How to set the temperature of the laser cutting machine chiller?

How to set the temperature of the laser cutting machine chiller? You can contact the manufacturer, different manufacturers have different settings, I hope it can help you.

CW3000 air-cooled can't be set up.

The CW5000 and above are all set to a temperature difference that controls how many degrees below room temperature.

How to set the temperature of the laser cutting machine chiller? Cool Times CS-ACC-H700 series laser chiller temperature setting method:

The display screen of the laser chiller adopts capacitive touch buttons, and the main functions include power on and off operation and setting the water temperature in the water tank. The buzzer will make a short "drop" sound when the key touch is active, and it will not react when the touch is invalid.

1. Press and hold the "ON off" button for 2 seconds to complete a power switch.

2. Press and hold the "set" button for 2 seconds to enter the setting interface, at this time, the temperature setting area on the display screen will display "set f0", and then click the "set" button every time, the area will display "set f0", "set f1", "set f2" three kinds of logos in a loop. "set f0" indicates that the target temperature can be set at this time; "set f1" indicates that the high temperature alarm value can be set at this time; "set f2" indicates that the low temperature alarm value can be set at this time. In any of the settings interfaces in "Set F0", "Set F1", and "Set F2", press and hold for 2 seconds to restore the display to its normal display state.

If you stay on the settings screen for more than 10 seconds without any button operation, the display will also return to its normal display state.

3. The "up" button is valid when setting the interface. When in the "set f0" interface, click this button to increase the set temperature, press and hold for more than 2 seconds, the set temperature will increase continuously, the maximum value is 35; When you are in the "SET F1" interface, click this button, the high temperature alarm temperature difference value will increase, press and hold for more than 2 seconds, the high temperature alarm temperature difference value will increase continuously, and the maximum value is 10. When you are in the "SET F2" interface, click this button, the low temperature alarm temperature difference value increases, press and hold for more than 2 seconds, the low temperature alarm temperature difference value increases continuously, and the maximum value is 10.

4. The "down" button is valid when setting the interface. In the "set f0" interface, click this button to set the temperature to decrease, press and hold for more than 2 seconds, the set temperature will decrease continuously, the minimum value is 10; When you are in the "Set F1" interface, click this button, the high temperature alarm temperature value decreases, press and hold for more than 2 seconds, the high temperature alarm temperature difference value decreases continuously, and the minimum value is 0. When you are in the "Set F2" interface, click this button, the low temperature alarm temperature difference value decreases, press and hold for more than 2 seconds, the low temperature alarm temperature value decreases continuously, and the minimum value is 0.

Good afternoon, dear, and I'm honored to answer your <>

The temperature setting of the laser chiller is between 15 and 25. The method of setting the temperature is:1

2.Consider the environment in which the laser chiller will be used: The environment in which the laser chiller will be used is also a factor that determines the temperature setting, such as room temperature, relative humidity, air circulation, etc.

In the hot summer, the room temperature will be relatively high, and the temperature needs to be set in a low range to ensure the stability and safety of the laser. 3.Consider the power and time of use of the laser:

The more powerful the laser, the more heat it will generate when used, requiring a lower temperature setting. At the same time, prolonged use will also cause the temperature of the laser chiller to rise, and the temperature setting needs to be adjusted accordingly. 4.

Adjust the temperature setting of Zen Ming: After determining the optimal working temperature range and considering the use environment, power and time of use, the temperature of the laser chiller can be set within a suitable range, and the temperature can be set between 15 -25. The temperature setting of the laser chiller needs to be adjusted according to the specific situation, and care and maintenance need to be paid attention to to ensure the stability and longevity of the laser.

I hope mine can help you

Summary. Hello dear, first, the reason for the heating up of the cold water tank of the laser cutting machine: 1. When working, the ambient temperature is high.

2. If the continuous working time is too long, it should be turned off and rested appropriately. 3. The inlet and outlet pipes of the pump are too dirty, the water protection device is blocked, and the water flow is not smooth. 4. The working light intensity is too high.

5. The reflux of the cooling water outlet pipe is abnormal, resulting in poor water flow.

Hello dear, first, the reason for the heating up of the cold water tank of the laser cutting machine: 1. When working, the ambient temperature is high. 2. If the continuous working time is too long, it should be turned off and properly rested.

3. The inlet and outlet pipes of the Jianqin water pump are too dirty, the draft of the water protection device is missing and blocked, and the water flow is not smooth. 4. The working light intensity is too high. 5. The reflux of the cooling water outlet pipe is abnormal, resulting in poor water flow.

2. How to solve the problem of high water temperature of the laser cutting machineDuring the working process, the laser cutting machine needs a large amount of water to cool the high temperature inside the laser tube to ensure the normal use and service life of the laser tube. However, when the laser cutting machine is in normal use, the water in the cooling water tank is prone to high temperature, especially in summer, it will get hot in less than 2 hours. If not replaced in time, the power of the laser tube will be greatly reduced.

You can find another regular bucket and prepare two double-ended ones. When the bucket is filled with cold water, you're ready to get to work. When the water temperature is high, take the working water pump out of the bucket with high water temperature and put it into another bucket of cold water to continue working.

When the water temperature in one bucket is high, the water in the other bucket has basically cooled into cold water. Then put the water pump into this bucket, and the problem of high water temperature of the laser cutting machine can be solved by Qizhong, and there is no need to pay the cost of repeated replacement of Minsheng. If you feel that this is more troublesome and you need to stop and replace the water pump and affect your production, you can buy a special laser cooling water tank, a refrigerator with a compressor, and cool the hot water at work to the set temperature.

The temperature setting of the laser chiller will vary according to the different laser model, the use environment and the amount of power that needs to be cooled. In general, the temperature of the chiller should be set above the minimum temperature required for the laser, and the flow and pressure of the chilled water should be stable. Generally speaking, the temperature of the laser chiller is set between 15 and 25.

If the temperature of the chiller is too high, it will reduce the cooling effect, resulting in damage to the laser, and if the temperature is too low, it will be prone to condensation. In order to ensure the normal operation of the laser, it is necessary to regularly check the temperature and flow rate of the chiller and make appropriate adjustments.

Laser chiller temperature setting.

The temperature setting of the laser chiller will vary according to different laser models, the use environment and the amount of power that needs to be cooled. In general, the temperature of the chiller should be set above the minimum temperature required for the laser, and the flow and pressure of the chilled water should be stable. Generally speaking, it is more appropriate to set the temperature of the laser chiller between 15 and 25.

If the temperature of the chiller is too high, it will reduce the cooling effect, resulting in damage to the laser, and if the temperature is too low, it is prone to pin plexus condensation. In order to ensure the normal operation of the laser, it is necessary to regularly check the temperature and flow rate of the chiller and make appropriate adjustments.

Benefits of Laser Chiller Temperature Setting:1Maintain laser stability:

Lasers need to be stable and not affected by temperature. The temperature setting of the chiller can control the temperature of the laser to ensure that it works stably within a safe range. 2.

Improve the life of the laser: The operating life of the laser depends on its operating temperature, and the temperature that is too high or too low will affect the life of the laser. The correct chiller temperature setting can extend the life of the laser.

3.Improve the quality of material processing: The processing quality of lasers is greatly affected by temperature.

When the temperature of the laser is too high or too low, the processing quality will deteriorate. The correct chiller temperature setting can ensure the stability and consistency of the laser processing quality. 4.

Energy saving: Reasonable temperature settings can reduce the power consumption of the chiller, thereby saving energy. At the same time, reducing power consumption can also reduce the operating costs of the equipment.

Pro, the high pressure is 14-17MPa, and the low pressure is, when the suction pressure is lower than 2MPa, it is said that the pressure of the chiller of the Shanming laser cutting machine is too low, which will lead to low pressure protection, resulting in a decrease in air return, a decrease in refrigeration capacity, and an increase in energy consumption; When the pressure is higher, it means that the pressure of the laser cutting machine chiller is too high, and the compressor is protected by the switch and stops running. Therefore, do a good job in the pressure protection of the laser cutting machine chiller, when there is a high pressure or low pressure failure, you should stop the operation in time, check the cause of the failure, and contact the after-sales personnel of the laser cutting machine chiller manufacturer to deal with the problem.

In the laser industry, the importance of laser chillers for laser equipment is self-evident. This is because choosing the right laser cooling system can greatly improve the service life and processing accuracy of the laser, and maximize the performance of the laser machine. Otherwise, if you choose a bad laser chiller, it is likely that you will not be able to accurately protect the laser equipment used, which will directly affect the life of the laser.

Methods for selecting chillers for laser equipment:

1. Refrigeration capacity

That is, the refrigeration capacity of the laser chiller. According to the photoelectric conversion efficiency of the laser equipment, the heat generated by it is calculated, and then the appropriate laser chiller is selected. Different types of laser chillers will also be different in this aspect, users can choose reasonably through some different calculation methods, if users are not very familiar with this aspect, they are also welcome to consult the professionals of the Kuling era.

2. Temperature control accuracy

This index comes completely from the requirements of the laser, and the temperature control accuracy must be for the semiconductor laser, which requires the compressor to predict the temperature and guess the change law and adapt to the change of load, which is generally impossible to do with the water cooler with the integrated temperature control module. Of course, for CO2 lasers, the temperature requirement is 2 to 5, which can be achieved by most special water coolers on the market. However, the Kuling era is currently one of the few laser chillers that has achieved true regret and correction.

3. Water flow rate and booster pump head

The refrigeration capacity represents the refrigeration capacity provided by the compressor, and the water flow represents the ability of the chiller to take away the heat, which causes the phenomenon that we often see: the chiller with a nominal cooling capacity of 1000W is connected to an 80W glass tube, the chiller shows 25, but the laser tube is hot; In fact, it did not play a role in the application.

4. Thermal efficiency and water volume

In general, the bigger the tank, the better, but the design of different compressors will be very different. This is the same compressor cooling capacity and water volume, and the operation control with PID feedback function will greatly improve the cooling capacity of the overall system.

5. Water quality requirements and materials of water filtration and water circulation system

This composite metric is often overlooked, but it is very reused and has a direct impact on the lifetime of the laser. Like many unfiltered chillers, direct tap water or the use of pure water that has not been replaced for a long time will cause the breeding bacteria and impurities to be deposited on the laser, affecting the life and use effect of the laser.

It can be seen that the correct selection method of laser chiller can greatly improve the service life and processing accuracy of the laser equipment, and give full play to the performance of the laser equipment.

The application of industrial chillers covers many industries such as laser cutting, laser welding, engraving, UV printing, laboratory and medical. The chiller manufacturers on the market are also uneven, how should we screen the chiller manufacturers?

First, look at the scale of production.

With its own production line, large-scale production manufacturers, its products are used in various industries, withstand the test of practical applications in various industries, and its product quality is also guaranteed, so there will be such a large sales volume;

Second, look at the research and development capabilities.

A manufacturer should have its own core technology and R&D team. The market continues to push through the old and dig out the source of innovation, the chiller will also have product changes, with the technical team to keep pace with the times, research and development of the chiller suitable for market demand;

3. Product testing.

It is very important that the product is delivered to the customer after the comprehensive inspection is completed, which guarantees the quality of the product and avoids the delivery of unqualified and defective products to the customer;

Fourth, the product is complete.

The product model is complete, which can meet the refrigeration of many types of industrial equipment, and it is also the embodiment of the high productivity of Leng Jingsan water purifier manufacturers.

5. After-sales service.

The people who use the chiller are not necessarily professionals, and when they encounter a failure, they will generally need the help of the manufacturer. If the after-sales service is not timely, it will affect the use of the chiller and delay production.