What s going on with the Redmi K30 always restarting?

If the phone restarts or shuts down from time to time, you can:

1. Confirm whether there is a problem after installing some software, and try to uninstall the software;

2. Upgrade the system version to the latest;

3. Try to clear data after backup;

4. In "System Update", "Manually select the installation package" to flash the machine;

5. If the above investigations are invalid, after-sales testing is recommended.

Generally, there are several reasons for the automatic restart of the mobile phone, which can be self-checked. 1) Check whether there is a virus on your phone. If the phone suddenly and frequently restarts, it is likely that it is a virus.

You can use the mobile phone security guard to scan and disinfect the mobile phone first, and clean it up. 2) Uninstall some unnecessary software. If there are too many mobile phone installers and too many software running at the same time, it is easy to fail to run and restart.

3) Software conflict issues. If you think about whether you have installed or upgraded any software recently, it is often these software conflicts that cause the system to restart automatically, so you only need to uninstall the software that caused the conflict. 4) Factory reset.

If you can't be sure what software or plug-ins are causing your phone to restart frequently, you can choose to factory reset your phone and save the more important things on your phone before doing so. 5) There is a problem with the SIM card. In addition to the internal software problems of the phone, the hardware problems of the mobile phone can also cause the phone to restart, and the SIM card error is a common hardware problem.

Change a SIM card to the phone and see if there is a reboot to determine whether it is a SIM card problem. 6) Phone battery contact issues. Poor contact of the mobile phone battery will also cause the mobile phone to automatically restart, and you can take it to the mobile phone repair office for consultation and help.

Here's how to recover Redmi phone unlimited restart:Tools Raw materials: Redmik40, MIUI local settings.

1. Click My Settings.

Open My Settings in Settings. Slippery.

2. Click Factory reset.

Click on the list of sheds to let the factory settings be disturbed.

3. Click Clear.

Just click Clear All Data.

Redmi K30 won't turn on can be caused by a variety of reasons, and some common reasons and solutions are listed below:

1.Dead battery: If you haven't charged it for a long time, your phone's battery may already be dead. Try connecting your phone to the charging grab and wait a few minutes before turning it on.

2.System crash: If your phone crashes in use, it may cause your phone to not boot properly. Try holding down the power key and the volume up key (or volume down key) at the same time for about 10 seconds until the start screen for Mi and Redmi appears.

3.Failed flashing: If you've ever tried to flash your phone and failed, it may also cause your device to fail. Try holding down the power key and the volume down key at the same time for about 10 seconds until the start screen of Mi and Redmi appears.

4.Hardware failure: If none of the above solutions work, the bridge mask can be caused by a hardware failure. It is recommended to take your phone to a professional repair center for repair.

Hopefully, these solutions will help you solve the problem of Redmi K30 won't turn on.

Summary. Early Redmi machine, and the battery is removable, you can restart it by directly cutting off the battery.

If it is an all-in-one machine, press and hold the power button for about 5 seconds, and you can force restart, and some models are more than 15 seconds.

You can also force a restart by pressing and holding the power button and the sound up button.

The mobile phone crashes frequently, and after-sales testing is recommended.

Redmi K30 Extreme Commemorative Edition crashed, how to force restart.

Early Redmi machine, and the battery is removable, you can restart it by directly cutting off the battery. If it is an all-in-one machine, press and hold the power button for about 5 seconds, and you can force restart, and some models are more than 15 seconds. You can also force a restart by pressing and holding the power button and the sound up button.

The mobile phone crashes frequently, and after-sales testing is recommended.

Useless. Is the screen on?

Black screen state You're already in a shutdown state.

It just doesn't turn on no matter how you press it.

With the red breathing light on, I don't know what to do.

The crash is when the phone is stuck during use.

But the screen is lit.

You're out of order.

Just find a mobile phone repair shop and ask him to reinstall the power switch for you.

There is also a possibility that the phone is out of battery.

In this case, you will need to charge it for 2 hours. You can turn it on again and try it.

1. The reason for the system, and other system repairs. 2. The temperature of the mobile phone is too high, causing the mobile phone to restart automatically.

3. When the phone uses the phone case, it presses the power button of the mobile phone, causing the mobile phone to restart.

4. Problems with mobile phones and Hu Yan motherboards.

The Redmi K40 solution is as follows:

1. The latest stable version of the system has been updated.

2. Do not use mobile phone cases.

3. To the official after-sales inspection, the specific way is as follows:

Find Xiaomi's official **, click to open, find "Service" at the top of the homepage of the official website, click to enter, find "Apply for after-sales service" under "Self-service", click to enter and select "Quick Application", find your mobile phone order, click "Apply for after-sales" to continue to click on the order of mobile phone products, apply for sales and call royal, select "Maintenance" Fault type and select "Do not turn on or restart fault".

1. The reason for the system, and other system repairs. 2. The temperature of the mobile phone is too high, causing the mobile phone to restart automatically.

3. When the phone uses the phone case, it presses the power button of the mobile phone, causing the mobile phone to restart.

4. Problems with mobile phones and Hu Yan motherboards.

The Redmi K40 solution is as follows:

1. The latest stable version of the system has been updated.

2. Do not use mobile phone cases.

3. To the official after-sales inspection, the specific way is as follows:

Find Xiaomi's official **, click to open, find "Service" at the top of the homepage of the official website, click to enter, find "Apply for after-sales service" under "Self-service", click to enter and select "Quick Application", find your mobile phone order, click "Apply for after-sales" to continue to click on the order of mobile phone products, apply for sales and call royal, select "Maintenance" Fault type and select "Do not turn on or restart fault".

Summary. Hello dear, the Redmi phone keeps turning on repeatedlyThe solution is as follows: 1. Confirm whether the battery is plugged in. It may be a poor contact. (Except for meters 3, 4 and other batteries that are not removable).

2. Sanqing data. Go to Recovery. Ways to get into recovery:

In the shutdown state, first press and hold the "Volume Up Button" and then press and hold the "Power Off Button", and let go when the boot screen appears, and then you can enter recovery. If you can enter recovery, please switch the system under recovery and back up the data, if it can't be successful, you need to erase all the data (contacts, text messages, phone apps, etc. will disappear).

3. There is a problem with the mobile phone system and cannot be recognized. Whether it can enter fastboot. Ways to get into fastboot:

In the shutdown state, first press and hold the "Volume Down button" and then press and hold the "Power Off button", and then let go when the boot screen appears, and you can enter fastboot. Please connect your mobile phone to the computer and flash a complete system package with the method of miflash.

4. Mobile phone hardware problems. At this time, the only way to take the phone to the repair office for maintenance is to do so.

Redmi K30 keeps turning on in a loop, and it doesn't work.

Hello! Brother Pin is very happy to be able to serve you, we have seen your questions, and are trying to sort out the information for you, and reply to you within five minutes, thank you! ^

Hello dear, the Redmi phone keeps repeating the boot solution or calling as follows: 1. Confirm whether the battery is plugged in. It may be a poor contact.

Except for meters 3, 4 and other batteries that are not removable) 2, three clear data. Go to Recovery. Ways to get into recovery:

In the shutdown state, first press and hold the "Volume Up Button" and then press and hold the "Shutdown Button", and then let go when the boot screen appears, and then you can enter the recovery. If you can enter recovery, please switch the system under recovery and back up the data, if it can't be successful, you need to erase all the data (contacts, text messages, phone apps, etc. will disappear). 3. There is a problem with the mobile phone system and cannot be recognized.

Whether it can enter fastboot. How to enter fastboot: In the shutdown state, first press and hold the "volume down button" and then press and hold the "shutdown button", and let go when the boot screen appears, you can enter fastboot.

Please connect your mobile phone to the computer and use the miflash flashing method to flash a complete system. 4. Mobile phone hardware problems. At this time, the only way to take the phone to the repair office for maintenance is to do so.

Redmi K30 keeps turning on in a loop, and it doesn't work.

Hello, the reasons for the constant restart of the brand's mobile phone and the corresponding solutions are as follows: 1. The reasons for the continuous restart of the brand's mobile phone are as follows: 1. Hardware failure or hardware conflict, poor hardware contact, etc.; 2. Software failure, conflict between software and hardware, or conflict between software and software.

2. The solutions corresponding to the reasons are as follows: 1. Hardware failures are usually not easy to solve, and some of the causes of failures may be problems that have occurred in the production process of the mobile phone, and the manufacturer should be contacted immediately for warranty; 2. The solution to the conflict between software and software or software and hardware is to restore the factory settings (see the third point for details of the recovery method), observe whether there is still a problem with the mobile phone without installing any software before the state, if there is no software problem, you should contact the after-sales service immediately for maintenance. 3. The method of factory reset is as follows:

1. Press and hold the power clearing button to turn off; 2. Press and hold the volume down button and the power button at the same time. After the boot interface appears, release the two buttons to answer and close friends; 3. Through the volume up and down, select Factory Reset, and when the options appear, select OK; 4. Select Clear System Cache after automatically returning to the menu; 5. Finally, select Restart.

You can:

1.You can wait for the MIUI word to appear during the boot process, immediately press and hold the volume down button, do not release the volume down key before entering the lock screen, at this time the phone will enter safe mode, at this time the phone will block all applications, if the phone is not abnormal in safe mode, it is likely to be caused by some third-party apps installed on your phone. Confirm the software you have recently installed and try to uninstall the software;

2.If the ambient temperature of the mobile phone is too low, it may cause automatic shutdown and restart, and it is recommended that you use the mobile phone at a suitable temperature.

4.Upgrade the system version to the latest version;

5.Clear data after backup attempt.