categories, choose one subject to apply).

The subject of "Professional Engineering Management and Practice" is divided into 6 professional categories: construction engineering, highway engineering, water conservancy and hydropower engineering, municipal public works, mining engineering and mechanical and electrical engineering.

Preparation Guide for each subject:

1.Statute. The knowledge points involved in the regulatory examination are becoming more and more comprehensive and detailed, so you must be familiar with the teaching materials. In the usual learning process, we can combine practical examples in daily life with these boring clockwork laws and regulations, focusing on understanding, remember not to memorize, in recent years, the examination of laws and regulations has paid more and more attention to the ability to integrate between chapters.

2.Construction management.

Construction management involves more norms and clauses, involving relevant norms, regulations and methods in China, which are indeed complex.

On the one hand, the knowledge points of construction management are scattered, which is easy to cause memory confusion; On the other hand, construction management is more about testing the candidates' ability to "chew the text", and there are many traps in the exam Chinese word game. Therefore, in the process of review, the knowledge points of construction management need to be memorized by rote, and the key points are memorized one by one. For construction management, I suggest that you have a snack on the key and difficult points, remember and read more, and you are not required to write it out in the examination room, but you must have an impression.

Do more high-quality exercises to avoid losing marks due to lax review.

3.Practice. Practical is a relatively difficult subject in the second-level construction engineer examination, and the practical examination is based on actual engineering, and there are many comprehensive contents during the examination. Professional engineering management and practice adopts the form of case questions, supplemented by the selection of questions, and comprehensively assesses the candidates' mastery of the basic concepts, basic principles, basic procedures and basic methods of engineering construction, as well as the ability of candidates to "flexibly use the knowledge they have learned and relevant laws and regulations to solve practical problems in engineering construction, so as to improve the level of candidates' comprehensive application of knowledge to solve practical problems". means, etc. In the process of studying, it is recommended that you spend more time studying this subject and do more exercises to consolidate your knowledge.

There are three subjects in the second construction examination, which are management, regulations, and practice. The difficulty of this course is relatively high, and it is recommended that the time allocation of these three courses is 2:3:

5. That is to say, practical learning should account for half of your total learning time, followed by 30% of laws and regulations, and the rest is management. Why is it so distributed?

1. "Construction Management", which is described with the core idea of "three controls, three management and one coordination", covers the cost, schedule, quality, safety and environment, contract and information of construction projects, with a wide range of content and knowledge. There are a lot of things that need to be memorized, but in fact, they are paper tigers, and the repetition of the exam is relatively large, and the system is strong, and the examination form is multiple-choice questions. For most candidates, as long as they review systematically, this subject is not difficult.

2. "Laws and Regulations", this is a course that is not closely related to engineering, if candidates take law courses in college, they will have a great advantage in learning the "Regulations" of the second construction. The scoring chapters of the Code are obvious, which are Chapter 1: Basic Legal Knowledge; Chapter 4:

engineering contracts and labor contracts; Chapter 8: Arbitration and Litigation, etc. You must listen carefully to the teacher and take notes in these chapters, and you can read the other chapters in passing.

In addition, the regulations also often examine the issue of time, and it is recommended that you summarize all the test points involving time, such as 3 days, 7 days, 15 days, one month, three months, one year, etc., from the front to the back, and then you can find out the rules, which is very convenient.

3. Practical subjects are the highlight of the second construction examination, involving six professional directions, candidates can choose one of them according to the actual situation for the examination, the total score is 120 points, each province sets its own score line, and the score line of each province is not the same.

The proportion of time allocated for the three subjects of the Constructor II examination.

Regulations: Management: Practice: 2:3:5

Therefore, you spend a lot of time on learning practice, and review public subjects in fragments, so you must take up more than 50% of your study time in practice, and if you don't have on-site construction experience, you have to focus on practice.

Then there is the public subject, first talk about the regulations, the law subject is the liberal arts to conduct the exam, many students are studying science and engineering, so to break through the liberal arts this kind of exam you need to have a standard of passing the score line in the study, and improve a little bit, but for practice, no matter how deep and thorough you learn, it is not too much, because on the one hand, you are passing the examination of this subject of management, and in addition, management is also in the four major case analysis questions in the second construction practice as a theoretical support, Management and practice are not separated, with such a ratio, what else do you need to do, and the next thing is the following learning preparation.

In the first round of review, follow the crowd to listen to the class, complete the review as soon as possible after class, and do some questions to adjust and adjust to ensure that what the teacher says is digested; If you can do that, it's enough to make you more than most people, because they don't review.

The second round of revision is very simple, but it is more important than listening to the lecture. After listening to a course, immediately start to do one or two past year questions, no closing book is required, and it is good to open the book. But be sure to force yourself to figure out which sentence on which page each question is being tested.

First of all, you must have a study plan, insist on studying for two hours a day, listen to lectures and read the secretary's notes, and secondly, you must find a reliable one, this online school can be physical or online. On the Internet, it is necessary to distinguish the true from the false, so as not to be fooled, you have to follow the teacher to learn on your own, and it is difficult to pass.

If you plan to apply for the second-level constructor exam, you still need to make a good review plan, arrange the time and subject learning order, which can greatly improve our learning efficiency

1.Time allocation:

Practice: Management: Regulations = 4:2:1

Practice must be the majority, management needs to memorize, and the law can rely on a part of life experience and language reading comprehension ability, so the time schedule of the law is the least. If your reading comprehension skills are average, you can increase the study time of the regulations appropriately. Adjust the study time reasonably, and the management and regulations can be passed, and a lot of time should be left for practice.

2.Sequence of study of subjects.

It is recommended to study the common subjects (engineering regulations, construction management) and then the practical part (according to the major).

Course learning sequence: foundation consolidation, intensive lectures, exercises, sprints.

Intensive lectures on brushing exercises, and exercises are practiced during the study of exercises with chapter exercises and past past questions.

Make a plan to prepare for the exam clearance, candidates can do questions through the exam 100 app - construction class 11 [second-level constructor] - question bank, including chapter exercises, daily practice, mock test papers, past questions, easy-to-make questions, etc., through the mobile phone anytime and anywhere.

Reading guide] the secondary constructor exam has a total of three subjects, including two major public subjects and one practical subject, although the content of the three subjects is equally critical, but the characteristics of each subject and the level of difficulty coefficient are very different, candidates should master the study of each subject and scientifically arrange the preparation time for each subject, in order to improve the efficiency of review, today I want to introduce to you is the relevant content of the time allocation of each subject of the secondary constructor exam, let's take a look at it specifically.

1. "Construction Management", the section takes "three controls, three pipes and one harmony" as the key concept to carry out their own descriptions, including engineering construction costs, progress, quality, safety and natural environment, contracts, and information content, with a variety of content and general knowledge. I saw that there are many items that must be memorized, but in fact they are paper tigers, and the test is more repeatable and targeted, and the examination method is multiple-choice. For the vast majority of candidates, if you want to prepare for the exam with system software, this subject will not be too difficult.

2. "Laws and Regulations", this is a course content that is not inseparable from the contact with the engineering project, if the candidates have the content of laws and regulations in the elective courses in the university, the study and training of the second construction of the "Regulations" will have great advantages. The list of scoring chapters of the Code is significant, and each chapter is Chapter I: Basic Laws and Regulations; Chapter 4:

Contracts and labor contracts; Chapter 8: Litigation Prosecution of These. These chapters must be carefully listened to by the teacher and take notes, and the table of contents of other chapters can be read by the way.

In addition, policies and regulations often examine the problem of time, and it is proposed that everyone summarize all the test points related to time, 3 days, 7 days, 15 days, a month, three months, and a year.

3. The practical discipline is the top priority of the second construction examination, and there are six technical majors involved, and the first students can choose one of them to carry out the examination according to the specific situation, with a total score of 120 points, and each province and region sets its own admission score line, and each province and region has a different admission score line.

Two construction test three, each is management, regulations, practice, the difficulty coefficient of practice is higher, it is proposed that the time allocation of these three courses is 2:3:5, in other words, the practical learning should account for half of all your learning and training time, followed by 30% of the regulations, the rest is management, success is for those who are prepared, the review link can follow the learning plan to carry out the review, do not rush, swallow dates, at this stage to do is still to actively prepare for the exam, According to the 2020 Constructor II exam study suggestions, develop your own review and preparation plan, more about the preparation for the Constructor II exam, exam preparation skills, news and other content, welcome to pay attention to Global Quick Ask in time, or go directly to the global online school for corresponding course learning, many free resources for you to choose.