Why does the windows XP system crash when it boots up and enters the windows reading bar interface?

Sweat The guide area is damaged

disk i/o error. replace the disk,and then press any key.After pressing the Enter key, boot failure, reboot and select proper boot device or insert boot media in selected boot device

And it can't boot Windows 98. How can I solve this problem?

Answer: The reason for this problem should be that the main boot sector on your hard drive is corrupted, causing the system to fail to boot. You can use the Windows 98 boot disk to fix the malfunction. Here's how:

1) Make a Windows 98 boot disk on another computer with Windows 98, or go to.

2) After booting up, press the Del key to enter BIOS Setup, select Start the computer from the floppy drive and press the F10 key to save and exit.

3) Insert the system boot floppy disk into the floppy drive and boot the computer, and use the fdisk mbr command to repair the main boot sector of the hard disk after booting normally.

4) Then use the sys a: c: command to transfer the system files to the hard disk, and then re-set it to boot from the hard disk and then start the computer to boot successfully.

Solution: Under DOS, enter:

fdisk/mbr

If Windows XP stays stuck on the system screen when you boot up, it may be due to corrupted system files, hardware failures, or virus infections.

Here are some possible solutions:

1.Try entering safe mode. Press the F8 key several times while booting up, and then choose to start Windows in safe mode. In Safe Mode, you can try to repair system files.

2.Use the Windows installation disc for repair. Insert the Windows XP installation disc into the optical drive, press the key given by the computer manufacturer when you turn it on, go to the BIOS settings, and set the optical drive to start the device.

Follow the prompts to enter the Windows installation interface and select the repair option.

3.Check the hardware device. Check whether the hardware inside the computer is faulty, such as hard disks, memory modules, etc. You can try disassembling some hardware devices for troubleshooting.

4.Scan for viruses. Use antivirus software to perform a system scan in safe mode.

If the above methods do not solve the problem, further professional technical support may be required.

In this case, it is recommended to find a professional maintenance personnel to solve it.

If Windows XP is stuck on the system screen when it starts, it could be due to one of the following reasons:

System File Corruption: Some critical system files of Windows XP may have been corrupted or lost, resulting in the operating system not booting properly.

Hardware issues: Problems with your computer's hardware, such as hard drive failure, memory failure, etc., can cause the system to fail to boot.

Virus infection: The computer may be infected by viruses or malware, causing the system to fail to boot properly.

For this situation, you can try the following methods to fix the problem:

Restart your computer and try to enter safe mode, then run System Restore or Fix.

Execute the chkdsk command to check and fix errors on your hard drive.

Run antivirus software to scan and remove viruses or malware that may infect your computer.

If none of the above methods work, consider reinstalling the operating system.

Please note that before doing any of these actions, make sure to back up all your important files and data to prevent data loss.

There are several reasons and solutions:

Overclocking: Overclocking increases the operating frequency of the CPU, and at the same time, it can also make its performance unstable. The solution is to go into the BIOS and turn the CPU back to the normal frequency;

2.Hard drive failure: If the hard drive has too little space left and too many fragments, then the machine is prone to black screen while running.

It is necessary to develop a good habit of regularly organizing your hard drive and removing junk files from your hard drive. If the hard disk is aging or due to improper use of bad sectors and bad sectors, it is necessary to use tools and software to troubleshoot, and if the damage is serious, the hard disk can only be replaced;

3.Driver installation error: When some hardware, such as the driver of the graphics card, is installed incorrectly, it will suddenly crash with a blue screen or black screen when the system is booted into the desktop, check and delete the problematic driver;

4.Virus infection: Viruses and Trojans can drastically reduce computer work efficiency and cause frequent crashes.

In this case, it is necessary to use anti-virus software to conduct a comprehensive anti-virus investigation. Before you check for viruses, make sure that the virus database of your antivirus software is up to date. You can click the "Upgrade" button to upgrade, so as to ensure that the latest viruses can be detected.