Why does my Swiss Inage watch stop every day, depressed

1. Insufficient kinetic energy: The watch is not winded enough, and the kinetic energy is insufficient. In particular, automatic watches require more arm movement, and the winding efficiency is very low. If you usually exercise a little bit, you can wind it manually, which can ensure enough kinetic energy.

2. Gear failure: Gear train failure such as deviation wheel and center wheel failure will lead to the condition of stealing stop of the watch. These situations are often not easy to detect and require disassembly, careful inspection and testing to find out the problem and solve the problem.

3. Lack of maintenance: mechanical watches should be maintained every 2-3 years or so. If it is not maintained for a long time, a large amount of oil sludge will be generated inside. Friction between gears increases, causing slippage.

Hello, glad to answer for you!

Reasons for inaccurate time: insufficient kinetic energy reserve of the watch, insufficient battery of the watch, the watch has been hit or hit by an external source, the watch has not been maintained for a long time, and the watch is affected by magnetic fields.

Solution: It is necessary to go to the after-sales center for testing and maintenance.

It may be that the watch is flooded, and you have to go to a regular Inage watch store in the national chain for repair, as long as it is true, there is generally no major problem.

Are you taking a bath with you, 50-meter water resistance can't take a bath.

There are two cases, one. The single clockwork has to be wound up to go, and it stops when it doesn't wind. Two. Double-clockwork automatic watches will only move the watch hands, and now it is generally a double-clockwork automatic watch, which must be worn on the hand or held in the hand and shaken a few times before leaving.

It is recommended that you can open the warranty coupon attached to the purchase of the watch, under normal circumstances, there will be a service address on the warranty copy, or find a regular watch service center for testing and maintenance of the address of the store, etc., if there is a professional after-sales maintenance center nearby. For more information about watch repair questions and related information, you can click **Consultation or Dial** for consultation to provide you with professional watch repair services.

There are two cases, one. The single clockwork has to be wound up to go, and it stops when it doesn't wind. Two. Double-clockwork automatic watches will only move the watch hands, and now it is generally a double-clockwork automatic watch, which must be worn on the hand or held in the hand and shaken a few times before leaving.

The reason why the mechanical watch stops is that if it stops under the premise that it has not been bumped, it is usually due to a lack of power, you can fill the mainspring every morning to see if there is still such a stoppage. If this is still the case, it is recommended that you go to a professional repair shop and let the master check it. In addition, the mechanical watch should be fully maintained in 3-5 years, and the oil should be washed and lubricated to ensure that the internal parts of the movement can operate normally.

1.When the mechanical watch is not man-made, most of them are because the watch is not lacking in skin, resulting in the watch falling to the ground or being violently impacted and causing damage to the parts in the watch. Make sure your watch is powered**.

2.When the mechanical watch does not go due to natural wear and tear, most of the watch grip battery is out of power or the oil sludge in the watch is dry and hinders the watch from running, and the maintenance of the watch only needs to replace a new battery or re-rub the oil on the watch movement parts.

Reason for watch stealing:

1. If the watch is placed for too long or the daily arm activity does not meet the requirements of the watch winding, the watch will cause the mainspring to be insufficient due to winding, which will cause the watch to be unstable or stop when not worn at night.

2. Accidentally knocking or falling on the watch in daily use will also lead to the theft of the mechanical watch.

3. The failure of the hairspring is also one of the reasons for the stealing of the mechanical watch when it is running normally.

Hello, the simple mechanical watch is winding, the mechanical watch does not go when the first consideration of the spring is not enough, as long as the spring is full, the button on the side of the mechanical watch, clockwise rotation of the button on the side of the clockwork, there is a magnetic sound, usually rotate 30 times means that the spring is full;

There is a roulette wheel in the automatic mechanical watch, which is driven by the rotation of the human wrist, the user must wear it every time, and have a certain amount of wrist activity.

There is also the quality problem of the watch or the long-term use of the parts is not good, the movement needs to be re-cleaned and oiled, you can go to the mechanical watch maintenance center, find a professional maintenance person to solve.

Hello, it is possible that the watch is magnetized or the power is insufficient. Once the magnetism on the watch is all of a sudden, it goes very fast, even 1-2 hours a day. When wearing mechanical watches, pay attention to keep away from magnetic fields, such as stereos, televisions, mobile phones and other electrical appliances.

Magnetization is a common phenomenon nowadays, and the solution is not difficult, just go to the watch for repair and demagnetization, or bring your own demagnetizer, it only takes 30 seconds to demagnetize the watch, and there is no impact on the performance of the watch.

For the handling of mechanical watches, demagnetization is the first priority, and it must be neat and thorough demagnetization; Then check the position error of the watch, continue to check the hairspring, clean the hairspring with alcohol, it will be more fuel and tidy, volatile is good, and the low-quality fuel and magnetic field will make the hairspring show up to circle or attract each other. It is best to do a timekeeping quiz on the repaired watch, and it is best to do a long-term dynamic check to see which all-round rotating experimental rack is to be put on, or to wear it directly to check carefully. If it is a deeply hidden problem, we can only detect it with the help of relevant instruments.

Reasons:1This is a problem with the watch's timing error.

There are many factors that affect the timing error of a watch. Altitude, temperature, water resistance, wearability, etc. will all affect the timing error of the watch.

2.It could be a movement problem, the hairspring was deformed. You can go to the maintenance point to see, if you buy it at the counter, go to the counter.

3.The watch is magnetized, and it is okay to go to the after-sales market to eliminate the magnetism, and be careful not to contact the magnetic field for a long time.

In fact, the watch is quite normal for things to have mistakes, because of gravity, changes in temperature can cause the effects of so the watch going time. If the error range of the value is within the standard range of the watch (the requirement for Swiss mechanical watches imported by the AQSIQ is plus or minus 15 seconds days), I suggest that you do not adjust it, because if the watch is bought new, it will be better if you need to go, but if you really have special requirements to adjust, you can go to the technician of a professional watch repair shop to open the back cover and find the adjustment.

[Watch maintenance and repair can refer to the service center of Xidan Joy City Office Building, Xicheng District, Beijing, to provide Inage watch strap customization, cleaning and maintenance, identification, refurbishment, fault repair, watch appearance and replacement of damaged parts, strap replacement services. Our technicians have undergone strict professional skills training and provide two years of after-sales guarantee services. The service center is guided by the watch manufacturer on the spot**, **transparent, no hidden consumption, no additional charges.

1. The speed of the mechanical watch is mainly determined by the pendulum frequency, usually the larger the pendulum amplitude, the smaller the pendulum frequency, and the smaller the pendulum amplitude, the greater the pendulum frequency. Generally, watches rely on the retraction and release of the hairspring to control the swing, which is the basic principle of adjusting the speed and slowness. If the hairspring is longer, the swing will increase, the frequency will be smaller, and the watch will be slower; Conversely, the more the pendulum frequency increases, the faster the watch will be.

2. The structural problem itself, due to the gravitational force of the earth, the offset of the horizontal position and the vertical position will produce a displacement, the mainspring is tightened from the top to the relaxation, the torque is unbalanced, and the external temperature, magnetic field, vibration, etc., even if the mechanical watch increases some frequency, it is impossible to achieve the accuracy of the quartz electronic watch.

3. The effect of the magnetic field, after the hairspring is magnetized, the circle between the rings is only shown when wearing, there is a sticky or short-term lap, especially in the façade, the hairspring will hang down due to its own gravity, and the shaking of the arm will intensify its radial movement, and the magnetic energy utility is shown because of this.

4. The balance of the balance wheel and the balance spring, especially the balance wheel, the balance wheel is very poor, which will cause the balance wheel to highlight the precision change of the surface under a certain swing.

There are several reasons why the watch suddenly becomes faster:

For example, if the wearer has a violent movement acting on the balance wheel, which increases the rotation amplitude of the balance wheel, it will cause the watch to swing and speed up the time.

In addition, the magnetization of movement parts is also one of the main reasons for the speed of the watch.

An important indicator of the performance of the watch is the position error, that is, there will be a certain error in the running time of different facades. The factors that affect the position error mainly lie in the balance between the balance wheel and the balance spring, if the balance wheel is not well balanced, it will lead to a slight difference in the swing width of the balance wheel in a certain position, and finally affect the accuracy of the timekeeping. In addition, gaps, lubrication, friction and wear between the wheel trains can cause large errors in the watch only in certain positions.

If the watch has been subjected to a collision in the past, there is also a problem that the secondary outer ring of the hairspring may touch the outer pile of the hairspring, which occurs on the façade and in dynamic form, and is also one of the problems that affects the walking at hand.

Room 2405, SAC Sichuan Aviation Plaza, No. 6 Renmin East Road, Jinjiang District, Chengdu.

Reasons and solutions for the watch not going out of time:

1. Insufficient power reserve. You need to check whether the power is sufficient, if the amount of movement of the self-winding mechanical watch is small, it may also cause insufficient power reserve, you can supplement the power by manual winding, and then observe whether there is a phenomenon of speed and slowness, if it is still recommended to go to the store for testing.

2. The power is insufficient. If the quartz watch suddenly finds that it is slowing, it is likely to be caused by insufficient battery energy.

3. Having been beaten or impacted. The watch is very tight, and if it is hit or dropped, it may cause loose damage to the internal parts, and it may also cause problems with timekeeping.

4. Maintenance is required. A lack of oil or wear and tear of the internal parts of the movement can cause time-keeping problems and require maintenance.

5. Under the influence of ambient temperature, the watch is magnetized: if the hairspring of the watch is magnetized, the watch will not be accurate. The influence of the wearer's usage habits may cause an increase in the error of the time, which will be sent to the store.

Note: 1. Mechanical watches vary according to the model and manufacturing quality of the movement, and the error of the general watch within 30 seconds per day is within the normal range. Some of the higher precision movements can reach around 10 seconds.

2. Generally speaking, the accuracy of quartz watches is high, and the Swiss standard is that the monthly error is within 15 seconds. Some precision movements can be within a few seconds per year.

When the watch is not gone, take it to the store to check what the reason is.

1.When the mechanical watch does not go due to artificiality, most of them are due to improper wearing, resulting in the watch falling to the ground or being violently impacted and causing damage to the parts in the watch. Make sure your watch is powered**.

2.When the mechanical watch does not go due to natural wear and tear, most of the watch batteries are out of power or the oil sludge in the watch is dry and hinders the watch from running, and the maintenance of the watch only needs to replace a new battery or re-rub the oil on the watch movement parts.