-
Anonymous users2024-02-06Check first to see if it is a problem with the wifi itself, it is possible that the wifi is not connected normally and the Internet cannot be accessed.
Second, see if it is a router problem, maybe the router is overheated or damaged.
It is also possible that the broadband bill is in arrears, resulting in the inability to access the Internet.
The wifi name contains Chinese, which makes some mobile phones unable to connect to the Internet.
The system problem of the mobile phone may be that there is a problem with the system, resulting in the connection to the wifi but the inability to access the Internet.
Solution: 1. Use other mobile phones or devices to connect to wifi to try whether you can surf the Internet.
2. Then restart the router to try, or restore the router to factory settings, then dial up the Internet again, and reset the wifi according to the setup wizard, or change to a new router and dial-up to connect to the Internet.
3. You can also contact the broadband customer service to confirm whether the broadband is abnormal, such as arrears, recharge the broadband, and then dial up the connection to try.
4. Because the wifi name contains Chinese, it is recommended to modify it to English or a combination of English and numbers before connecting.
5. If the above reasons are ruled out, then it is likely to be a problem with the mobile phone system, it is recommended to restore the factory settings or flash the phone to see if it can solve the problem.
-
Anonymous users2024-02-05Here's why:
1. The SSID and password of the router are incorrect. Reconfigure the wifi on the app, enter the correct ssid and password, don't enter the wrong here, the main case distinction and space, make sure the wifi name and password are correct. As shown in Fig
2. The frequency band of the router is not supported. Check if your camera model only supports signals or dual-band. Only supported, you need to connect the camera to the wifi of the router's frequency band.
Too far away from the router and poor signal. To set up a connection to wifi, it is best to put the camera and router in the same room, 2-5 meters away, to ensure that the camera can receive a full signal.
3. The antenna of the camera receives the signal poorly, if it is the model of the external antenna, make sure that the connection at the antenna interface is firm. If it is a model with a built-in antenna, you can try to factory reset the machine and put it closer to the router to try to connect to the wifi again.
4. The router is equipped with wireless MAC address filtering, this setting can block the connection of network devices that are not in the whitelist, if you want the camera to connect smoothly, you need to temporarily turn off the MAC filtering, or add the MAC address of the camera to the whitelist in advance.
5. Router compatibility issues. If another router can be connected smoothly, it means that there is a compatibility problem between the camera and this router, and you need to change a compatible router to connect to wifi.
If the channel congestion may cause the wifi to be unconnected, you can try to modify the channel of the router, you can try channel 1, 6, or 11 to solve the problem.
-
Anonymous users2024-02-04EZVIZ CS-C2S-21WPFR can't connect to the wireless network What's the situation.
Scan *** to bind, search can not add can not be added, please **upgrade file upgrade file click advanced configuration, then click system maintenance, select ** upgrade file, click upgrade. Sit tight. ）
2: Click on the gear equipment management at the bottom left.
Three: Click Advanced Configuration.
Four: Click on the left network, then click on Wi-Fi to add wireless wifi, five: Finally, click on the lower right application to connect.
-
Anonymous users2024-02-03EZVIZ CSC5S3C2WFR can be connected to wireless, can also be connected to wired, Wi-Fi (network destruction refers to the line and wifi can choose one.)
Product Type: Network Camera.
Product function: infrared light.
Imaging device: 1" Progressive SC....
Effective pixels: No data yet.
Resolution: 1920*1080
Compression Format: Staring.
Product size: 110*51*213mm
Product weight: 595g
Main parameters Product type.
Network cameras.
Product features. Infrared light.
Product shape. Pistol.
Imaging color. Colored.
Hardware performance imaging devices.
1-inch Progressive Scan CMOS lens parameters. 4mm (horizontal angle of view 87°, diagonal 104°) 6mm (horizontal angle of view 54°, diagonal 62°).
8mm (horizontal angle of view 38°, diagonal 50°) Kaiyu Dynamic Detection. Resolution is supported.
Compression format. 50hz：25fps
60hz：30fps
Interface Parameters Network interface.
rj45 x1
Other parameters: Ingress protection level.
IP66 supply voltage.
dc 12v±10%
Power supply. 8w
Product dimensions. 110*51*213mm
Product weight. 595g
Ambient temperature. Working: -30-60
Ambient humidity. 95% (non-condensing).
*This is a Xiaomi S hardware test.
NAS O is sodium thiosulfate.
The chemical formula is also known as baking soda. >>>More
Dear Telecom users, Hello! According to your description:
The Xiaomi Mi 2S is a very well sealed phone and does not get into large particles of dust. >>>More
The MIUI system does not currently have this function, but it can be implemented by creating contacts on the desktop to speed dial as follows: >>>More
I suggest that you wait for a few months to come out of the new machine note3, this is very powerful, screen, pixels, CPU, battery, etc., as well as the domestic 4G network by the end of the year, that is after buying it, you can do it, I hope it helps.