The wifi at home is full but it can t be used?

There are several reasons why I can connect to wifi but can't

1. The wifi itself is a problem, the wifi may not be connected normally, resulting in the inability to access the Internet;

2. Router problems, the router may be overheated or damaged;

3. There may be broadband arrears, resulting in inability to access the Internet;

4. The wifi name contains Chinese, resulting in some computers unable to connect to the Internet;

5. Computer system problems, there may be problems with the system, resulting in connecting to wifi but unable to access the Internet.

Suggested workaround:

1. Use other mobile phones or devices to connect to wifi to try whether you can access the Internet and rule out the problem of wifi itself;

2. Restart the router to try, or restore the router to factory settings, then dial up the Internet again, and reset the wifi according to the setup wizard, or change to a new router and dial up to connect to the Internet;

3. Contact the broadband customer service to confirm whether the broadband is abnormal, such as arrears, recharge the broadband, and then dial up the connection;

4. If the wifi name contains Chinese, it is recommended to modify it to English or a combination of English and numbers before connecting;

5. If the above reasons are ruled out, it is likely to be a computer system problem for a long time, and it is recommended to restore the factory settings. See if that solves the problem.

Whether you can't connect to wifi or can't connect to the Internet, whether it's one device or multiple devices, whether you have a wired connection, try it.

Cat or broadband problem, turn off the power, and then turn it on.

It should be available if you are in arrears. It's costly

The wifi signal at home is obviously full, but there is no Internet access, so the problem is here.

My family was like this on the second day of the Lunar New Year, because of the snow.

If you are using a Huawei phone and can connect to Wi-Fi but cannot access the Internet, you can use the following methods to troubleshoot the problem:

1. If you are using a public network:

1.Try using it in a place with a small amount and confirm that the hotspot is working properly.

2.Please check if you need to log in through a browser** to register before you can access the Internet.

2. If you are using a home network, it is recommended to connect to other WiFi or mobile phone personal hotspots for testing and troubleshooting

1.If connected to other wifi is normal.

1) Please do not stay away from the router;

2) Please check whether the broadband account expires, restart the router and restart the phone before trying;

3) If the router has been set to the black and white list, you need to check whether the MAC address of the mobile phone is added to the router side, if the router does not set the black and white list, please power off the router and restart the attempt.

2.If you connect to other wifi, you can't get online.

1) Please turn the WLAN switch back on and try to connect;

2) It is recommended that Kai Cover search for and restore the network settings in the settings, and restore them according to the on-screen prompts. (Note: This restores the Wi-Fi, mobile data, and Bluetooth connection records and deletes the Wi-Fi and Bluetooth connection records).

3. If individual applications are not available online:

Please open Settings, enter Traffic Management in the search box above and click to enter the Traffic Management page, click Application Networking, and check whether the WLAN permissions are checked for individual applications.

If the problem persists, we recommend that you back up your data (third-party apps such as QQ and WeChat need to be backed up separately) and bring your purchase voucher to the Huawei Customer Service Center for testing. Staring.

Boarding service. Make an appointment for service.

Repair spare parts** inquiry.

1. Check whether there is any arrears. After payment, restart the modem router. 2. Check the light modem.

If the optical modem flashes and grinds the red light to infiltrate, please plug in the optical fiber head of the household. 3. If the red light still does not go out, please report the fault through the help column of "China Unicom Customer Service". 4. Check the router.

Confirm that the router indication class is normal, if there is a problem with the router, you can turn it off for a few minutes and shout again. 5. Plug in both ends of all wires, and turn on the power supply after all devices are powered off for a few seconds.

You see that the wifi signal on your mobile phone looks like a full signal, it is indeed not connected to the network, and the wifi signal is strong and may not be able to access the Internet, which is a very big "deception" to people.

Because you are accessing the signal from your router, if the network from this router to telecom is not connected at all or the router is dead, this signal has no effect at all.

You can first check the router you sell to the royal home,See if there is a red indicator light from the optical modem from the telecom equipment,That is, whether the indicator light of the "light signal" is red,If it lights up the red light,It's basically the optical fiber of the telecom optical distribution box to your home is broken,You can only ask the telecom maintenance personnel to deal with it。

If this "light signal" indicator is a normal green light, you can power off the router and turn it on again, and the general problem will be solved.

There are a few possible reasons why your home Wi-Fi is full but not connecting. Here are some common causes and solutions to Liang Zhaozhi:

Incorrect password: Please confirm that the Wi-Fi password you entered is accurate. Passwords are case-sensitive, so make sure you enter them correctly.

IP address conflicts: If you have multiple devices in your home connected to the same wireless network, IP address conflicts can occur. Try restarting your router and device, or set your device's IP address to get it automatically.

Router issues: There may be some issues with your router like outdated firmware, overloaded, or faulty. Try restarting your router, or check and update your router's firmware.

Signal interference: Other surrounding electronic devices, electronic devices, microwave ovens, Bluetooth devices, etc., may interfere with the wireless signal. Minimize the use of these interferers, or place the router far away from them.

Distance issues: Signal strength may be weakened due to distance. Try using a signal extender close to the router or in a large area of the room to enhance coverage.

If you still can't solve the problem after trying the above solutions, it is recommended that you contact your Internet Service Provider or WebLink Technical Support for further help and guidance.

There are several reasons for this.

If the network settings of the device are incorrect, such as the DNS is polluted, try to reset the network settings of Luxiao and then connect to the Internet1;

If the connection between the wireless router and the external network is interrupted, check whether the network cable of the WAN port is disconnected, and reconnect to the land and reconnect the town1;

If the current broadband is in arrears or invalid, you need to pay the fee again before you can connect to the Internet normally.

A full WiFi signal does not necessarily mean that there is a network speed, it may be because the network cable and router are not plugged in2;

If the device is disabled or the speed is limited, you can enter the router background to modify3;

If the WiFi network itself is not connected to the Internet, it may be a broadband failure, a WiFi setting problem, or a line connection problem.

If you are using a Huawei phone and can connect to Wi-Fi but cannot access the Internet, you can use the following methods to troubleshoot the problem:

1. If you are using a home network, it is recommended to connect to other WiFi or mobile phone personal hotspots for testing and troubleshooting

1.If connected to other wifi is normal.

1) Please do not stay away from the router;

2) Please check whether the broadband account expires, restart the router and restart the phone before trying;

3) If the router has been set to the blacklist and whitelist, you need to check whether the MAC address of the mobile phone is added to the router, if the router does not set the blacklist and whitelist, please power off the router and restart the attempt.

2.If you connect to other wifi, you can't get online.

1) Please turn the WLAN switch back on and try to connect;

2. If individual applications cannot access the Internet:

Please open Settings, enter Traffic Management in the search box above and click to enter the Traffic Management page, click Application Networking, and check whether the WLAN permissions are checked for individual applications.

If the problem persists, we recommend that you back up your data (third-party communication apps need to be backed up separately) and go to the Huawei Customer Service Center with your purchase voucher for testing.

1.Whether the external network is normal or not, you can check the Internet access status from the front of the router.

2.Check the router settings, including broadband password, wifi password, and Internet access, etc., and reset the router if there is a problem.

3.Whether the modem is normal, especially whether the optical fiber interface is reliably connected, can be judged by observing the status of the modem.

4.Contact the service provider ISP to inquire about the status of the network and, if necessary, ask the service provider to come to your site.

If there is a big problem, or the equipment is faulty, the external network is not connected, etc., you need a service provider to provide services.

What is the reason why the mobile phone wifi signal is full but cannot access the Internet?

This is sometimes the fault of the router, just restart the router.