How to get windows 7 and XP to share the Internet 20

Only switches, no routers. Is it to be dialed? Is it equivalent to only two computers set up LAN Internet access?

If so, try the following method. I've only tried two XP systems though. But I think win7 should be similar.

1: Set a computer IP as gateway and tick the broadband connection, attributes, and sharing in the network connection.

2: Set the IP of another computer as the gateway and tick the broadband connection, attributes, and sharing in the network connection.

That's generally OK at this point, but be careful. Some people loaded 360will turn off XP's firewall service. You have to change it back in the boot of the 360. But it doesn't matter if the firewall is on or not.

Supplement. It's easiest to get a router. It's not expensive.

Upstairs is not right, if your network does not need dial-up, you don't need a router at all, the router is an extra dial-up switch. There is no need to set anything on the switch, all the holes are the same, and the router needs to be set, and the settings for dialing and not dialing are different. You directly connect both computers to the switch, and the switch is connected to the Internet.

Networking has nothing to do with whether the operating system is Win7 or XP.

The network control of Win7 is different from WinXP in that it is automatic and integrated. The latter is managed independently. Now the route is not expensive, it is recommended to buy a route. Because switch sharing is quite replicable to use.

Sir, a switch is something that turns one hole into multiple holes without setting this statement.

For example, my roommate and I both use the telecom network in the dormitory, and the telecom only has one connector, so the switch needs to turn one hole into multiple holes, so everyone can use it.

Win7 Ultimate can share files with XP systems or share LAN, but there are certain restrictions.

Win7 Ultimate can only be a 32-bit system, and a 64-bit system cannot be implemented at present.

LAN environment, Win7 Ultimate and XP system must be in the same workgroup, otherwise the two computers can not communicate, that is, it is impossible to achieve file sharing and network sharing.

To implement network sharing, you must specify a host, select a shared folder, and enable the function of folder sharing (note that some antivirus software disables file sharing by default, in this case, you also need to enable this function in the antivirus software).

File sharing operation under win7 system.

For installation, a home or work environment is generally chosen.

1. Network Discovery: Check "Enable Network Discovery";

2. File and printer sharing: Check "Enable file and printer sharing";

3. Public folder sharing: check "Enable sharing so that users who can access the network can read and write Chinese files to public folders";

4. File sharing connection: Check "Enable file sharing for devices that use 40-bit or 56-bit encryption";

5. Password-protected sharing: Check "Cancel password protection";

6. Homegroup connection: Check "Allow Windows to manage homegroup connection".

XP file sharing operation.

Open My Computer - Tools - Folder Options - View.

Cancel the checkmark in front of Simple Share and click Apply.

It's a printer, not an XP system.

Step 1: Synchronize Workgroups Regardless of the version of Windows operating system you are using, the first step is to make sure that the workgroup names are the same across all computers connected to the network.

To view or change information such as a workgroup, computer name, and so on for a computer, right-click Computer, and then select Properties.

If you need to change the relevant information, click Change Settings in the "Calculation and Filial Piety Computer Name, Domain, and Workgroup Settings" column.

Click Change.

Enter the appropriate computer name After the workgroup name, press OK.

Once this step is complete, restart your computer for the changes to take effect.

Enable Network Discovery, File and Printer Sharing, Public Folder Sharing; For the "Password-protected sharing" section, select "Turn off password-protected sharing".

Step 3: Shared with Audience Settings Now, let's turn to the shared audience. The most straightforward way is to drag and drop the files you want to share folder directly into the public folder.

If you need to share some specific Windows 7 folders, right-click the folder and select Properties.

Click on the "Sharing" tab and click on the "Advanced Sharing" button.

After checking "Share this Wu Zheng folder", click "OK" to exit.

If a folder is set to shared, all of its subfolders will be set to shared by default.

In the previous step 2, we've turned off password-protected sharing, so let's make some changes to the security permissions for shared folders. Right-click the folder you want to share and select Properties. On the Security page, click

Next, click the "Add" button.

Type everyone, check the name, and press OK all the way to exit.

Select "everyone" and select the corresponding permissions to be given to everyone in the permission selection column.

Step 4: Firewall Settings Open Control Panel System & Security Windows Firewall Check the firewall settings to make sure that File & Printer Sharing is allowed.

Step 5: View shared files Open Control Panel, Network & Internet, View Network Computers & Devices, and Corresponding Computer & Device Name.

First of all, the slag is to open the guest user, and then in the local security policy, select the permission assignment of the comedite user in the local policy, and delete the guest user who denies access to the computer from the network.

Nowadays, when personal computers have become very popular, it is not a luxury to have several computers at home, such as desktops, laptops, and tablets. Brother Silver and because of the different groups of users, or the previous computer, the system is not the same, some people like XP, said that it has been used for a long time, of course, some people like win7, like "advancing with the times". This can't avoid the operation of sharing files, for example, win7 that machine ** movie XP machine does not have or a file needs to be transferred between two machines, file sharing is a good solution to the problem.

Tools Raw materials.

One XP computer and one Win7 computer.

A router.

Win7 system computer settings.

Start by opening the "Computer" properties and clicking "Change Settings" next to "Computer Name, Domain, and Workgroup Settings".

You can write the description of the computer casually, click "Change" as shown in the figure, you can change the name of the computer you want, and the following "Working group will have to remember, it will be the same as the XP system for a while, here mine is" domain"and OK.

EndXP system computer settings.

In the pop-up "System Properties" dialog window, select the "Computer Name" tab, the computer description can also be written casually, click "Change", the computer name can also be written casually, as long as you identify which machine it is, the working group will be the same as the win7 just set, that is, "domain".", click OK after changing it, as shown in the image.

This step should be explained that (because I didn't take a screenshot in time at the time, this screenshot was taken from another computer) the first time you share a file, you need to click "If you know.........Only then can it be set up further, as shown in the image.

Then you can check "Share this folder on the network", the following one depends on the situation, if it is used by yourself, then the check is nothing, as shown in the figure, and finally click on the application to OK.

After everything is set up, click "Online Neighbors" > "View Workgroup Computers" to see the computers of the workgroup you are in.

Then you just have to click on the computer you have already shared and go in and copy the file you want.

The computer operated by the XP side cannot be copied directly by dragging and dropping, and the dragging is just a shortcut, which needs to be right-clicked to copy, and then pasted.

Step to read. end

Precautions. It is recommended that two computers be connected to the network with wires, and the transfer speed will be very fast;

Must router, wired and wireless can be, as long as you usually have two computers can access the Internet, you can set up a slide and set file sharing.