-
Anonymous users2024-02-06T5 and T6 are the codes for heat treatment of aluminum alloys. T5 - solution treatment plus incomplete artificial aging; T6 - solution treatment plus complete artificial aging.
1. Different heat treatment methods.
Aluminum profile 6061-T5: solution treatment + incomplete artificial aging.
Aluminum profile 6063-t6: solution treatment + manual complete aging.
2. The tensile strength is different.
Aluminum profile 6061-t5: tensile strength 160 MPa.
Aluminum profile 6063-T6: tensile strength 215 MPa.
3. The quenching treatment is different.
Aluminum profile 6061-t5: After extrusion, it is quenched by air cooling, and then transferred to the aging furnace to keep warm at about 200 degrees for about 2-3 hours. The hardness of the aluminum profile in this state is relatively high, and it has a certain deformation.
Aluminum profile 6063-T6: It is quenched by water cooling, and the artificial aging temperature after quenching will be higher, and the holding time will be longer, so as to achieve a higher hardness state.
4. The hardness is different.
Aluminum profile 6063-T6: hardness is HB90-95.
Aluminum profile 6061-T5: hardness is HB95.
-
Anonymous users2024-02-05What is the difference between 6063-T5 and 6063-T6 in aluminum profiles?
There are some slight differences in the state definition of the aluminum alloy of the two, T5 is natural cooling, the deformation coefficient is small, it has been controlled, and the hardness is average. T6 is water-cooled, with a large deformation coefficient, not easy to control, and high hardness. However, the difference between the two is not obvious for 6063 aluminum alloy, and the main difference is reflected in the mechanical properties.
In the scope of product use, T6 aluminum alloy is generally selected for high requirements in terms of strength and food stress. The requirements are not high, and the selection of T5 aluminum alloy is fine.
-
Anonymous users2024-02-041. The essence is different.
6063T5 aluminum profile is actually an aluminum alloy profile made of 6063 material, and 6063T5 refers to the state of aluminum alloy cooling in the ancient city of high-temperature forming and artificial aging. It is suitable for aluminum alloy products that are cooled by high-temperature forming, without cold working (straightening, leveling, and not affecting chemical properties) and artificial aging. Tensile strength (MPa) 160, yield strength (MPa) 110, hardness (hw), elongation 8%.
2. The nature is different.
6063T6 refers to the state of artificial aging after solution heat treatment, which is suitable for aluminum alloy products that are not cold-processed after cooling in the high-temperature forming process. Tensile strength (MPa) 205, yield strength (MPa) 180, hardness (HW), elongation 8%.
-
Anonymous users2024-02-031. "6063" represents the code of the alloy, original alloy or individual alloy with modified content of the main added alloying elements, content or impurity components.
2. "T5" represents the use of heat treatment technology.
When the aluminum alloy grade is named, the four-digit character system is the first of the grade.
The first, third and fourth digits are Arabic numerals, and the second digit is an English capital letter (except for the letters C, I, L, N, O, P, Q and Z). The first digit of the grade indicates the aluminium and aluminium alloy group. In addition to the modified alloy, the aluminum alloy group is determined by the main alloying elements.
-
Anonymous users2024-02-021. 6063 in the aluminum profile 6063-T5 is the grade of the aluminum alloy, and the 6063 aluminum alloy is a heat-treatable strengthened alloy with medium strength in the Al-MG-Si series, which belongs to the six series alloys in the aluminum alloy.
2. The T5 in the aluminum profile 6063-T5 is the classification identification of heat treatment, the first digit after the T word indicates the basic type of heat treatment (from 1 10), and T5 indicates that it is artificial aging after cooling from the molding temperature.
-
Anonymous users2024-02-016063-T6 series aluminum alloy refers to the high-quality aluminum alloy produced by heat treatment pre-stretching process, of which 6063 is the aluminum alloy model, and T6 refers to the heat treatment process. 6063 aluminum alloy is widely used in the frame of aluminum doors, windows and curtain walls in buildings, and is a common aluminum alloy model. Its magnesium and silicon alloy characteristics are many, and it has excellent characteristics such as excellent processing performance, excellent welding characteristics and electroplating, good corrosion resistance, high toughness and no deformation after processing, dense material without defects and easy to polish, easy to color film, and excellent oxidation effect.
Aluminum alloy: an alloy based on aluminum with a certain amount of other alloying elements added, which is one of the light metal materials. Aluminum alloy is divided into deformed aluminum alloy and cast aluminum alloy according to its composition and processing method.
Deformed aluminum alloy is to first melt and cast the alloy ingredients into billet ingots, and then carry out plastic deformation processing, and make various plastic processed products through rolling, extrusion, stretching, forging and other methods. Cast aluminum alloy is a blank that directly casts various parts and components with sand mold, iron mold, investment mold and die-casting method after smelting the ingredients.
-
Anonymous users2024-01-31Dear, hello, very high vertical number of Xing to provide you with the answer, 6060-t66 and 6063-t5 are common aluminum profile materials, their differences mainly lie in the following aspects: 1The chemical composition is different:
6060-T66 has a higher silicon content than 6063-T5 and contains small amounts of copper and magnesium, giving it better strength and corrosion resistance. 2.Hardness is different:
6060-T66 is slightly harder than 6063-T5 and can withstand pressure and weight better. 3.Different processing properties:
The processing performance of 6060-T66 is slightly worse than that of 6063-T5 due to the different chemical composition of the manuscript code, requiring higher processing temperatures and pressures. 4.Different uses:
Because 6060-T66 has higher strength and corrosion resistance, it is often used in industrial fields with high requirements, such as aerospace, automobile manufacturing, key construction, etc.; The 6063-T5 is suitable for general construction and home improvement. In general, there is not much difference between the two materials, and the specific choice needs to be decided according to the actual needs and the use environment.
Want to skip a ticket? Teach you to go to the toilet when he checks the ticket.
T5 should be better with ZAM!! Don't keep playing T5 FB. It's time to go to the T6 gangsters, the best shield is, of course, the D shield!
T5 is a little better, but T5 will be replaced sooner or later, and it is easy to get started without Magic Breath, so wear Demon Breath first, and then directly change to T6 or Summon.
Very good value for money. The quality is ok.
Sony NEX5T can only be compared with Fujifilm XA1,Compared with XM1, it's not a turn.,My SLR standby is Fujifilm XA1,The picture quality is a little better than NEX5T。 Let's talk about the machine first,Fuji and Sony's sensors are the same foundation,It's just that Fujifilm XM1 and the sensors of more advanced machines are improved with their own patents,Fuji's black technology directly leads to Fuji's picture quality is really good。 Speaking of lens accessories, Fujifilm does have few lenses, and the lens is very expensive, but who made Fujinon lenses a famous brand, and the quality of Fujifilm XM1's dog head is quite good in the factories; Sony's head is divided into 3 kinds,From the high-end to the low-end row are ZA head (Zeiss),G head (Minolta Golden Circle) and ordinary lenses,There are also two kinds of ordinary lenses,Dog head and high-end point,The ordinary head of the high-end point has good image quality,After all, the lens coating technology is Sony took its own sensor in exchange for Pentax,Although in exchange for Pentax decades ago technology,But this old technology Pentax claims to be the second in Japan, and no one dares to call it the first。 >>>More