What is the reason for the weakness of FAW Xenia S80 speed?

Updated on Car 2024-02-08
26 answers
  1. Anonymous users2024-02-05

    Hello, this situation may be the reason why the throttle is too large, you can go to the 4S shop to clean the throttle, clean the fuel injector, and check the ignition performance of the spark plug.

  2. Anonymous users2024-02-04

    Hello, the vehicle is weak to speed up, considering that the vehicle throttle is too dirty or the spark plug gap is too large, it is recommended that you go to the repair shop to clean the throttle, check the spark plug, if the gap is too large, you need to replace the new spark plug!

  3. Anonymous users2024-02-03

    Hello, it is possible that the engine is too old. If it is caused by too much carbon deposit, clean the throttle, replace the spark plug, fuel injector, and change the oil a little better.

  4. Anonymous users2024-02-02

    Hello, FAW Xenia S80 This car has a weak acceleration situation, which should be caused by too much carbon deposition in the engine.

  5. Anonymous users2024-02-01

    First of all, check the ignition clearance of the spark plug, and take another check of the fuel pressure and three-way catalysis to see if there is a problem? Then you also need to check if there are any related faults in the engine**? Well, if there is, according to the cause of the fault **, the other thing is to check the quality of the gasoline.

  6. Anonymous users2024-01-31

    This may be a long-term driving and there is a lot of carbon accumulation inside the engine, so you can clean the throttle or fuel injector, which may be alleviated.

  7. Anonymous users2024-01-30

    If the motor vehicle is unable to accelerate, it may be caused by excessive carbon deposits in the engine or throttle of your vehicle.

  8. Anonymous users2024-01-29

    Hello, if the speed can go up and the speed can not get up, it is recommended to check the three-piece set of the clutch, if the speed can not go up, it may be that the oil pressure of the oil pump can not reach, and then clean the throttle fuel injector.

  9. Anonymous users2024-01-28

    This is generally the reason for the insufficient pressure of the oil pump, replace the oil pump, clean the fuel injector and replace the spark plug.

  10. Anonymous users2024-01-27

    Hello, if the acceleration is weak, it is recommended to check the spark plug first to check whether there is a lack of fire in the engine. Then clean the throttle.

  11. Anonymous users2024-01-26

    Hello, FAW Xenia S80 This car is weak in speed, you can check the carbon deposit of the engine, and clean it if necessary.

  12. Anonymous users2024-01-25

    Hello As you said, in this case, it is recommended to check if there is a problem with the ignition and whether the gasoline pressure is normal, check whether there is a problem with the spark plug ignition coil and fuel injector.

  13. Anonymous users2024-01-24

    In this case, it is considered that it is caused by carbon deposits, and it is recommended to check whether the throttle injector spark plug has serious carbon deposits.

  14. Anonymous users2024-01-23

    Hello, this suggestion is to check whether the spark plug, throttle, and fuel injector are carbon deposits, and clean them in a professional store.

  15. Anonymous users2024-01-22

    Generally speaking, if you can't increase the speed after using it for a period of time, you need to check whether it is the reason for more carbon deposits.

  16. Anonymous users2024-01-21

    If the FAW Xenia S80 car is weak in speed, it is recommended to clean up the engine carbon deposit, which should be better.

  17. Anonymous users2024-01-20

    This is a manufacturing problem, you see if his same car has such a problem, if so, then wait for the manufacturer to improve the technology.

  18. Anonymous users2024-01-19

    Hello, if the vehicle is unable to accelerate, it is best to clean the throttle injector and replace the spark plug.

  19. Anonymous users2024-01-18

    Hello, you can see if this situation is caused by the problem of carbon deposition in the engine, you can refer to it.

  20. Anonymous users2024-01-17

    According to your situation, this is generally caused by insufficient oil supply or excessive carbon deposits in the engine.

  21. Anonymous users2024-01-16

    FAW Xenia S80 can be said to be a lot of non-Senyin bends: 1. The gear is not easy to change, it is always a little stuck, and it is necessary to slow down when turning this boring corner, I don't know whether it is the design problem of the clutch and throttle or the problem of the driver;

    2. There is always a sense of frustration after changing gears, and there is a five-seat rear seat, which can be made into a track type that can be pulled back and forth, otherwise the space is too small, and the brakes are too soft;

    3. The shock absorption is too hard, the start is weak, and the engine is not imported at all, but the engine that came off the assembly line of Weichi was also brilliant a few years ago;

    4. FAW shouldn't fool people like this, this aspect is not authentic enough, the sadness of the Chinese people, the quality of the production is not as good as Wuling and Chang'an, and it is really a trick for FAW to compare any aspect;

    5. The interior is average, noisy, and the starting idle speed is too large! The body is too narrow, the distribution of service stations is too small, we do not have a local after-sales service, after-sales in other model stores, the level of after-sales is also average, the service is average, after all, people are not based on this car-based after-sales service station.

    Millions of car purchase subsidies.

  22. Anonymous users2024-01-15

    FAW Xenia S80 can be said to have a lot of problems: 1, the gear is not easy to change, always a little stuck, and you have to slow down when turning, I don't know whether it is the design of the clutch and throttle or the problem of the driver, the speed is always frustrated after changing gears, and there is a five-seat rear seat, which can be made into a track type that can be pulled back and forth, otherwise the space is too small, and the brakes are too soft;

    2. The shock absorption is too hard, the start is weak, the engine root is not imported from Shisen Yinbend, but the engine of Weichi off the assembly line, a few years ago it was also brilliant, FAW should not fool people like this, this aspect is not authentic enough, the sadness of the Chinese people, the quality of the production is not as good as Wuling and Chang'an, just compare any aspect, it is really a pit FAW;

    3. The interior is average, noisy, and the starting idling speed is too large! The body is too narrow, the distribution of service stations is too few, we have no dedicated after-sales service in this local, after-sales service in other model stores, the level of after-sales is also average, the service is average, after all, people are not based on this car-based after-sales service station.

    Millions of car purchase subsidies.

  23. Anonymous users2024-01-14

    Summary. Hello, I am happy to answer your car master exclusive technician to answer your car questions sincerely and sincerely for you, and find solutions and methods for you to ask questions. Automatic transmission Xenia S80 This problem is caused by the slippage of the gearbox, you can first check whether the gearbox is short of oil and oil quality, you can change the gearbox oil after cleaning the valve body, if it still doesn't work, you need to check whether the internal friction plate is slipping, I hope my reply will help you.

    Hello, happy to answer your questions.

    Hello, I am happy to answer your car car master exclusive technician attentively and sincerely answer your car questions, and find solutions and methods for you to ask questions. Automatic transmission Xenia S80 This problem is caused by the slippage of the gearbox, you can first check whether the gearbox is short of oil macro disturbance and oil quality, you can clean the valve body and then change the gearbox oil to try, if it still doesn't work, you need to check whether the internal friction plate is slipping, I hope my reply will help you.

  24. Anonymous users2024-01-13

    1.The quality of the FAW good Shoumori Nagayumi S80 is not very good, quite poor: 1.

    2.The gears are not easy to change, and they are always a little stuck. Slow down when turning.

    3.I don't know if it's the design of the clutch and throttle or the driver's problem.

    4.There is always a sense of frustration in speeding up, and there are five rear seats, which can be made into a track type that can be pulled back and forth, otherwise the space is too bad Sun Xiao's brakes are too soft; 2.The shock absorption is too stiff and the start is weak.

    5.The engine is not imported at all, it is the off-line engine of Vios.

    6.It was glorious a few years ago.

    7.FAW shouldn't fool people like this.

    8.This aspect is not authentic enough, and the people of the country are sad.

    9.The quality of the products made is even inferior to Wuling and Chang'an hunger socks chain.

    10.It's really FAW cheating.

    1,3, the interior is average, the noise is too high, and the starting idle speed is too large! The car body is too narrow and there are too few service stations.

    12.We do not have exclusive after-sales service locally.

    13.The after-sales service of other car shops is also average, and the service is average.

    14.After all, people are not based on the after-sales service station of this car.

  25. Anonymous users2024-01-12

    The quality of the FAW hood nuclear brigade Xenia S80 is not very good, relatively poor: 1, the gear is not easy to change, always a little stuck, and you have to slow down when turning, I don't know if it is the design problem of the clutch and throttle or the problem of the driver, the speed is changed to the end of the gear, there is always a sense of frustration, and there is a five-seat rear seat, which can be made into a track type that can be pulled back and forth, otherwise the space is too small, and the brakes are too soft;

    2. The shock absorption is too hard, the start is weak, the engine is not imported at all, but the engine of Weichi off the assembly line was brilliant a few years ago, FAW should not fool people like this, this aspect is not authentic enough, the sadness of the Chinese people, the quality of the production is not as good as Wuling and Chang'an, no matter which aspect is compared, the stool is really a pit of FAW;

    3. The interior is average, noisy, and the starting idling speed is too large! The body is too narrow, the service station is too few, we have no dedicated after-sales service locally, after-sales in other model stores, the level of after-sales is also average, the service is average, after all, people are not the main after-sales service station of this car.

    Millions of car purchase subsidies.

  26. Anonymous users2024-01-11

    1.The quality of the FAW good Shoumori Nagayumi S80 is not very good, quite poor: 1.

    2.The gears are not easy to change, and they are always a little stuck. Slow down when turning.

    3.I don't know if it's the design of the clutch and throttle or the driver's problem.

    4.There is always a sense of frustration in speeding up, and there are five rear seats, which can be made into a track type that can be pulled back and forth, otherwise the space is too bad Sun Xiao's brakes are too soft; 2.The shock absorption is too stiff and the start is weak.

    5.The engine is not imported at all, it is the off-line engine of Vios.

    6.It was glorious a few years ago.

    7.FAW shouldn't fool people like this.

    8.This aspect is not authentic enough, and the people of the country are sad.

    9.The quality of the products made is even inferior to Wuling and Chang'an hunger socks chain.

    10.It's really FAW cheating.

    1,3, the interior is average, the noise is too high, and the starting idle speed is too large! The car body is too narrow and there are too few service stations.

    12.We do not have exclusive after-sales service locally.

    13.The after-sales service of other car shops is also average, and the service is average.

    14.After all, people are not based on the after-sales service station of this car.

Related questions