I want to change Windows 7 to XP sp3, the master will teach me

You start by finding an XP SP3 disc.

Then put the useful stuff in the C drive on the other drive.

Put it like a disc reboot.

Then, when the system installation screen appears on your computer, select the first one.

Install the system to the first partition of the hard drive.

And then just wait, it's fully automatic and doesn't have to move you.

The system will be installed automatically, and the sound and LAN drivers will be installed automatically, so you don't have to worry about anything.

If you use Broadband My World to access the Internet, first put the installation files of Broadband My World to other disks.

If you can't access the Internet normally, just install it, but you don't usually need it) If you don't have an XP SP3 CD, you can sell the computer or repair the computer, then buy one for a few dollars.

Then load the system just under it.

Then, open my computer, you can see the loaded virtual drive, open it directly, open the system installation file, and also select install the system to the first partition.

Explained in detail ! You should be able to understand it! Just do the system and cover win7 directly!

Go buy a CD-ROM to start winxp (5 yuan to get it), insert it into the CD-ROM drive, restart the computer, and follow the steps.

Click on a file, right-click, Properties, Compatible, select XP SP3 from the drop-down list, and make sure it can be used with XP compatibility.

Win7 Steps to Modify Compatibility Mode to XP SP3:

1. Select a program, right-click and select properties;

2. Select the compatibility tab, check the box to run this program in compatibility mode, select Windows XP (Service Pack 3), and click OK.

Right-click the attribute and select the compatibility tab, check Run in XP compatibility mode, and click OK.

Format the entire disk and reinstall the system!

a.Make a backup of all your computer's important files first.

b.Confirm which drives your computer is using, such as graphics cards, network cards, sound cards, and so on.

Installation. --Phase 1--

1.Put the Windows XP SP3 disc into the CD *** slot.

2.Restart your computer. (Wave your hand at Windows 7 at the same time, hehe).

3.When the message Press Any Key to Boot from CD appears, press Enter.

4.Once you have reached the main installation screen of Windows XP, press Enter -> press F8.

5.Delete the existing C-slot and create the new C-slot. Choose quickly.

6.Format NTFS quickly

7.Once the installation files have been copied, the computer will automatically restart and proceed to the next stage.

Stage 2 - 1When you arrive at the first interview window, enter your name and company name. (Click Next).

2.Enter the serial number. (Click Next).

3.Select a time region. (Beijing, China).

4.Windows XP will continue to install.

5.When you get to the second question window, just click Next.

6.> << is being installed

7.After about 10-20 minutes, the screen will go black and the computer will automatically restart again, entering Stage 3

Stage 3 - 1Click OK.

If you want to use the default administrator account, restart your computer manually. ）

3.Enter your username and password.

4.Select whether you want to turn on Windows automatic updates.

5.After clicking Next, the system will initialize and you will be taken to the desktop.

6.Installed!

Remember! Windows must be activated within 30 days of installing Windows XP, otherwise it will no longer be available.

Note: This tutorial is based on the retail version of Windows XP SP3. If the user is using the large corporate version of Windows XP SP3 Professional, there will be no "Enter Serial Code" window.

Put the disc to the optical drive, press the delete key when booting, find boot, and set firstboot to cd. Press F10 and the machine restarts. Well, what do you see?

Format the disk where Windows 7 is located. Or repartition. And then you get the idea.

Finally, I highly recommend you to stay on Windows 7Install a dual system, install the XP as well, and the hard disk has space left anyway.

The disc has an automatic one, after setting the disc to start, confirm that the disc is booted, and then follow the prompts on the line, what problems do you encounter, and then ask,

Of course, it's ghost xp sp3 Why is he called xp?,Another person thinks there's nothing wrong with pretending to be pirated.,Because the genuine one is too expensive.,Judging from China's economic level.,Can't afford it.。

Is Ghost XP SP3 a Window XP?

Is it if piracy has an impact on the system?

It doesn't matter.

Can I install an operating system? Yes.

Yes, most people use this, rest assured.

Ghost XP refers to Windows XP that uses Ghost software to make a compressed package, commonly known as clone XP. It is pre-installed xp to make a ghost file. The advantage is that the installation is fast.

The full English name of SP is Service Pack, that is, the patch package of the Windows operating system. SP3 is the third patch pack for Windows XP Like SP2, SP3 is a patch upgrade package, and the biggest task of XP SP3 is to summarize the patches of various updates that have been released since SP2 was released.

The difference between the ghost system and the installed version of the system is as follows:

1. The original disk installation method takes a long time, and the ghost version can basically be installed in about ten minutes.

Second, after the installation of the original XP disk, the probability of problems (such as blue screen) in the later installation of the original hardware driver will be much smaller. However, most of the ghost versions integrate most hardware drivers, and if the hardware is wrong, XP will use an incorrect driver to install it, resulting in an increased chance of XP blue screen.

3. XP original installation can be said to be a completely pure system. Most of the ghost-encapsulated XPs on the Internet integrate some software classes, and there are many streamlined and optimized functions and software that not everyone likes to use.

Of course, it's the ghost version, fast, that is, the XP system is installed and packaged with ghost, and it will be very fast when it is installed, and now that XP has been used for so many years, it's no problem at all, rest assured.

To be honest, there is no need for a tutorial at all, and if you want to completely reinstall it, format the C drive cleanly.

Stuff the disc of win7 into it, and just go all the way. Microsoft makes products that are user-oriented and don't make things that complicated. It's not to engage in unix, linux or anything like that, it's not that troublesome.

There's nothing to pay attention to Actually, what are you using to pack it? U disk There is a U disk in the next Rubik's Cube to start, just do it.

Note that it is to back up the computer's drivers, especially the network card.

Do you want to completely reinstall it, or do you want to have a dual system?

If you want to convert from Win7 to XP, follow the steps below.

1、Use any Windows system installation disk,Or Ghost installation disk,Format the drive where your existing system is located,The following example is shown in the win7 system installation disk,If you start with a disc boot,There will be an advanced setting in the black box position,There can be formatting options。

2. Perform one-click installation of XP Ghost again, or use the XP system installation disk to install.

Is it a laptop or a desktop? What is the BIOS. The inability to start is related to many configurations of the machine.,It should be caused by the fact that the machine that does the ghost is different from your current machine configuration.。 Therefore, it is recommended that you find someone professional to complete this job.

Try to change the system disk, it may be a problem with this system disk.

BIOS to set the disc to boot, try it to work.

You have to format the original C drive with PE and then install it in PE.

You may also need to set up disc boot in the BIOS.

If your computer is Win7 from the factory, it is not recommended that you install XP. Because the bearing capacity of XP is too weak, it is easy to cause the computer temperature to be too high. It's not the above problem, put the system disk into the optical drive and boot it directly, there are installation options on it.