How to book the timer for the week, how to use the timer

yuoilin

From the electronic digital certification team 2018-10-16The method of adjusting the timer time: 1. Adjust the day of the week: press the [clock] button first, and then press the [day] button to adjust to the current day of the week.

Each press adds 1 day, and long press can be quickly adjusted. 2. Adjust the hour: press the [Clock] button first, and then press the [Hour] button to adjust to the current hour value.

Each press adds 1 hour, and a long press can be quickly adjusted. 3. Adjust the minute: press the [Clock] button first, and then press the [Minute] button to adjust to the current minute value.

Each press adds 1 minute, and a long press can be quickly adjusted. 4. Adjust daylight saving time: The timer comes with a daylight saving time function, which can be selected, and is not turned on by default.

Operation method: Press and hold the [Clock] button for 3 seconds, the current time will be increased by 1 hour, and the LCD screen will display the words "Daylight Saving Time" to enter the daylight saving time function; Press the [Clock] button for another 3 seconds, the current time will be reduced by 1 hour, and the LCD screen will cancel the display of the words "Daylight Saving Time" and exit the daylight saving time function. Additional Information:

Types of timers 1. Turn-on delay type timer: Turn-on delay timer is the most common and basic timer in various PLCs, and this timer is called SD type timer in Siemens PLC. 2. Disconnect the time-delay timer:

This timer has no delay effect when the input condition 00000 is on, and only produces a delay effect when the input condition 00000 is off. In Siemens' PLC, it is called an SF type timer. 3. Hold-on timer timer:

This timer is when the input condition 00000 is on, that is, the latching function is generated, even if the input condition 00000 becomes off again, still depending on the input condition is on, when the current value of the timer is equal to the set value, the timer acts, this timer is in the PLC of Siemens, called SS type timer. 4. Pulse timer: This timer is when the input condition 00000 is on, the timer acts instantly, but after the time set by the timer, even if the input condition 00000 is still on, the timer becomes off.

That is, the maintenance time of this timer on state is determined by the set value. If the duration of 00000 is less than the set value of the timer, the ON state of the timer is maintained for the duration of the input condition 00000 as on. This type of timer is in Siemens' PLC and is called an SP type timer.

5. Extended pulse timer: The difference between this timer and the pulse timer is that as long as the input condition 00000 appears in the ON state, no matter how long it lasts, the maintenance time of the timer for ON can be consistent with the set value of the timer. This type of timer is called an SE type timer in a Siemens PLC.

Method used by the timer:

Set a period of time in the timer, click Start to start the countdown, and make a sound to remind you that the countdown is over.

1. Clock function plate. Open the clock, and you can see that it is divided into four functional sections in the title bar, namely: alarm clock, clock, stopwatch, and timing;

2. Timer. Timer, refers to the countdown, here set a period of time such as 30 minutes, click start it will start the countdown from 30 minutes, after 30 minutes end, a sound will be issued to remind that the countdown has ended;

3. Clock. Here you can see the local time around the world at the same time, click on the plus sign to add a city;

4. Stopwatch. Tap the start icon to start the timer, which is the type of stopwatch used for sports test timing, which can be timed in segments and fractions.

The method of using the timer, here is an example of a Meizu mobile phone:

Step 1: First open the clock, you can see that it is divided into four functional sections in the title bar, namely: alarm clock, clock, stopwatch, and timekeeping.

Step 2, the third is timing, the timing here refers to the countdown, here set a period of time such as 30 minutes, click start it will start the countdown from 30 minutes, after 30 minutes is over, a sound will be issued to remind that the countdown has ended.

Step 3, the first one is the clock, where you can see the local time of the world at the same time, click the plus sign to add the city.

Step 4, the fourth is the stopwatch, click the start icon to start timing, sports test timing is used in this kind of stopwatch, it can be split timing and fractional timing.

Step 5, the second is the alarm clock, that is, to select a future point in time, when this time, it will sound or vibrate to remind.

As follows:

1. Select the function status. After the timer is powered on, it will automatically enter the function selection state, and automatically select the function, at this time, the function can be selected according to the needs of the experiment, and a function can be replaced every time the "select or reset" button is pressed. The displayed function serial number is added.

Once you have selected the function you want to use, you can stop pressing the button.

2. Timing status. After the function is selected, the experiment can be started, as long as the light is shaded at the photoelectric door, the computer timer will enter the timing state. Start or stop the timer according to the internally set program.

3. Display status. When the timer ends, it will enter the display state. According to the size of the timing value, the microcontroller automatically selects seconds or milliseconds as the display unit. When you select a millisecond display unit, the "ms" indicator lights up. Select the unit in which seconds are displayed.

A timer is a device that uses a specific principle to measure time. A timer can be used to help you solve these problems. The easy-to-use operator interface provides basic timing control functions, including:

Start timing, stop timing, continue timing, the operation interface is easy to use, reset zero, and adjust timing.

Electromagnetic dot timer is a kind of timing instrument that uses AC power supply, its working voltage is 4-6V, the frequency of the power supply is 50Hz, and it beats the dot every other day. Working principle: When the coil of the electromagnetic dot timer is energized, the coil generates a magnetic field, the oscillator in the coil is magnetized, and the oscillator moves up or down under the action of the magnetic field of the permanent magnet, because the direction of the alternating current changes twice per cycle.

Here's how to use it:1. If the conventional double-row or three-row stopwatch, then please find the on-off switch of the stopwatch and turn it on before using it, because the double-row or three-row 1 1 stopwatch can be turned on and off by itself.

2. Confirm that all the displays on the second surface show zero, and the status screen of the see stopwatch is turned on.

3. Then press the "Start Stop" button on the stopwatch to start the timer.

4. Press the "STOP" button again, and you can press these buttons when you need the stopwatch to stop.

Press first and then press again.

Let's be clear, what a timer.

The usage of the timer is as follows:Tools Raw materials: iphone12, timer.

1. Open the [Clock] software on your mobile phone.

2. Then click [Timer] in the lower right corner.

3. Select the time you want to time, and click [Start Timing].

4. Finally, the chronograph function can be used.

1.First, turn on the clock. In the title bar, you can see that it is divided into four functional sections, namely: alarm clock, clock, stopwatch, and timer.

2.The third step is timing. The timer here refers to the countdown. Set a period of time here, say 30 minutes. After clicking Start, a countdown will start at 30 minutes. After 30 minutes, there will be a sound to remind you that the countdown is over.

Step 3. The first one is the clock, where you can see the local time around the world at the same time. Click the plus sign to add a city.

Step 4. The fourth is a stopwatch. Click the start icon to start the timer. This type of stopwatch is used for sports test timing, which can be timed in segments or timed.

Step 5. The second is the alarm clock, which is to choose a future point in time first. When this time comes, it will make a sound or vibration to remind you.

Dear, hello spike dregs, I am glad to answer for you, the time adjustment method of the timer varies depending on the type of timer. Here are a few common ways to adjust the time of a timer:1

Mechanical timers: Mechanical timers usually have a knob and pointer that can be rotated to adjust the timer's time. First, turn the knob to the "0" trillion grip position, then turn the knob clockwise or counterclockwise to set the desired time, and finally point the finger to the set time.

2.Electronic timer: The electronic timer generally has a digital display screen and operation buttons, which can be used to set the time of the ethnic celebration timer.

First, press the "mode" or "set" button to enter the setting state, then use the number keys or up and down arrow keys to set the timer, and finally press the "start" or "on off" button to start the timer. 3.Mobile app timer:

The mobile app timer usually needs to install the timer app on the mobile phone**, and then adjust the time through the app interface. After opening the app, select the type of timer you want, enter the settings page, and adjust the time by swiping to set and start the timer. It should be noted that when adjusting the timer time, you should pay attention to choosing a clear number, and when the adjustment is completed, you should check whether the time is set correctly before starting the timer, so as not to affect the use of the timer.

Hello, the timer adjustment method varies according to different timer types, and the following is a few common timer adjustment methods for reference: 1Make a virtual machine timer next to the machine:

The time is usually adjusted by turning the knob on the dial or by pulling out the crown. 2.Digital Timer:

The setting mode can usually be entered by pressing the setting button, and then using the plus or minus buttons or rotating the knob to adjust the time. Please follow the specific operation steps in the manual. 3.

Phone or PC app timer: You can usually enter setup mode by tapping on the settings option on the screen, then using the numeric keypad or slider to adjust the time. Regardless of the type of timer, in order to adjust the time correctly, please refer to the specific operation steps in the manual.

The method of using the timer, here is an example of a Meizu mobile phone:

1. First of all, open the clock, and you can see that it is divided into four functional sections in the title bar, namely: alarm clock, clock, stopwatch, and timekeeping.

2. The third is timing, the timing here refers to the countdown, here you set a period of time such as 30 minutes, click start it will start counting down from 30 minutes, and after 30 minutes, it will make a sound to remind that the countdown has ended.

3. The first one is the clock, where you can see the local time of the world at the same time, click the plus sign to add the city.

4. The fourth is a stopwatch, click the start icon to start timing, this kind of stopwatch is used for sports test timing, it can be timed in sections and times.

5. The second is the alarm clock, which is to select a future time point, and when it reaches this time, it will sound or vibrate to remind you.

Dear and hello, the time adjustment method of the timer varies depending on the brand and model, and the following is the basic time adjustment process:1First make sure that your travel timer has a time adjustment function.

If there is, it is usually marked with words such as "time set" or "set clock" on the device's digital panel or buttons. Middle band 2Press the "Time Set" button on your device or select the "Set Clock" option, and the current time should be displayed on the dashboard.

3.Use the device's time adjustment button or combination button to adjust the time between the benches. Typically, these buttons include "hour" and "minute" or numeric keys.

4.After adjusting the time, press the confirmation button such as "OK" or "SET" to save the settings. 5.

If the timer has other adjustable options, such as an alarm, timer, or countdown function, you can set it according to your device's manual.